How to rename channels on lg tv

1. To start setting, press the SETTINGS button on the remote control.

2. In the window that appears on the TV, select the CHANNELS tab, press the OK button. By pressing the OK button again, select the Auto search item.

3. The Autosearch menu will appear on the screen, in which we select the CABLE TV item and press the OK button.

4. Operator selection point. Select OTHER OPERATORS and click OK.

5. Preset cable TV, remaining on the TYPE item, press the DOWN ARROW button on the remote control.

Set the initial frequency to 298000 (kHz)

Final 800000 (kHz)

6. At the point for selecting search parameters, without changing anything, press the EXECUTE button

7. The process of automatic channel search and its completion. When finished, click NEXT.

8. To complete setting up channels, press the DONE button

Sorting channels

1. To start sorting channels, press the LIST button on the remote control.

2. While in the list that appears, press the RED button on the remote control with one white dot.

3. Select the channel to be moved using the arrows on the remote control. To switch the list of channels from digital to analogue, press the up arrow on the remote control until DIGITAL CABLE TV is highlighted and switch to CABLE TV. After selecting the desired channel, click OK. Next, press the YELLOW button with three white dots.

4. Selecting a new channel position. The selection of a new channel position is carried out using the crosshair arrows on the remote control; if it is a digital channel, then the new channel number can be set using the numbers on the remote control.

The channel will save the new position after clicking the OK button.

Sorting digital channels is done in a similar way

You can see a list of analogue channels for your city here. You can use it as a guide when sorting.

Don't forget to select your city in the top menu of the site.

Modern LG TVs already have built-in digital tuners, so there is no need to purchase digital set-top boxes for a new TV model.

If you are the owner of an LG TV and are having difficulty setting up, follow the instructions below and in a few minutes you will be able to watch your favorite programs in digital broadcast quality.

How to find out if your TV supports digital channels

If you have an older TV model, you need to make sure that you can receive digital television. This information can be found in the device passport. If you do not have any documents in which you can view the information, you can view the capabilities of the TV on the Internet by specifying your TV model in the search engine of any browser. The easiest way to find out whether your LG TV receives digital channels is to go to the website See Russian Federation Digital. There you need to look at DVB-T2 by selecting your TV model. You can also write your model in the comments.

How to fix the problem?

All instructions for setting up and installing digital channels can be easily found in the printed instructions for the antenna. You may find interesting information on the Internet. Use the short instructions:

in the “Language and Country” section, insert the symbol “-“;
enter the digital indicators yourself;
check the operation of the antenna on the same TV;
destroy data to factory state;
update the software version again.

These simple tips will help make your TV easier to use.

Turning on the TV for the first time

If you purchased a new TV, then when you turn it on for the first time you will need to maintain some data. By entering which you can immediately take advantage of all its capabilities.

Select the menu language from the list provided.
Next, you need to select your country of residence.
We set the time and date. By selecting this item you can use the TV Guide service. This program guide is where you can see what is currently on air or will be on air in a few hours.
If you have a Smart TV, you will be asked to choose how to connect to the Internet, via cable or Wi-Fi. You can skip this step if there is no Internet connection.
Image and sound settings. You can adjust the brightness and clarity of the picture.
Next you will be prompted to start installing channels.
Click ok

Setting up DVB-T2 digital channels

At the moment, digital television is available almost throughout the entire territory of the Russian Federation without a subscription fee. The number of available TV channels is constantly growing, previously only ten digital channels were available, now this figure has doubled, to twenty federal TV channels. However, in Moscow the number of free channels is even greater, since the third multiplex is broadcasting there in test mode.

Automatic search

This is the easiest way to independently configure your TV to receive DVB-T2 digital television. After which you will be able to watch 20 TV channels without any subscription fee.

First of all, connect the antenna cable to the TV.
Next, take the control panel to exit to the main menu
Press the button to call the Setting menu. On many LG SMART TVs you need to press HOME.

In Home mode, find the Settings section.
Next we find the Channels section.
Select the desired setting mode Auto search.

The next step will ask you to select an input source for setting up programs.
Select the Antenna for receiving Terrestrial TV.
Enter the search parameters by checking the boxes next to the desired channels.

Setting up a Smart TV

When purchasing new LG Smart TV household appliances, users can not only watch their favorite shows and movies, but also receive constant access to the Internet. How to set up an LG TV yourself if it supports the Smart function? Setting up the TV is done only after ensuring a stable connection to the World Wide Web via or. By connecting the product to the electrical network and providing a connection to the Internet, you can tune in analog channels or digital TV.

Installation is done as follows:

go into the settings of the Lg TV receiver and select the “Network” item;
select a network connection and click “select” on the screen;
Select the desired type from the list - wired or wireless network, press the update button;
Now the smart product sees the Internet connection, click ready;
We register on a special portal
: create a call sign, enter a password, then a letter arrives by email - you need to open the specified link to confirm all actions;
access has been obtained, go to the Internet using your nickname and password, move on to the main thing - how to set up channels on your LG TV for reception;
install the application “SS IPTV
».

After this, you can directly tune the channels on your LG TV in the same way as the previously discussed method. also has its own nuances. Now you know how to set up digital TV on various models.

Setting up cable TV

To set up cable channels, make sure that your TV receiver supports the DVB-C format. This format is present in many even older LG LCD TV models.

First of all, you need to connect to the provider’s network; to do this, enter into a service agreement. After this, your apartment will be connected to the cable operator's line. When connecting for the first time, the setup is in most cases carried out by company employees. However, you can configure Elgie yourself by learning the broadcast parameters.

On an old TV, you need to select the broadcast country Germany or Finland.

Connect the cable to the TV socket using a plug.
Enter the menu.
Reception mode Cable TV
Select Automatic setup.

Next, select a customer service operator. We select only our operator; if it is not in this list, be sure to click on Others .

Search type, three options will be offered.

Full , scanning all available frequencies.
Fast , it is necessary to maintain the initial broadcast frequency.
Network , enter network parameters.

Network settings.

Start and end frequency, Modulation, Speed, ID. Please check with your service provider for this information.
Search parameters for DTV only, if you need analogue, uncheck the box.
We all click on Start and wait for the end, the process will take more than ten minutes.

What to do if it doesn’t find channels

Damaged cable

Reasons why you cannot find TV channels include:

The TV's home region is not configured.
In the Russian Federation, digital channels are divided into 2 multiplexes, where the second one is not available in all regions of the country. You can view the coverage area and frequencies on the CETV Interactive Map.
The cable is damaged.
Old TVs are not equipped with built-in tuners for receiving digital DVB-T2 and satellite DBV-S2 television.
Check for new TV firmware.
If there was a signal, but disappeared, the antenna or one of the satellite broadcast heads is faulty.
When the image is transmitted with stutters and scatters into squares, redirect the antenna or raise it higher if there are tall trees or houses in the reception path.
Channels may change their place in the saved list due to automatic updating of TV programs (the function is disabled in the settings).

Setting up channels on LG TVs is identical for all types of signal, with the exception of connecting IPTV on models with Smart TV or displaying images from an external tuner. On average, searching for TV channels takes from 5 to 10 minutes.

Setting up satellite channels

To receive satellite broadcasts on the Elgie TV, it must support DVB-S. CI+ slot where you can insert an access card to encrypted channels. The cable coming from the satellite dish must be connected to the LNB socket using the F connector.

Enter the TV MENU.
Auto-tuning
Select the signal source Satellite.
In the list that appears, select your satellite, or skip by clicking on Other.

Next, to configure the programs, select a satellite and configure it

Enter the parameters and click on Next.

We put a checkmark on the search we need and click on execute.

The parameters of the satellite operator can be viewed on its website.

As you can see, you can independently configure your LG TV to any television format. On LG Smart TV, you can also use free and paid IP television; for this, you need to download the desired program from the application store and run it.

How to set up a TV with Smart TV

The presence of a Smart TV on board allows access to the Internet via Wi-Fi or Ethernet cable and downloading applications for viewing IPTV, with which you can enable 4K broadcasting. For this:

Connect your TV to the Internet.
Use the remote control to launch the LG Smart World brand store.
Enter IPTV in the search bar.
A list of applications for watching TV channels online will open. If your Internet provider provides a list of IPTV channels, then it is recommended to download “Simple Smart IPTV”.
After launching the program, a code to access the application will appear.
Ask your operator for the playlist address to access TV shows.
An alternative is to find a free playlist on the Internet.
After the channels appear, click “Save”.

Note! Free playlists are a custom collection of publicly available channels. After a week, month, six months, channels may disappear from the list of available ones, and the list will stop working.

Sorting channels.

After all channels are installed, you can use the editor. In this editor, you can change the serial number of any program, thereby moving your favorite TV channel to another position by performing several steps. Actions must be performed using colored buttons, checking the box in advance. Here you can also delete, rename and lock any TV channel.

It is necessary to disable auto-update of channels, otherwise confusion may occur during the next update on the station.

In this manual, I tried to briefly and clearly explain how to set up an Elgie TV.

The brightness of the image on the TV also depends on the correct initial settings

Order and options for setting up channels

How to tune channels on your TV

Press the “MENU” button on the remote control until “Setup” appears.
Press the button to select the “Manual Mode” function, use buttons 2 (left) or 3 (right) to select the “Manual” mode.
Press the button and use buttons 2 (down) or 3 (up) to select the desired installation level and press the button.
Use buttons 2 (left) and 3 (right) to adjust the desired level.
Press buttons 2 (up) or 3 (down) to check the current settings.
Press the button to exit programming mode.

On the receiver

Press the “Setup” button to turn off the receiver.
Press the "Menu" button on the remote control and then press the "SET" button to set the mode to "Manual" or "Auto".
Press the button or button to move the cursor down.
Press or to select the desired option, then press the button to confirm.
Press the up or down button to set the desired level.
Press the up and down buttons to check the current value.
After completing the setup, press the button to return to the Setup menu.
In Auto mode, press the button on the remote control.
Use the or buttons to select the desired menu line and press ENTER.
Press or to select a parameter, then use the or buttons to set the desired parameter value.
Press ENTER to move up, down, or to the previous screen or exit a menu.

Manual channel tuning

Manual channel tuning is carried out in two steps:

Antenna disconnection. First, you should disconnect the antenna from the TV and, if it is located outside, move it away from the wall. Next, you should unscrew all the screws from it and remove the connector. After this, the antenna is disassembled.
Connecting an antenna to a LG TV or other device. Then you need to connect the power to the antenna or to the TV. This is done using a 3-pin electrical connector. In this case, it is better to remove it first so as not to damage the TV’s power socket. Then you should connect cable TV to the appropriate connector on the TV and turn it on.

After connecting, you can start searching for channels. If you live in a large house with a good antenna, then you can tune in to several television channels at once. In this case, you will have to wait about 10 minutes to conduct the search.

If the signal is weak, then it is better to wait a little longer. Once you have finished searching for channels, you will be able to see them on your TV screen. But don’t expect the channels to start showing right away. For 10-20 minutes they will only be displayed in the “standby” mode. At the same time, they will gradually become available for viewing.

Automatic channel tuning

Automatic channel tuning on an LG or other manufacturer's TV can be done using a special tuner. This mainly depends on the device supporting this feature. But sometimes users cannot set up channels on their own because they do not know how to do it.

To automatically tune channels on your TV, you need to:

Press the TV button on the remote control.
Select from the list of channels the one the user needs.
Click the Setup button and enter automatic search.
Select channels from the TV and fix it.
Repeat steps 2 - 4.

Use automatic channel tuning on your TV. Automatic tuning differs from manual tuning in that in automatic channel tuning, the user does not need to make any changes, but only mark the already configured channels.

In addition, to automatically tune channels, you do not need to know the exact name of the channel; you just need to select the desired channel from the list, which will then be displayed on the TV screen.

If automatic channel setup has been performed and all channels are configured, after pressing the Setup button, you need to go back a few steps and mark those channels that will be excluded from automatic setup. To do this, you need to check the box next to the name of the selected channel.

Next, you need to click the SetUp button. The automatic search will continue and display a list of channels with the changes made. In this list you can delete unnecessary channels, if necessary. Then, you can return to the automatic tuning menu, go to the “Search for channels” item and check the quality of the automatic tuning on all channels.

Turning on your LG TV for the first time

Having purchased the device, you need to start it up immediately after mounting it on a wall or a special shelf to ensure that it is positioned correctly. For these purposes, you must use the manual that comes with the equipment.

With geolocation enabled, it will be easier for the satellite to find the equipment if the country of use is correctly indicated

Interface language settings

It is important to initially choose the correct language design, both for the keyboard and for voice search, which is available on almost all LG models. In addition, these settings determine the language in which the channels will be broadcast. To accurately specify the parameters, follow the step-by-step algorithm:

We connect the TV to the electrical network, then start it using the remote control (remote control). We wait a few seconds until the device is fully loaded, then press the “Home” button. It can be depicted as a “House”.
Open the “Settings” section in the internal menu of the TV, select the “Advanced” sub-item. On the screen it looks like an "ellipsis".
A set of tabs appears. Of these, you should only select “General”.
Open the “Language” section. Here we look carefully so that everything is in Russian.

Screen image

After purchasing a new TV, it’s not enough to know the answer to the question: “How to set up channels on the TV?” Note. Any settings in modern digital technology, be it screen resolution, adjusting the quality of the output image, or adjusting the sound level, are made using the “Service Menu” function. To open it, press the “Menu” button on the equipment control panel.

In addition to answering the question: “How to set up digital channels on a TV?” - It is important to know about image quality. This function is launched by pressing the “Menu” button. Then you should select the “Image” sub-item. This section adjusts the optimal image quality displayed on the digital TV screen. The following parameters are used:

definition;
color;
contrast;
brightness.

By controlling these parameters, they change the scale value of the required parameter up or down, achieving optimal picture quality that is pleasing to the user’s eyes.

Location, date and time settings

The choice of the country in which the TV is used is important. This helps to register the product for official use and select the correct list of television programs and signals.

For these purposes, a remote control is used. You should do all the same steps from points 1 to 3 of the previous section.
Next, go to the “Country” tab.
In the list that appears, search for the state in which we are located, then click the “Exit” button.
To set the date and time correctly, you should follow the same steps as in the previous case, only in the “General” tab you need to open the “Date and Time” section.

Please note that on LG TV there are two types of time for setting

The correct operation of the software depends on how correctly the time is set. In some cases, malfunctions may occur: the television signal stops or the wireless connection is lost.

GOOD TO KNOW!

In the case of timer and stopwatch settings, everything is done individually. Therefore, it is not necessary to specifically set a time period; this can be done directly during the operation of the TV.

Alphabetical settings

For ease of selection, you can set the sorting alphabetically. This type of control will be relevant if the number of connected TV channels is not too large. To build alphabetical filtering

required:

Click "OK". Then the “F2” button, it is green and located in the line of program control buttons.
In the alphabet field that appears on the left of the screen, you need to select the letter with which the list will begin to be formed.
A list of programs will be automatically created on the right.
To save the changes made and exit the menu, click “Exit”.

To make sure that a further list is formed, you need to repeat the procedure, choosing other letters.

LG TV digital channels: general connection rules

Almost all LCD TV models have a built-in digital T2 module. Therefore, there is no need to purchase a separate set-top box. Accordingly, the entire setup will go much faster.

Setting up digital and analogue channels “automatically”

Each TV is equipped with an “Auto Search” function. Using it, it is easiest to perform all kinds of manipulations to install channels on Smart TV. As a result, not only digital, but also analog programs will be found if a corresponding signal is available. This method is popular among those who are easily confused about the settings.

The auto-search function saves the user from entering the data of the received signal

All you need to do is log into the main menu, then simply select the “Automatic program setup” item. After these operations, you need to wait a few minutes until the entire scale reaches 100%, after which you can assign an individual number to each found channel.

On older models

On older LCD TV models, program settings are practically the same

On devices of the previous generation of the LG brand, there is an automatic search option. But many users use manual. The main thing is to choose the right frequency range. The viewer must perform several sequential actions:

Start the TV and go to the “Channels” menu.
Select the “manual tuning” item, then decide on the frequency and type of signal.
Click the “Launch” or “Start” button. After each program has been searched, a notification will appear on the screen.
After this, you need to continue the search procedure.

For some models you have to buy a removable set-top box to connect to public television

In this situation, only those programs will be found whose signal type matches the entered settings.

On the newest models

Searching for channels on LG smart TVs is carried out briefly, so the owner only needs to make instructive settings, and then start the automated process. Here it is important to choose the right type of programs you are looking for: analogue or digital. Sometimes it is easier to do this by specifying the frequency of broadcasting radio waves.

When setting up each channel, the user sees its parameters on the screen. For each individual program setting, you can select the mode of the incoming signal

Upon completion of the search process, the system will automatically number the programs, while paid and encrypted channels will be skipped.

Disabling auto-update

Any smart TV, including LG, has the option of auto-updating software and the operating system as a whole. With regular updates, all configured programs will be reset. To avoid constantly searching for them, you should disable this option:

Go to the “Settings” of the TV, select the “Digital” or “Digital cable” item.
Click “Disable auto-update”.

To update the TV software version, you may need to remove the plug from the TV connector

The settings provide two types of updates: “Now” or “Auto-update”

However, several times a year, the developers recommend running this process. The operating system may become outdated and, in the future, will not accept the installation of some applications. And perhaps it will completely refuse to play video in new formats.

How to set up digital TV channels

Having finished with the preliminary settings, the user can proceed to search for TV channels.

Manually

Manual setting

Manual search parameters differ depending on the region of residence and distance from the nearest signal repeater. Universal setup instructions look like this:

Open Settings and select the tab with the image of a satellite dish.
In the menu that opens, click on “Manual configuration”.
The “Signal Type” section will appear, where you select the antenna.

In the dialog box that opens, set:

frequency H - 247000;
frequency K - 770000;
modulation - 256;
LD - auto.

Put o. The TV receiver will ignore pay TV channels.

All that remains is to select “Quick scanning” and wait for the process to complete, which takes about 2-10 minutes, depending on the distance from the repeater and the performance of the television receiver.

Please note! The website of the CETV Interactive Map indicates the coverage area of regional repeaters and frequencies for searching for digital TV channels.

Automatically

Auto search does not require the user to enter data to search for multiplexes - it checks all possible frequencies from the specified region and adds both digital and analogue TV channels to the list. To initiate automatic verification:

Open the system menu and select Settings.
Visit the Channels tab.
Select "Automatic search" and check the box next to digital broadcast search. Leave the checkbox next to adding analogue TV channels (the quality of the channels is worse).
Tap “Start Search”.

This method takes longer due to the frequency coverage to search, but finds fewer TV shows or adds an encrypted signal. When the process is completed, the user will be able to organize the list of TV channels manually.

Satellite channels on LG TV

For satellite television there are also two channel settings options: automatic and manual. Each of them is carried out according to a separate scheme. Let's take a closer look at them.

Setting up satellite transmissions is carried out in a similar way, only with the specification of a special mode

Auto-tuning on satellite free channels

To search for free programs, you need to follow a step-by-step algorithm on your TV:

You purchase a special set-top box that connects to the HDMI output on your TV.
If the TV model has a built-in receiver, then the satellite antenna plug is connected directly to the connector output.
Go to the “Menu” item and visit the “Channels” subsection.
In the next window, click on the source, selecting “Satellite”, start the process by clicking the “OK” button.
In the “Satellite Settings” section, be sure to select the option by which the search is carried out. Suitable only in cases where several plates are installed.
Click on the “Automatic search” button and wait for the TV signal to complete the operation.

Setting up channels on new LG Smart TV models

All LG TVs released after 2012 come with a built-in digital tuner. There are two ways to configure digital TV channels - automatic and manual.

Automatic method

This setup is the easiest and takes the least amount of time. You just need to follow the following instructions:

Go to the main menu.
Go to the "Settings" tab and run automatic search.
Select the broadcast type - digital or analogue and wait a while until the LG TV finds all available channels and save the result.
Then you can click “Close” and start watching TV.

Manual setting

This method takes much longer, but can be useful if you are in an area with poor signal reception. In this case, follow the following algorithm:

In the settings section, open the “channels” tab and select “manual search”.
In the window that appears, specify the connection type “cable”.
Set the broadcasting region (name of the locality)
In the window that appears, enter the search parameters. The starting and ending frequencies and modulation should be known in advance. It is different in each region
Next, be sure to check the box next to “skip encrypted channels.”
Start scanning and wait until the procedure is completed
Don't forget to save the result and enjoy watching digital TV.

Setting up SMART on LG

If there is no access to traditional analogue or digital channels, the owner can use IPTV television.

In order to set up Internet TV on Smart TVs, you need to thoughtfully approach each point.

To connect the Internet to the TV, you should use a cable. This will allow you to view videos and channels in good resolution.
We go through the registration procedure, indicating a reliable login and password. We confirm the existence of the account via email.
Log in to the system and download the SS application from the online store
Then we launch the program. A code appears on the screen, which must be entered into the appropriate field on the official website. After this, an available playlist will appear for downloading.
The playlist can be downloaded and added to the software on the TV. Instead of downloading, a link to the channel list can be added.
After the completed manipulations, launch the IP assistant and use any channel.

You can tune in to live TV or use recorded broadcasts

This list of programs is subject to editing and replacement. However, you can only get new playlists on the official resource.

Setting up IPTV

Modern LG Smart TVs allow you to watch television via the Internet. This will require concluding an agreement with the provider and setting up the TV. The device is first connected to the Internet, wired or via Wi-Fi - it doesn’t matter. After this, you should do the following.

Using the remote control you need to enter the store - “LG Smart World”.
If you don't have an account, you need to create one.
In the application search bar you need to enter the abbreviation IPTV.
You should select any program from the proposed list; Simple Smart IPTV is considered the most convenient.
After installation, a code will appear that must be entered in the appropriate window (will appear the first time you open the utility).
Next, open the playlist editor and enter the received playlist from the provider. You can find a free option on the Internet, but often they do not work, or not all channels are available. The playlist can be in the form of a file (you will have to open it from a flash drive) or in the form of an Internet link, then the address is simply entered into the appropriate window in the editor.
After loading the playlist, a list of channels that it contains appears. Save it and click on “update”.

Installation of Simple Smart IPTV

What to do if you have problems setting up your LG TV

If difficulties arise, first of all you need to repeat the settings. Sometimes you have to call a specialist. Equipment repair may be required. During setup and operation, the following problems may occur.

Before setting it up, it is important to select the correct picture parameters

No image

This may be due to an incorrect cable connection from the antenna or set-top box. It is important to check the plug, remove it and reinsert it into the connector. If Internet channels are connected, it is recommended to press the corresponding button on the distribution device and on the TV (if available).

The overall screen setup and format can affect the quality of signal reception

Make sure your LG TV has noise reduction turned off

Wrong mode selection between video inputs also causes image loss. Press the corresponding button on the remote control and make sure that the setting is correct.

Not all TV programs found

If the TV owner is faced with the problem of a lack of channels, then you should contact the service providing the service to clarify the information. Most likely it's a subscription issue. In case you are tuning in to free digital channels, there is most likely a loss of signal. It is important that at this stage the quality of noise and graphics are the same. You can view information about this by pressing the “info” button on the remote control.

If you find channels that are not working, double-check your search settings. Have you checked the box to prohibit encrypted programs?

If you follow the instructions provided and choose the right type of settings, you will be able to tune in the channels without difficulty. When something went wrong or you have additional questions, write them in the comments under the article. We will definitely answer you.

Formation of favorite groups

You can make changes to lists through the “Arrange Favorites” menu.

Most receivers already have pre-installed thematic channel lists, so it may be impossible to move additional programs into them.

To a greater extent this applies to “All TV” or “All Radio”. However, some lists have only names and must be created independently. It is worth noting that even after completion of the work, you can make changes to the management structure and add or remove the necessary TV channels at any time. And now more about how to do this.

Preset lists

Working with them comes down to the fact that it is necessary to add additional TV channels and sort them by content topic

. For example, “Music” implies the placement of music programs on television and radio. To add them you will need:

Moreover, the already formed one can be converted, and the previously selected programs can be swapped again. You can do this as follows:

Own program groups

The settings are not too different from those required for the presets. The only special difference is that the content can be very diverse, and the name must be determined by the user

. So, for example, you can create a selection of “Grandma’s Favorites.”

The same is true for creating any groups.

. Depending on the receiver model, their number may be limited to only four or four dozen such lists. In any case, the possibility of creating a convenient control format remains.

Many Tricolor TV subscribers, while using the receiver, want to customize it for themselves and swap TV channels depending on their own preferences. This makes it easier to select TV channels and makes the process faster and simpler. Previously, there were no problems with moving TV channels, and users could do this using a special sorting option. But over time, everything has become more complicated and programmers still cannot restore the lost function. Therefore, in order to swap channels on the “” receiver, you will have to work hard. All that is required of you is a little time and patience.

The most common sorting is alphabetical.

To do this, press the “OK” button and the green button on the remote control. A window with an alphabetical list will appear on the TV screen on the left. In order to swap channels on the Tricolor receiver, the user must select a specific letter and confirm his choice by pressing the “OK” button. After a second, in the right window you will see TV channels whose names begin with the letter you selected. After completing the work, click on the “Exit” button. It will help you get out of the channel list. Owners of equipment DRE 5000, DRE 5001, DRE 5003, GS 8300 and GS8300M can swap channels on the Tricolor receiver in this way.

1.6 MiB 350 Downloads

How do I organize channels using the Organize Favorites menu?

Date of:

25.05.2016

Problems with replacing channel locations on Tricolor TV receivers

Many users have noticed that after updating the software, they are unable to move " " channels using the " Organize Channels "

» .

In this case, you need to use the “ Arrange Favorites”

» .

Let's look at the example of the GS-9303HD receiver

First, you need to go to
the MAIN MENU >
, from there go to
CHANNEL SETUP >
, then select
ORDER FAVORITES >
and go to
ALL LISTS
.

Select any list. We do not touch ALL TV and ALL RADIO. They are not suitable for swapping channels on the Tricolor receiver. For example, select the MUSIC list and confirm the selection by pressing the OK button.

A list will open in front of you. You need to move ALL CHANNELS to the left list. To do this, use the same OK button. The essence of this manipulation is that TV channels on the left list can be swapped, but those on the right cannot.

After transferring TV channels to the left list, hover over any TV channel that is in it.
( Green button) becomes active
and you can easily move channels on the receiver "".

In order to select the required TV channel, the user needs to
(click on the green button)
and move it using the buttons located in the central part of the remote control.

This way you can place the TV channel at the desired position. When it takes the place you need, (press the green button again)

. She will secure this position.

If desired, in this menu you can create a list of favorites and give it any name at your discretion by pressing
(blue button)
- for example,
MY TV
.
All changes are saved using the same (green button)
.

The list will open. Go to the right column and select ALL CHANNELS.

Using the blue button, we transfer everything at once to the left selected list. You can edit it as you wish. Responsible for movement (green button).

When exiting the MENU, do not forget to save all changes.

Select the list we created “ My TV”

"You can press the "
FAV
" button or the blue "
F4
" button - depending on the remote control model.

NOTE

the fact that when resetting to factory settings, the manipulation will have to be repeated again. The standard list cannot be edited, so creating your own is recommended.

Video review “How to organize the list of channels on the Tricolor TV receiver”

Today I discovered an unpleasant “gift” from NTV+. They mixed up all the channels: they didn’t add or delete, but changed the numbering of all. It turned out that the TV was set to automatically update the list and I got a complete quiche.

Switch to avoid problems

and don't be sad like a cat

In fact, there is a whole mountain of stuff in my channel package, but I only watch a little: NatGeo, Discovery, Science 2.0, History, Euronews. Sometimes, when I feel like chatting, I can switch to RBC. I am very glad that subscribers of this operator have more than 600 channels, but I’m too lazy to scroll through them, especially since I know exactly what I want: one of 5-6 channels. I remembered them by numbers, but now everything is in ruins. On the company forum it is suggested that you can change the channel numbers manually, but no matter how much I looked for this functionality, it was not there (I still had hope of returning to the old order). It turned out that it was necessary to scan the channels manually, in which case the function of editing the number actually becomes available, but the order becomes completely insane. Purely hypothetically, this is a matter of time and patience. However, I don't have the patience to do this with the remote control. Here's a working way:

1. Press and hold SETTINGS
and wait until the menu disappears and information about the channel appears. (now you can let go)
2. When displaying information about the channel, quickly dial 1105 and click OK.
3. Select cloning and transfer the config to a flash drive.
4. Using this program (download here), open the file (which contains the model name).
5. We remake everything as you please.
6. Save
7. We load it into the TV, it turns off.
10. Turn on. We are happy about the list we need. By the way, you can print it out for yourself from the program

Result

And the printout, the numbers have changed, although now it’s easy to scroll through them.