How to remove unnecessary channels on LG TV? - collections of answers to questions

Fight against advertising on Tricolor TV

To turn off advertising, make changes in the receiver settings: Menu - Settings - System settings - Other - Display time and set the parameter to “0” - Save changes - Exit - Turn off the receiver from the network for a few seconds. !

If you can’t remove advertising with some model, write to the Tricolor TV support service or contact an online consultant in your Personal Account on the Tricolor TV website and ask to remove advertising! There are already such applicants, advertising is being removed. It’s easier for them to sort this out with you, because they will still have 10 million unsuspecting subscribers.

Scammers have already responded on the Internet, who, under the guise of Tricolor TV support, offer to remove the advertising screensaver if you enter your cell phone number, here is this scam site “application-to-disable-advertising.rf”

Don't be fooled!

How to Remove Satellite Channels on Lg TV

How to set up digital and satellite channels on LG TVs

How to set up channels on LG TVs without the help of others is one of the frequently asked questions of users. There are various methods for setting up channels on receivers of this brand, this depends on the type of TV (LCD, Smart, LCD, plasma panel), in addition to the correct selection of the studio, what television format the user chooses (Satellite TV, digital TV, cable TV).

Digital TV

There are two ways to set up digital channels on LG TVs. The 1st is suitable for all receivers, the 2nd – for plasma panels with the Smart option.

Method No. 1

Find out the required characteristics for the option on our operator’s website.
Where is the "MENU".
"CHANNELS" tab.
Enable the “CABLE TELEVISION” item; you need to know that new receivers may not have such an item.
Go to the “Manual configuration” tab.
A window will appear where you need to enter the required characteristics.
A search will begin, after which free digital television will become available to the subscriber.

Method No. 2

There is an option to set up digital TV channels on LV smart screens according to the following annotation:

Press the “HOME” button on the remote control.
Go to the “SETTINGS” tab.
Where is "OPTIONS". Here you need to choose a country. If the model was produced later than 2011, then it is necessary to choose RUSSIA; earlier, then experts advise choosing Finland or Germany.
When choosing other countries, do not forget to change the language to “RUSSIAN”; this function is available in the “LANGUAGES” tab.
Go to “SETTINGS” again, give the “AUTO SEARCH” command.
A window will appear where you need to select the “CABLE” signal type. If the window does not appear, it means that the country was selected by mistake; you need to set the appropriate country.
If there is anything left for our client to do if it is done correctly, then give the quick scan command and enter the following data: frequency n - 274,000, frequency k - 770,000, modulation - 256, Id - auto.
After this manipulation, the screen will ask you to enter additional information. To prove it, you need to click on the checkbox: only digital TV – the device will find DTV and analogue channels; Autonomous numbering – numbering will be set independently; skipping encrypted programs - paid ones will not be tuned in;
Start scanning, after 20 minutes what remains to be done for our client, the TV channels will be found.
Setting up digital channels on LG TVs is complete.

Edit channels on LG webOS 3.5 (3.0) TV

How to delete several channels on TV.

Delete several channels on your TV at once.

subscribe to the channel and give it a thumbs up.

These are the main options for setting up digital TV on LG TVs. Also read how to set up Smart TV on equipment of this brand.

How to turn off auto-update

All LG panels have an auto-update feature if it is in connected mode. At times, what remains for our client to do is that the installed channels will be reset, to prevent this from happening, it is recommended to disable this option.

Device menu.
Option item.
Digital cable.
Turn off the function.

Satellite TV

There are also several options for installing satellite television.

Setting up the TV can be done using automatic and manual methods.

Option 1. Automatic search

If the user wants to view only free satellite programs, then under such circumstances LG setup occurs according to the following scheme.

A tuner is connected to the LG screen to receive the signal; it is best to use the HDMI connector. If the screen is already equipped with an integrated receiver, then the connecting cord is connected to the corresponding connector on the panel.
Where is the "MENU".
Item “Channels” - select “Satellite” as the signal source and press the “OK” button on the remote control.
Where is “SATELLITE SETUP”, confirm the desired satellite, then press the “OK” button.
Go to where “Automatic search”, give the command to scan channels.
The installation of satellite channels is completed.

Option 2.4. Automatic search (Pay TV)

You need to purchase a module with an access card from a satellite TV provider (NTV Plus, Tricolor). Register it.
Plug the acquired module into the connector of the receiver, or TV set.
In the “Autosearch” section, select a suitable operator and click the “OK” button.
Other actions are similar to the first option.
After the operation is completed, what remains for our client to do is that the encrypted TV will be unlocked and an image will appear.

Option 3. Manual search

This method is usually used in this case if the satellite characteristics have changed or if the default options are not suitable for the selected connection type.

In the menu, select “Satellite Settings”, here you need to set the necessary characteristics of the transponder and convector (this information was written by the company providing TV services).
Start scanning using new data.

These are the main methods to set up channels on an LG TV. In 90% of cases, the user copes with this task without the help of others. On the contrary, it is impossible to complete the installation without the help of others. We should make sure that the elements are connected correctly, what remains for our client to do is to try and perform the actions one more time, strictly adhering to the instructions.

If repeated actions do not bring results, it is recommended to call a specialist; the equipment may need to be repaired.

mobile66.ru

How to remove an unnecessary channel on Samsung and LG TVs

01.10.2018

Modern providers offer a huge number of TV channels, most of which are never watched and only hinder the viewer from navigating through the playlist. Next we will tell you how to delete a channel on a TV from Samsung or another manufacturer.

How to delete a channel on a Samsung TV

The sequence of actions required to remove unnecessary programs on a Samsung TV depends on the series and model of the device. These characteristics are indicated as a combination of numbers and letters on the back of the TB device or in the complete operating instructions for the device. The series is designated by a Latin letter - the symbol is located in the name of the device after the prefix “UE” and the screen diagonal: for example, the device UE49MU6100U belongs to the “M” series. Having decided on the TV series, the user can begin editing the program playlist.

Series M, Q, LS

To delete channels on a Samsung M, Q or LS series TV, the user will need to:

Open the device settings menu using the “Home” key located on the remote control.
Go to the “Live Broadcast” system section and open the tab with the playlist of television programs.
Select the Change Channels tool using the Right arrow key.
Mark the TV channels that need to be erased from the device’s memory - a check mark should appear to the left of the channel name.
Press the “Delete” softkey and confirm your choice.

To complete the settings and exit the menu, press the “Return” button.

K-series

To remove unnecessary channels on a Samsung K-series TV, you need to:

Go to the “Live TB” section.
Open "Playlist".
Mark unnecessary TV channels with a checkmark (Edit tool).
Click on the blue “Delete” button.

Next, you need to press the “Back” button on the remote control.

J-series

The algorithm for deleting channels on TV J-series is as follows:

Go to “Settings” of the television device. Depending on the model number, you will need to press the “Menu” or “123” key on the remote control.
Open the “Broadcast” section and go to “Playlist Changes”.
Removing “extra” TV channels using the “Remove” button.

Afterwards you will need to press the “Return” key.

H-series

Instructions for deleting TV channels on Samsung N-series devices are presented below:

Launching the settings menu using the “Menu” or “Keypad” key located on the remote control.
Go to the “Broadcast” system subsection.
Adding special checkmarks next to the names of channels that need to be erased from the playlist.
Selecting the “Delete” tool and confirming the operation.

Complete the setting using the “Return” key.

F-series

Deleting TV channels on F-series devices is carried out in the same way as on H-series devices. To log in, you must press the “More” button located on the remote control.

E-series

To erase a TV channel from the memory of an E series device, the user must:

Press the “Smart Hub” button and select “Channels” in the menu that appears.
Mark unnecessary programs with a checkmark and open the “Tools” context menu using the key with the corresponding name located on the remote control.
Click on “Delete” and confirm the operation.

Next, you will need to complete editing the playlist by holding down the “Back” key.

How to delete a TV channel on an LG TV

There is no function for deleting TV programs on LG devices - the user can only hide or move unnecessary programs to the end of the playlist.

To configure you will need:

Press the “Settings” button located on the remote control.
Open Playlist Editor.
Highlight the “extra” program in color, click “OK” and move the TV channel to the desired place in the playlist.

If desired, the user can always return the default channel order settings.

How to restore deleted TV channels

To return deleted programs, the owner of a Samsung TV will need to run the “Auto-Tuning” playlist:

Open system settings and select “TB” as the signal source
Return to the initial menu page and go to the “Broadcast” section.
Select “Auto Configuration” and press the “Start” softkey.
Select “Antenna” (for tuning analogue television) or “Cable” (for digital channels).
Launch “Scan” and wait for the automatic setup to complete.

Restoring deleted programs on TVs from other manufacturers is performed using a similar algorithm.

Conclusion

If the user still has any questions, it is recommended to look for additional information on the manufacturer’s official website or in the complete operating manual for the TV device. Video on the topic

How to remove an unnecessary channel on a Samsung and LG TV Link to main publication

televizore.ru

Blocking individual transmissions

To block a TV channel from children:

Go to the menu, go to the “Broadcast” item.
Click on “Block”.
Click “Enable”.
Next, the path is known - “Change”, select the checkboxes of the item that you want to block, again the “Block” button
The default password is 0000, but in the window that appears you will be prompted to enter any other set of numbers.

When it seems to you that the issue of blocking is no longer relevant, you can easily disable it in the same way - using the remote control.

How to sort alphabetically

If the user watches only free TV channels, or does not want to sort, then it will be convenient for him to simply arrange them alphabetically.

When watching the broadcast, press “OK” on the remote control.
Press "F2".
Select the letter with which sorting will begin and click “OK”.
The result appears on the right.
To save, you must click "OK".

Option two - also known as fine manual tuning

Don't be scared by the title, there's nothing complicated here.

This is not building rockets)

This option is better because you can leave channels that will be more stable. That's why I would recommend it.

So, to begin with, we kill everything that the set-top box caught with auto-search.

This is described in the previous method, only we choose to delete not just one channel, but all of them. After that, go to the “Manual search” menu item, for me this is the first tab and the very bottom line:

We look at the very bottom line

Here we manually set the frequency at which we want to catch our channels, or more precisely, at which they are transmitted in your region. We take the frequency from the official website of the project; in our example, I would enter 546 and then 714 MHz. But in Bryansk the transmission of the first multiplex is on 618 MHz. If nothing is caught, we try to change the range; for me it works at 8 MHz. (this is the line immediately below the frequency)

Enter the desired frequency and set the range to 8 MHz.

After you set the frequency, the set-top box will show you the strength and intensity of the signal.

Choose one of the frequencies at which the signal is higher!

And then we start the search. The set-top box finds the first multiplex, using exactly one channel, and nothing more.

Then, on the same map, look for the nearest tower that transmits to you the second multiplex and also do a manual search. In my example, this is Roslavl.

Nearest tower with a second multiplex

Click on the tower and look at the frequencies at which the signal is transmitted. Important : if you just click on the tower, it will show the frequency of the first multiplex. To view both frequencies, click on “Details”, and on the new page we see both frequencies:

On the “Details” page you can see all the frequencies on which the tower broadcasts

Actually, that's all. This manual search will give you all the channels in a single version.

Uninstalling applications using the mouse

To remove applications, you can use the mouse for convenience. You can use both a wired and non-wired mouse by connecting the adapter - Bluetooth receiver to the USB connector on the back cover or side of the TV.

With the mouse, everything is done in exactly the same way, only instead of the OK button, the left key is used, and instead of the pointers left to right, the mouse is moved from left to right.

If you use a mouse to control your TV, please note that the right button and special mouse buttons do not work. This is stated in the LGY TV user manual

Why is the first multiplex usually duplicated?

By the way, the most attentive reader now understands why the first multiplex is usually “duplicated”. Because the second one has not yet been launched everywhere, and if it’s running at all, that’s already cool. But the first one broadcasts from every iron from every tower.

Modern high-quality digital television has entered our lives - now almost every home has the latest TVs, many of which are equipped. However, smart technology requires certain skills in handling: it can be difficult to understand its settings. Users often ask the question: how to set up channels on a Samsung TV, the most popular brand of the Korean concern.

Digital channels can be set up independently or by a technician from the service center upon first connection. On Samsung TVs of various models, such actions are performed in the same way, and do not take much time: even an inexperienced user will spend no more than 10 minutes on this. Correctly setting the channels on your TV allows you to watch images with excellent quality.

You can set up a Samsung TV automatically or manually - it depends on what generation of TV you have in your home. On modern models, broadcasting is organized using a special tuner; it easily connects to the antenna socket and helps set up digital television (read more about). Thus, devices equipped with the Smart TV function

, are capable of auto-tuning. To do this, follow these step-by-step steps:

select “broadcast” in the menu;
Click on “auto-tuning” twice in the windows that open;
After pressing the start button, select the search mode - full and start the scanning mode.

At this stage, the digital TV setup can be considered complete - now the TV will independently search for available channels and save them in memory.

Attention! If you have lost channels, then you need to adjust the frequencies using a special one, which is activated in the TV menu.

After completing all digital television setup steps, visually check the quality of the transmitted signal. If for some reason the TV channel is not activated, go through all the steps again.

How to delete a channel on an LG TV?

In fact, it all depends on the specific TV model. You can use not deleting programs, but transferring the channel to another. For example, a channel you don’t need is shown on your TV on channel 7, you transfer it to any other channel, and instead, on channel 7, you see what you need. With a little digging into the menu and settings, you will find these functions. There is nothing complicated about this at all; this action is performed within a couple of minutes.
On the remote control, select the Settings button, then Channel Editor, select the desired channel OK, a menu appears with various functions: deleting, moving channels, etc.
If you want to delete channels on LG TVs, you first need to click on the quot;Settingsquot; button.
After that, select the quot;Channelsquot; tab, and then you can delete or sort channels as you want.
But you cannot delete channels on all LG TVs; there are TVs where you can only add a channel to the blacklist.
The settings may be different on different models; sometimes LG’s TV channels cannot be removed from the list at all, but then there is a skip function when scrolling through the channel list. You need to press the LIST button, then the blue button on the remote control, prompts will appear. You can also move channels.
Why delete them? Go to settings and select manual channel search. So, starting from the first, line up the channels you want to watch. And all those you don’t want, let them follow further on the list. In general, you need to organize the channels manually and they will be on those where you quot;plugquot;.
So is there any way to delete channels?
There is no function for deleting channels and this is VERY inconvenient for me as an adjuster. When asked to organize channels on an LG TV or Philips, my blood pressure rises(!

info-4all.ru

Clearing cache

Clearing the cache is another option to solve the problem. You will need the main menu, through which you can enter the browser and its settings. The column called “Cache Clearing” will be displayed separately. Confirm the action and rest for a few minutes, observing the process. If the problem is the cache, after these manipulations you will be able to watch videos as usual.