Instructions for connecting and setting up the Cadena digital set-top box

Comparison of Cadena console models

To date, the company has developed more than 20 models of digital set-top boxes that work with the DVB-T standard and receive a digital signal. Their main difference from each other is the presence of certain connectors through which they are connected to the TV. For example, earlier models can be connected via more wires than new ones.

A list of all consoles is presented in the table below.

What is needed to connect

When purchasing a receiver with a built-in DVB-T2 tuner, you receive the following kit:

• Remote control.
• Battery.
• Instructions.
• Guarantee.

As you can see, the package does not include the necessary cables. You will have to buy an HDMI cable or tulips separately - it depends on the type of input. You must first insert the batteries into the remote control and turn off the mains power to the receiver and TV. You should also initially familiarize yourself with the purpose of the keys on the remote control; in the future you will make settings using it. Below is an image with a detailed description of all the buttons.

Connection diagram to a TV using the example of Cadena CDT-100 and 1711SB

For clarity, we specifically took the 2 most popular models of Cadena set-top boxes and will try to understand the procedure for connecting them to any TV.

First, we need a general connection diagram for a digital set-top box for receiving over-the-air broadcasts through a conventional external or indoor antenna. As you can see, the antenna cable output must always pass through the set-top box.

The point here is that the digital signal is transmitted in encrypted form. To put it simply, it’s just a set of ones and zeros. To decrypt it and provide it to the user, a decryptor is needed. In modern TV models it is already built-in. However, in older ones you have to pass this signal through additional converters, which are set-top boxes.

Connecting models like Cadena CDT-100

As a first example, let's take the CDT-100 . This set-top box has only 1 output through which it can be connected to a TV. This is HDMI. This is an interface that allows you to view images in high definition.

If your TV has one, you will need to purchase a wire from the store to connect the set-top box via this interface. Its cost is not high and starts from 100 rubles. It's better to pay a little more so that the cable lasts longer.

However, not all TVs that do not have the ability to independently receive digital numbers have an HDMI input. Usually this is RSA or SCART. If this is your case, then for a Cadena set-top box with connectors like the CDT-100, you can purchase a signal converter for RSA.

In our stores, this can cost a decent amount, around 700-1200 rubles. Here you will have to think several times whether it is worth it.

Connection options for 1711SB

Cadena set-top boxes of this type are more preferable, because they can be connected to almost any TV. At least you will have at least 3 options that can configure digital broadcasting 90% of the time.

1. HDMI. If the TV is capable of directly (without a converter) receiving a signal via hdmi, you should choose it first, as it provides the best image.
2. RSA. Tulips should be connected by color. In this case, 2 colored wires will be responsible for the sound, and 3 for displaying the image on the screen.
3. SCART. It occurs very rarely and in quite old TV models. If this input is available, you must additionally purchase a special adapter with RSA cables.

Search 20 digital channels on the Cadena set-top box

To check that the Cadena set-top box is connected correctly, you need to switch to the display mode on the TV through which the connection took place. Depending on the manufacturer, the choice of source may be done differently. Typically in practice the situation is as follows:

• Select HDMI if you connected the set-top box via this cable.
• AV. In case of using RSA.
• SCART. Again, if one was used.

After this, you can turn on the power of the console. When you turn it on for the first time, the auto-tuning window should open. Usually it is enough to find all 20 digital channels. To carry out the operation you need:

1. Set the initial menu language and country.
2. Specify “Open” in the channel type.
3. Click on the “Search for channels” button.

After the set-top box scans the entire frequency range, all found TV channels will be saved. The menu will exit automatically.

Manual search on the Cadena console

If the TV tower is located at a considerable distance from you, then a situation may arise when you have to configure the digital number manually, according to the data you have on the channel number and frequency. In this case, you will need to do the following:

1. Find out the exact frequency of digital broadcasting in your region. To do this, you will need an interactive CETV map.
2. After that, you can go to the device menu. Here we are interested in the channel search section. We select manual search in it.

3. In the menu that appears, you need to select the reception frequency you need. You just need to indicate the channel number that you received in the first step. After specifying this parameter, non-zero marks should appear in the signal level and quality column.

During the manual search, the set-top box will only pass through the frequency band you specified and scan the digital channels available on it.

Basic Operations

Basic operations can be divided into the following categories:

• Program manager, including editor, TV guide, channel type.
• Image settings.
• Search for channels.
• Time parameters.
• Language settings.
• System.

Let's consider each point separately.

Program Manager

If necessary, use the built-in channel editor. To go to this section you will need to enter your PIN code – 000000. Then you can:

1. Move the TV channel by pressing the red key.
2. To skip a TV show, click on the green button.
3. For blocking - yellow.
4. To delete a specific channel – blue.
5. To add a TV broadcast to your favorites list, press the corresponding “FAVORITE” button and use it to move it to the desired folder.
6. To rename a channel, click on.

The settings will be saved automatically after pressing the “EXIT” key on the remote control.

If you have any questions or complaints, please let us know

Ask a Question

The next point is sorting. The manufacturer allows you to sort TV programs using a special function. The sorting itself depends on the selected option:

• By LCN - by serial number.
• ONID – by name.
• Service Name – by service name.
• Service ID – by ID.

Next is the “Channel Type” section. In this tab, the user sets the display of television programs. You can set the option to “Everyone” or “Public”. The first option will show the full list of what the receiver found. When you select the second option, you will see a list of TV broadcasts that are not subject to the broadcaster's restrictions.

How to connect and configure digital channels on the World Vision set-top box

Image Settings

In the image parameters, you can change the format, choosing the optimal one for the characteristics of the TV - PAL or NTSC. In the permissions tab, select one of the options you want:

• 576i.
• 576 rub.
• 720 rub.
• 1080
• 1080r.

Please note that all points except the first require an HDMI connection.

Search channels

The next setup step is to search for channels. Usually the system does this on its own; the user can select auto search. But, you can also perform the procedure manually using and. When all channels are detected, they will be added to the general list.

Setting the time

During setup, use the same navigation buttons - and “OK”. Finally, press “EXIT” on the remote:

1. Enter the time zone that is relevant for your region of residence.
2. Next, you can set a timer to automatically turn off the TV. For example, you can set a specific time when the receiver will work.
3. In the time settings, select automatic mode or change the indicator manually.
4. Sleep mode will allow you to put the device on standby. In this case, you can set a specific time when the standby mode will be activated.

Setting options

There is no need to configure built-in options in the tuner. You can use all the built-in functions, including the TV Guide and other useful sections, without additional manipulations.

System Settings

The following options are available in the “System” tab:

• Age restrictions. The login password is six zeros. Select a digital channel and limit viewing access by age ranging from 4 to 18 years. When you turn on this broadcast, a warning message “Age Level” will appear on the screen.
• Change the default six-zero password to your own. Please note that if you forget the PIN code, many functions on the tuner will be blocked in the future. The password cannot be recovered.
• If serious errors occur that cause the device to stop working, you can reset the settings to factory settings. Just enter your PIN and confirm the procedure.
• The “Information” tab will allow you to familiarize yourself with the version of the receiver’s operating system.

ISP blocking service error code 202 on Samsung TV: reasons, what to do?

In the same tab you can update the software.

Possible malfunctions of the Kadena console

No one is immune from troubles. However, for a number of possible problems with the operation of the set-top box, there are already several solutions available. We will provide some of the most popular errors.

The set-top box is not searching/Too few channels/No signal

1. Look for a problem in the antenna. Perhaps it is selected incorrectly or one of the wires has come loose.
2. Try to manually search for channels using the broadcast frequency specified for your region.

Forgot password

In order to reset all settings to factory settings, including the password, you need to search for all channels again. Just run auto-tuning.

There is sound, but no picture / Vice versa

1. Check that the correct display source is selected on your TV.
2. Carefully examine the cable connecting the set-top box. If it is RSA, then you need to look for the problem in the plugs responsible for sound (R and L) or image (Video).

The set-top box turns off/reboots on its own

Check the device's power cord. If it is working, then reset the set-top box to factory settings or restart the auto-tuning of channels.

Review of popular Kadena models

The most popular are the Cadena CDT-100, CDT-1711SB and CDT-1793 consoles. Let's take a closer look at them.

Cadena CDT-100

The set-top box is designed to receive and convert signals from free digital TV DVB-T2 and does not support other standards. It is designed based on the ALI3821P processor (600 MHz) from ALi Corporation, which guarantees high quality signal processing and a clear picture. The set includes an infrared remote control with a standard button arrangement and batteries for it.

The design of the CDT-100 is as simple as possible. The receiver is small in size and fits in the palm of your hand, it has an external power supply, and does not have a display. There are ventilation holes on the top of the case, a power indicator and a USB input on the front panel, a power connector, HDMI and TRRS outputs, and antenna jacks on the back.

The set-top box is equipped with the following options: TV guide, standby mode, auto-off by timer, delayed viewing and scheduled viewing, and recording TV shows. It is possible to adjust the format (aspect ratio) of the image, customize the channel list, record from one TV channel while watching another. The USB port allows you to update the firmware, record video materials to a removable drive, and play files from a flash drive on the screen.

The minimum cost of the CDT-100 receiver is 900 rubles.

Cadena CDT-1711SB

To create this set-top box, the MSD7T01 processor from Mstar was used. The model is designed to receive free over-the-air channels, but the processor can be flashed to gain access to Internet television. The remote control is traditionally infrared, but with a non-standard arrangement: the digital buttons are located under the joystick. Remote control range – 5 m.

The case is small (14 cm wide), on the front panel of the receiver there is a display and two buttons for switching channels, a USB port and a status indicator, on the rear there are antenna jacks, HDMI and RCA outputs. The power supply is built into the case.

Automatic and manual settings are possible, as well as recording TV shows onto a flash drive. Delayed viewing and a weekly TV guide with schedule and annotations are available. The list of channels can be edited: hide uninteresting ones, make a list of favorites. The multimedia interface supports watching videos, including Full HD, allows you to listen to music and view images.

You can buy Cadena CDT-1711SB for 1,080 rubles. or more expensive.

Reviews

Currently, Cadena products are in demand. The company additionally produces various cable and broadcast equipment. Digital set-top boxes have not yet become so popular, with the exception of some models.

For example, many praise the simplicity and reliability of the CDT-100. This attachment is made as simple as possible and setting it up will not be difficult. In addition, those who have already used it claim that it can work around the clock.

In the future, the company's digital set-top boxes will only develop. Judging by the reviews, buyers will sooner or later appreciate all the advantages of these devices over similar ones already available in our markets.