How to set up a Vivanco universal remote control for your TV

In case of loss or breakdown of the remote control, the Vivanco multifunctional remote control comes to support, one that is suitable for virtually any device. For the universal remote control to work correctly, you only need to configure the device properly.

You will need

– suitable batteries;
– user’s superiors.

Instructions

1. Select model1 of the device to be controlled and read the instruction manual. On the last pages of the management there are codes for different manufacturers of the controlled device: stereo system, TV, etc. Find the codes (as usual there are three of them) for the unit.

2. Insert two mini AAA Alkaline batteries into the remote control battery compartment, observing the correct polarity. Press the POWER key to test the functionality of the remote control. If everything is OK, the key indicator will flash.

3. Enter the detected code on the remote control if the device is on the list. Press the SET and TV keys on the remote control (or DVD, depending on the class of the device). Enter the code again after the indicator on the POWER key lights up. If the device does not work, repeat the operations with a different code, one that may be suitable for this device.

4. If the device is not in the list of codes, or the remote control does not control the device, perform a mechanical search for the code. Turn on the controlled device (say, a TV) so that one of the programs works. On the remote control, press the SET and TV keys simultaneously.

5. Hold for about five seconds until the POWER key indicator begins to flash intermittently. Point the remote control at the device. If the device reacts, press any key except the SET key. If you were unable to react in a timely manner to turn off the device, repeat the mechanical search.

6. Perform a manual search if the remote control does not control the device. Turn on the controlled device and quickly press the TV and SET keys simultaneously for a short time (1-3 seconds). After the POWER key indicator lights up, briefly press the POWER key every second until the controlled device responds to the remote control. Press the TV or SET key to complete the search.

There are two methods for setting up your Philips universal remote to control your TV, DVD player, VCR or digital cable box - manually and mechanically. Follow the instructions for manual setup first. If the remote control still fails to control the device, follow the steps for mechanical adjustment.

Instructions

1. Turn on the TV on channel 1. If the device is a DVD player, recorder or VCR, insert a disc or video cassette.

2. Press and hold the Code Search button on the remote until the red light is on. Release the button.

3. Press and release the desired mode button on the remote control for the device you want to control (TV, DVD or cable TV). The red indicator blinks at first, then remains on.

4. Find the manufacturer of the TV or device you want to control in the list of device codes that came with your remote control. Enter the code on the remote control keypad . The scarlet indicator turns off if the code is correct. The red indicator flashes if the code is invalid.

5. Press the Channel Up button on the remote control. If the device responds, no additional programming is required. Press the Play button to test the remote control when setting up a DVD player or VCR.

6. Enable mechanical code search if the device does not respond after manual entry. To do this, press and hold the Code Search button on the remote control until the red indicator remains lit, then release the button.

7. Press and quickly release the button for the desired mode (TV, DVD, cable TV). The red indicator flashes once.

8. Press the Channel Up button several times until the device responds. The red indicator flashes every time the button is pressed. Press the Channel Down button to return if you accidentally missed a code. Use the Play button for DVDs or other devices that do not have channels.

9. Press and release the Mute button to set the code.

Universal remote controls a wonderful invention that allows you to get rid of multiple remote controls on your coffee table. They can fit every electronic item you have in your home. In order for the device to control the operation of a TV, air conditioner, DVD player, etc., you need to configure it.

You will need

– multifunctional remote control;
– instructions.

Instructions

1. Remove the battery compartment cover, observing the correct polarity, and insert the batteries into the remote control. Traditionally, two of them are required, they must belong to the AAA type. Connect to the power supply the home appliances that you want to configure the multifunction remote control to control.

2. Open the instructions for the universal remote control and find information about which manufacturers' equipment this device is suitable for. For the English version this will be the Brand section. The whole company has its own code, mark the combinations that you need. Decide how you will configure the remote control - with support for mechanical code search, or manually.

3. To manually configure your multifunction remote, turn on the device you want to program it to control. Press the SET button and the button that corresponds to the required equipment at the same time - TV, DVD, AUX and so on. After the LED indicator on the remote control button panel lights up, find the three-digit code corresponding to the brand, enter the numbers in order. If the setup is completed and the algorithm of actions was followed exactly, the indicator will go out.

4. Perform mechanical adjustment of the remote control. First, turn on the device - stereo system, microwave, and so on. In this case, each of the channels should work on the TV, and you need to insert a disc into the DVD player and stereo system. Point the multifunction remote control at the required piece of equipment by pressing the SET button and hold it for a while. Simultaneously press the button under which the device is listed. As soon as the backlight of the POWER key lights up, the remote control setup is complete.

Note! Ideally, setting up a universal remote control should be done by a service technician. But if you really speak a little English, you can program the remote control independently by reading the instructions and following the sequence of actions.

The advent of TV remotes has made life easier. However, every time this useful little thing stops working, your health deteriorates significantly. There are several possible reasons for device failure.

Just replace the batteries

If the remote control transmits a signal every once in a while, switches off periodically and generally behaves very unstable, most likely its batteries are easily discharged. All you have to do is change them, and this useful tool will begin to work normally again. If you have changed the batteries recently, carry out this procedure anyway. Occasionally you come across defective batteries that do not hold a charge for long. Another reason for unstable operation (or complete breakdown) of the remote control is the failure of the transmitter on the remote control itself or the infrared signal sensor on the TV. More often than not, the remote control transmitter breaks down, rather than the TV receiving sensor. In order to check the functionality of the remote control, just walk to any hardware store or visit friends who have the same model of TV. If the remote control is not viable, you can send it in for repair or purchase a new one.

In nine out of ten cases, it's the remote control

Sometimes problems in the operation of the remote control are explained by changes in the frequency sends, as a result, the remote control gives signs of life, blinks the lamps, but the TV does not react to it in any way. Moreover, the remote control can control other equipment (if, of course, it is universal). In such a situation, it may seem that the breakdown occurred in the TV, and not in the remote device. This is unlikely, because remote controls fail much (hundreds of times) more often than televisions. So, if similar symptoms occur, the remote control should be given to an experienced expert, one who can diagnose the causes of the breakdown and eliminate it. Occasionally, the TV may simply stop responding to the remote control, while the indicator lamp may respond to button presses, but no action occurs. In this case, you can turn off and turn on the TV; if this does not help, then update the TV software to the latest versions. On any current phone you can install an application that transforms your phone into a remote control for a TV, stereo system and other equipment. You usually have to tinker with the settings for some time, but as a result, you can get a remote control that is always with you and one that you can finally make a call. In most cases, repairing a remote control is more expensive than buying a new universal or specialized one.

As usual, if the control panel is lost or broken, it is impossible to turn on the air conditioner. It is not always possible to purchase the latest remote control for a certain air conditioner model. Therefore, purchasing a universal remote control is an exceptional solution. With the support of such a remote control, you can control any air conditioner. To do this, you need to configure the remote control for your air conditioner model.

The principle of setting up all remote controls is identical and consists of entering the required code into the remote control’s memory. As usual, the remote control comes with instructions, which contain a table of codes for various air conditioner models. There are two modes for setting up the remote control - mechanical and manual mode.

You can use the automatic mode if you do not know what air conditioner you have or your air conditioner model is not in the code table. To configure in auto search mode, you need to take the remote control in your hand and point it at the air conditioner. Find the “SELECT” button on the remote control, press and hold it for 5 seconds, then release.

The remote control will mechanically send commands to the air conditioner and go through all the available codes. In this case, the codes on the remote control display will flash and change. Once a positive code occurs, you will hear a beep from your unit and the air conditioner will turn on. At this moment, you need to press any button on the remote control, the process of scanning codes will be stopped.

Check the operation of the air conditioner with this code. If the commands are not executed correctly or some functions do not work, run the auto code search again until you find the code under which your air conditioner will work positively.

Manual setup takes less time. Find the code in the code table for your air conditioner model, there may be several of them. Press the “SELECT” button, and the code on the remote control display should blink once. Using the number buttons, enter the code into the remote control memory and press the “ENTER” button, the remote control is programmed.

Check how the air conditioner executes commands. If the air conditioner is not working properly, try entering the other codes one by one. You can also cycle through codes using the “TEMP+” and “TEMP-” buttons.

After entering the positive code, the air conditioner control panel is ready for operation. All basic functions will be available to you. From the remote control you will be able to select the operating mode of the air conditioner - cold, heat, ventilation, mechanical mode. You can set the desired temperature, adjust the fan speed and prefer the direction of air flow.

Video on the topic

Helpful advice If your device brand is not on the page with codes, try not only a mechanical or manual search, but also codes from other device brands.

Equipment manufacturers try to provide each of their devices with a remote control so that the user can conveniently use their products. You don’t need to get up to turn off the lights, adjust the air conditioner, fan, or turn on/off the TV; you can do everything while sitting on the couch. This is, of course, convenient, but over time, coffee tables become cluttered with different remote controls, which creates a certain amount of confusion and irritation.

If you don’t yet know that there is a universal remote control that can be configured to control several devices at once, then in this article we will tell you about all its capabilities and provide instructions on how to use it and how to configure it correctly.

TOP applications on your phone

To simplify the choice, let's look at several applications that can replace the console remote control. All of them have positive reviews from users.

CatusPlay

The CatusPlay application is a universal program designed for phones with iOS and Android. With its help, the application is available remotely on many devices with Android TV Box and Fire TV. The software is suitable for devices such as MXQ, MX Pro, H96 Pro, M8S Box and others.

pros

Minuses

For full control, you must have a phone and a mouse at hand;
Double swipe does not work on some devices;
It is not always possible to connect the first time.;

MAG 250 Remote control

If you have a MAG series device at hand, use the MAG 250 remote control application for TV set-top box on your smartphone. Its peculiarity is that it supports the following models in this series - MAG 245, 250, 254, 255, 256, 257, 322, 323 and others. In the absence of an infrared port, the online remote control allows you to work using WiFi. The program is only available for Android phones.

pros

quick setup;
relatively little advertising;
an excellent alternative to a conventional remote control;
the ability to control the TV if the phone has an IR port;

Minuses

inconvenient access to the electronic keyboard (users do not immediately find its location);
limited functionality of the free version;
does not work in the “BIOS” of the set-top box;
sometimes banners cover the working part.;

Separately, you can download the remote control for the digital television set-top box for iPhone. The only difference here is the name - MAGic Remote. The program allows you to control MAG series consoles online from an iPhone or iPad. Otherwise, the software has the same functionality as the Android analogue discussed above.

Mi Remote

Many users prefer Mi Remote - a universal TV set-top box remote control program for online control via phone. Unlike a number of other applications, here you can control other devices - air conditioning, DVD player, projector, TV and other information. Supported brands: Sharp, Panasonic, Sony, Samsung, Micromax and others. The program is only available for Android devices.

pros

large list of supported equipment;
quick setup;
regular release of updates;
Wide range of supported manufacturers.;

Minuses

some users experience connection difficulties;
Not supported on all smartphones;
there is no automatic detection of the device brand;

Remote control for Eltex media centers

If you lose your main remote control from Eltex, you can install the remote control application for a digital set-top box on your phone and control the equipment online. To solve this problem, it is necessary that the TV set-top box and smartphone be on the same network. The software is released only for mobile devices with the Android operating system.

pros

support for almost the entire line of Eltex media centers;
touchpad function;
stable operation on all supported devices;
regular firmware updates;

Minuses

sometimes does not play videos from YouTube;
control is available only via WiFi;
Only one brand of equipment is supported;

IPTV SML-482 Remote

As an option, you can use the online remote control for the IPTV SML-482 set-top box with control via a smartphone. For normal operation, you must have an IR port on the device. The list of supported IPTV providers includes MGTS, Rostelecom, Optima Telecom, Bazeport and others.

pros

simple and quick setup for online work;
the application quickly identifies the TV and set-top box;
Possibility of use as an alternative to a conventional remote control;

Minuses

the free version has a lot of advertising;
not all brands of TVs and set-top boxes are supported;
There is no widget for the desktop, which creates a number of difficulties when searching.;

Let us immediately note that there are not many applications for universal remote controls on the phone for TV set-top boxes. Most often they work with specific device models, which creates difficulties during the search.

What is a universal remote control

If you have become a happy user of digital television, then a new device with a remote control has appeared in your apartment - a set-top box-receiver. And in order not to add another remote control to your everyday life, let's figure out how to use a universal remote control.

Despite all the breakthroughs in technology, remote control devices have not changed at all. They may have different shapes, but the design of any remote control still consists of a housing, an electronic circuit, buttons, LEDs, and an autonomous power supply.

The universal remote control has an identical internal structure, only it can be configured to control several devices at once. For example, having purchased such a device, you can put the television, set-top box and multimedia remote control in the closet, and register all their functions in a universal remote control.

Can any remote control be universal? No. Although they are similar in appearance, their internal electronic circuitry is different. Only devices designed for this purpose can be configured to control multiple devices.

Possible problems and their solutions

Given the ease of control of the receiver, configuration difficulties are practically eliminated. But sometimes it turns out to be impossible to avoid troubles, such as a black screen. In such cases, it is necessary to understand the reasons for what happened and correct the situation. A service call is usually not required.

Denn box does not find channels

If the set-top box does not search for channels, you should:

check the correctness and reliability of the cable fastening;
correct antenna position;
cable integrity.

When manually searching for TV channels, you need to make sure that the frequencies entered are correct.

Also, sometimes difficulties arise due to errors in the basic settings, for example, an incorrectly specified country.

Does not respond to the remote control or the button does not work

In case of difficulties with the remote control, you should:

change batteries;
make sure that there are no obstacles between the receiver and the remote control, and that the receiver itself is not blocked.

Typically, it is these problems that interfere with switching programs and controlling the set-top box.

No signal

In addition to the already mentioned reasons for problems, technical work of the broadcaster leads to the lack of a signal. To make sure that the problem is on the broadcaster’s side, you need to turn on another channel. If at least one works, then you need to wait for the completion of preventive work or re-search if you know for sure that the problem is not preventative.

The difference between the original and universal remote control

A TV remote control, for example, a Tricolor TV, is a useless device in itself; it can only be used in conjunction with another device - a television receiver, for which it was created.

The operating principle of the remote control is based on three actions:

When you press a button on a device, you mechanically activate a microcircuit that creates a specific sequence of electrical impulses;
The LED element of the remote control converts the received command into infrared radiation with a wavelength of 0.75-1.4 microns, and sends the signal to the associated device;
The TV has a phototransistor that detects this IR signal and converts it into its own electrical impulse, transmits it to its control unit, due to which the command you have given is executed.

The communication method used in remote controls is called PCM, or Pulse Code Modulation. Its peculiarity is that each command is assigned a separate 3-bit sequence, for example:

000 – turn off the TV; 001 – select the next channel; 010 – return the previous channel; 011 – increase volume; 100 – reduce volume; 111 – turn on the TV, etc.

That is, when you press a button on the remote control, the electronic circuit turns on the IR LED in accordance with a given pattern: “111” - ON, ON, ON, with a clear signal step length, for example, 3 milliseconds. If you selected the volume button, which has code 011, then the LED will perform three such actions with a predetermined delay: turn off, turn on, and turn on again.

There are three different types of remote controls on the market:

Original;
Unoriginal;
Universal.

Original and non-original remote controls are control devices created for one specific model of technical devices. The only difference is that the first type is produced by the native manufacturing plant where the TV itself was assembled, while non-original remote controls are produced by different companies under license.

Universal remote controls (UPDU) are learnable control devices that:

Can be customized;
Suitable for many TV models;
Can be used instead of a lost remote control for any technical device.

A universal remote control can be chosen by shape, size, color, design, depending on personal preferences. Inside such a device there is a special program and a special code base that allow you to determine signals from almost any TV.

The most common brands of universal remote controls are Supra, Huayu and Beeline.

Universal remote control for all GAL TVs: how to synchronize with TV

In fact, the manual method of connecting the remote control unit is considered the most reliable and practical. Despite a few long steps, you end up with a fully functional TV and all its options. Let's start setting up:

All remote controls come with instructions and a set of codes. If for some reason you do not have such documents, then use the table of codes for popular TVs above in the article.
Press the TV key and hold it until the indicator light comes on (all universal remote controls have it). Usually this takes 3-5 seconds.
Then you need to enter the appropriate code for your TV model. It is quite possible that you won’t be able to guess it right the first time. Only when the indicator goes out can we assume that the settings have been made correctly.

HELPFUL INFORMATION!

Be sure to check the remote control after all setup steps to ensure that all TV options are working. If some of the buttons do not work, then the accessory needs to be reconfigured, therefore, look for a different combination of numbers.

Step by step guide on how to set up your Huayu universal remote

Huayu brand UPDU is one of the popular accessories that people use when they lose the original device. In this case, before setting up the control device, you need to go through three steps:

Using the combination we find, we fix the connection between the remote control and the TV. To do this, enter the code from the instructions for the model, after holding down the SET key. The volume indicator should appear on the TV receiver screen. After this, you can release the SET button.
Check how the buttons on the device work, if everything is correct. Save the code. To do this, press the SET and OK buttons simultaneously.
If the remote control is not functioning correctly, try selecting the code again.

You can determine the combination number by the indication on the control device itself. To do this, you need to press and hold the INFO and SET buttons at the same time. After which the indicator signal will help determine the required numbers by flashing.

Setting up the Beeline remote control

Standard Beeline remote controls belong to special set-top boxes and consoles, however, there are models that can be designed to remotely control any TV. To set up such a device, you must correctly follow all the points from our instructions:

To configure the control correctly, your TV receiver must be turned on. On the remote control you need to press the TV key.
Next, find the OK button on the remote control (usually in the center of the remote control) and hold it until the device finds the required connection code. He will notify you of this by turning off the TV.
After this, release the OK button and check the functionality of the device. After which you can use the TV and watch channels.

Automatic setup is considered one of the simplest manipulations for synchronizing universal remote controls with a TV. However, mechanical adjustment can be used if the first method fails to connect the remote control device.

How to find out the TV code

To set up a universal remote control for your TV, it is advisable to know the three- or four-digit code of a specific model. You can find such codes either in the technical data sheet of the TV, or on the website of the equipment manufacturer, or in special reference tables. It’s called “Code for setting up the remote control.”

But how to set up the remote control for your TV if you couldn’t find the right model code for your model? For this purpose, each UPDU has an automatic configuration function with software code search. Simply press the desired combination of numbers, after which the auto-selection command will start.

How to set up the Vivanco UR2 universal remote control according to the instructions?

There are always household appliances in the house, and, as you know, you can control them remotely and stationarily. Many buyers are increasingly wondering how to configure the Vivanco UR 2 universal remote control in order to simultaneously regulate the operation of all household consumers. The Vivanco UR 2 TV remote control is a real lifesaver, since this device ensures correct operation with household appliances, has a long service life and high technical characteristics. It is enough to make the investment once, but then there will be no more problems with controlling the same TV. However, it is not enough to buy a remote control; it is very important to configure it correctly and program it. In this case, it is best to use the valuable tips from the instructions or use the unlimited possibilities of the World Wide Web to help.

The first method of setting up a universal remote control is extremely simple, since it can be done manually, without using the latest technologies and achievements of scientific and technological progress. To do this, you need to carefully study the instructions, especially its last pages, where tables with codes are given. Such codes relate to different models of household appliances, so you need to find the required combination and enter it into the memory of the universal device. This can be not only the brand of the TV, but also a music center or video player. In this case, you need to find out in advance which devices can be controlled using a universal remote control and in what quantity. If you carefully study the instructions, no questions arise, and the process of setting up a universal remote control takes only a few minutes of free time.

So, after purchasing a universal remote control, you need to insert the batteries, after which the key indicators should flash, thereby demonstrating that the universal remote control is ready for further configuration. Enter the code selected in the table, which corresponds to the TV brand, into the free field, then press the SET and TV key. Then re-dial the specified combination of numbers, but first make sure that the POWER key lights up. If this does not happen, you need to re-enter the code - it is possible that an error was made when entering or there is a mismatch between the code and the TV model. This once again proves that special care is required when making settings. If manual settings do not make the universal remote control functional, it is recommended to use automatic settings, which are also available to everyone interested.

If you have already purchased a Vivanco UR 2 universal remote control, the instructions are the first thing you need to read carefully. If you enter settings in automatic mode, this requires simultaneously pressing and holding two SET and TV buttons for several minutes. Ideally, the POWER button indicator should light up and flash. It is very important that the TV is working at this moment, and the universal control panel is pointed in its direction. If the indicator does not blink, you need to turn off and turn on the TV, then repeat the necessary manipulation. Afterwards, an automatic search begins, which will stop when the remote control begins to respond to a specific TV model. If such simple manipulations are difficult for the user to understand, you can additionally use the help of a qualified technician, but in this case you will have to overpay somewhat for the service provided.

Smartphones with universal remote control function

Did you know that the latest models of some smartphones already have a universal remote control function? You don’t have to buy another remote control, but simply set up your phone to control all the devices in your apartment, but only those that have the SMART option.

To set up a universal remote control on your smartphone, you will have to visit the Play Store and download the mobile application. There are many of them, so read the reviews and install the one that suits you best.

After starting the program, you will be offered a list of equipment (set-top box, media streamer, TV, player, smart home, etc.). Choose what you want to control. Next you will need to indicate the manufacturer and pairing method (Wi-Fi, Bluetooth, infrared).

The program will start searching for equipment, and as soon as you see the name of your equipment on the phone screen, select it. A special confirmation code will appear on the TV display, which you will have to enter into the program on your smartphone. Now you have in your hands not just a phone, but also a control panel.

This installation is extremely simple and straightforward. All instructions appear sequentially on the phone, and all you have to do is confirm your actions. For such a setup, you do not need to know the code and automatic search is also not required. Remote communication is established using the selected wireless communication technology with specific devices in your apartment.

Having a single control panel for all equipment in the house is very convenient. And as you understand from our article, setting up a universal remote control is quite simple and quick.

A universal TV remote control may be needed for various reasons.

For example, to control multiple screens or due to a breakdown of a proprietary device.

In this article, we will briefly and simply explain how to set up a universal remote control and where to find codes for your TV.

Functions and modes

The air conditioner remote control performs a number of important operations that simplify the use of the split system, and often completely ensure its functionality. We list the main functions of the control panel:

Enabling and setting the main operating modes: air cooling, heating, ventilation, dehumidification.
Activation of additional modes and functions - timer, cleaning, etc.
Setting the desired temperature indicators.
Setting the fan speed.
Adjusting the direction of air flow by changing the position of the blinds.

On/Off or Power – turns the air conditioner on and off.
Mode – automatic mode control.
Swing and Air Direction - sets the air flow vertically.
Fan – setting the fan speed (pressing the button increases the rotation of the blades).
Timer - setting the activation and deactivation time of the device.
Sleep – “sleep” function reduces the noise level and cooler power.
Clean Air - ionization mode of incoming air.
Turbo or Full Power – start at maximum power.
Set or Ok – confirmation of the command selection.
Reset – reboot, reset settings.
Lock – key lock.

Often, some of the main functions on the panel are displayed in the form of conventional images - icons. They are quite easy to understand: for example, the key with the “sun” icon is responsible for heating, and the “snowflakes” icon is responsible for cooling.

Some models of split systems have additional functions, which have their own symbols on the remote control. The Clean key is responsible for cleaning and drying the indoor unit after use. Led and Lighting buttons are found in air conditioners with a display - they turn on the backlight.

In this material we have collected generally accepted instructions for using remote control devices for split systems. We found that understanding its operation is quite simple - all the keys have clear symbols, so setup can be done intuitively. Adjustment of temperature and other parameters is carried out by pressing the function key again. However, before purchasing and using the remote control, it is always recommended to read the instructions for the specific model to avoid incorrect settings of the device.

What is a universal remote control

It sounds complicated, but in fact, it is a simple device that creates signal pulses suitable for most TVs and set-top boxes.

Huayu, Gal, DEXP, Supra are considered popular and high-quality manufacturers of UE.

To set them up, special codes are used, which differ depending on the brand of TV, and you can view them on this page.

The universal model will fit a large number of common and popular manufacturing companies, for example, Samsung, LG or Philips.

Differences from a regular remote control

The original remote control and the universal one have two significant differences, which significantly increase the cost of the first - this is its “branding” and quality.

A remote control made by the owner-manufacturer is undoubtedly of higher quality than a Chinese one. However, if the TV is already 5-6 years old, then you will not be able to find a branded remote control for such an old model.

How to find out the TV code?

The code is necessary to be able to connect third-party devices with it. These include remote controls, smartphones or tablets.

It ensures device recognition and correct operation. Consists of a unique set of numbers that can be found in this file, as well as in the TV itself. To do this you will need:

login to YouTube;
open settings;
select the option to connect to your phone;
after entering the “Connect manually” section, a blue code will appear;
remember it or write it down.

How to set up a universal remote control

Each device comes with instructions that describe the setup process in detail. We will look at setting up models from popular manufacturers.

Huayu

To configure it you will need:

turn on the TV, point the control unit at it and simultaneously hold down the power and “Set” buttons;
Watch the indicator carefully, it should be on all the time;
use the volume control to set commands;
To exit pairing mode, press the “Set” button.

Automatic adjustment:

turn on the TV, point the remote control at it;
hold down the button indicating the device type;
after the indicator lights up, release it;
press the power button on the UE, this will start an automatic code search;
As soon as the TV turns off, you must quickly press “OK”, this will save the code in memory.

Sometimes the automatic search does not work well, so you need to configure it manually.

Manual adjustment:

after turning on the TV and pressing the “TV” button, the indicator will light up;
releasing it, enter the device code;
after entering the fourth digit, the code will be saved in the device’s memory and the screen will go dark.

Auto-tuning occurs according to the following algorithm:

turn on the TV, point the CP at it, press the button indicating the brand of TV;
hold down the “Set” button and hold until the indicator lights up;
click on channel selection, automatic code selection will begin;
Once the indicator goes off, immediately press the “OK” button to save the found code.

If the button is pressed too late, you will have to do everything again.

The advantage is that by searching through channels, you can regulate in which direction the search will be carried out.

Manual code entry must begin after pressing the “Set” button and the indicator lights up. Enter the numbers you found and click OK. The remote control will remember the specified combination.

Supra

Automatic configuration algorithm:

turn on the TV, point the remote control at it and hold the “Power” button, release after the indicator lights up;
If setup is successful, a volume control bar will appear on the screen
Turn off the device using the Power button.

Manual remote control setting:

find the code for your device in the previously mentioned article;
turn on the TV, point the CP at it, hold down the “Power” button without releasing it, enter the found code;
Only after the indicator blinks twice, release the power button.

If after setting up the universal remote control does not work, contact the seller or service center, there may be a defect.

First you need to double-check the codes and repeat the manipulations; sometimes mistakes are made during setup.

Universal remote control vixter rc 3001gn how to set up

A universal TV remote control may be needed for various reasons.

For example, to control multiple screens or due to a breakdown of a proprietary device.

In this article, we will briefly and simply explain how to set up a universal remote control and where to find codes for your TV.

Differences from a regular remote control

The original remote control and the universal one have two significant differences, which significantly increase the cost of the first - this is its “branding” and quality.

How to find out the TV code?

The code is necessary to be able to connect third-party devices with it. These include remote controls, smartphones or tablets.

It ensures device recognition and correct operation. Consists of a unique set of numbers that can be found in this file, as well as in the TV itself.

To do this you will need:

enter ;
open settings;
select the option to connect to your phone;
after entering the “Connect manually” section, a blue code will appear;
remember it or write it down.

Huayu

To configure it you will need:

turn on the TV, point the control unit at it and simultaneously hold down the power and “Set” buttons;
Watch the indicator carefully, it should be on all the time;
use the volume control to set commands;
To exit pairing mode, press the “Set” button.

Automatic adjustment:

turn on the TV, point the remote control at it;
hold down the button indicating the device type;
after the indicator lights up, release it;
press the power button on the UE, this will start an automatic code search;
As soon as the TV turns off, you must quickly press “OK”, this will save the code in memory.

Sometimes the automatic search does not work well, so you need to configure it manually.

Manual adjustment:

after turning on the TV and pressing the “TV” button, the indicator will light up;
releasing it, enter the device code;
after entering the fourth digit, the code will be saved in the device’s memory and the screen will go dark.

Auto-tuning occurs according to the following algorithm:

turn on the TV, point the CP at it, press the button indicating the brand of TV;
hold down the “Set” button and hold until the indicator lights up;
click on channel selection, automatic code selection will begin;
Once the indicator goes off, immediately press the “OK” button to save the found code.

If the button is pressed too late, you will have to do everything again.

The advantage is that by searching through channels, you can regulate in which direction the search will be carried out.

Manual code entry must begin after pressing the “Set” button and the indicator lights up. Enter the numbers you found and click OK. The remote control will remember the specified combination.

Operating principle and purpose of the universal remote control

The operating principle of the remote control (remote control) is to control household appliances using infrared radiation. Inside the device there is a circuit that is programmed using settings and codes to the sensor in the device, such as a set-top box, TV, stereo system, and so on.

From the sensor on the device, information in the form of vibrations is transmitted to the same sensor in the technology. Externally, the control panel is almost no different from the standard ones. The same buttons: Source, Mute, Set, Power, volume control, channel switching.

It can be programmed to control the TV and change channels. If the house has an air conditioner, stereo system, receiver, electric oven or hood, and they have a remote control function, it is worth using ways to reprogram the remote control and synchronize it with the equipment.

Method 1

Turn on and point to the screen.
Press OK, TV or Set for 5 seconds.
If the indicator blinked and went out, the device was successfully attached.
Continued to blink: enter the code corresponding to the device on the remote control.
Press TV. If after setup the TV does not respond to the remote control signal, the code was entered incorrectly. It is recommended to repeat again.

The equipment has types of batteries: AAA type, round batteries for kitchen scales and watches and which are charged with electricity.

Method 2

If the remote control still does not see the TV, it is advisable to activate the equipment in another way:

Press SET or TV until the lamp on the remote control lights up.
Click POWER.
Enter the device code. The indicator light will turn off.
Press MULT or OK if the diode on the remote control does not go out.