TV set-top box iptv hd mini rostelecom instructions

It is very difficult to imagine everyday life without digital technologies. This applies, for example, to digital television, due to which the quality of broadcasting has significantly improved. There are set-top boxes for this purpose. In addition, the user can independently perform manipulations to guide the viewing process. In addition to rewinding a football match or program, you can pause the viewing and record. But in order to fully use the device, you need to know how to flash the Rostelecom set-top box. Updating the software allows you to perform all activities without interference. This is somewhat reminiscent of the process of reinstalling Windows on a personal computer.

Specifications

In terms of appearance and connectors, the IPTV HD Mini set-top box from Rostelecom is no different from most similar devices. It is made in a compact case made of matte plastic. All connectors are located on the back side:

RJ-45 (LAN) for Internet via fiber optic cable;
USB 2.0;
3.5 for sound output;
HDMI;
optical output S/PDIF;
power connector.

The filling can also hardly be called unique:

chipset STi105;
RAM – 256 MB;
ROM – 128 MB;
OS - Linux 2.6.35;
support for drives formatted FAT16/32, NFS, Ext2/3;
video support - 1080i/p, 720p, 576p, 480p, NTSC, PAL.

Equipment selection

In 2021, the company is offering a “Standard” receiver and a Rostelecom IPTV HD Mini set-top box. The IPTV HD Mini tuner is considered an improved “Standard” model. Still, the company more often uses the IPTV RT HD Standart set-top box. You can purchase the device not only at the company’s office, but also in some hardware stores. For example, the tuner is sold in:

El Dorado;
Online Trade;
Yulmart;
M Video;
DNS;
Media Markt.

To connect the equipment, you do not need a cable and a port, since the set-top boxes have a Wi-Fi module. But connecting wirelessly is not reliable, as the risk of interference increases.

How to flash the Rostelecom IPTV STB RT HD set-top box in Infomir MAG-250.

The procedure for flashing the Rostelecom IPTV STB RT HD set-top box in Infomir MAG-250

not complicated, but there are several pitfalls, which I think should be mentioned right away:

1. Before flashing the STB RT HD set-top box

You will need to find a playlist of Rostelecom channels for your Rostelecom branch.
For example, here are Rostelecom playlists. Otherwise, you will not be able to watch Rostelecom digital television
.

2. If you have a Rostelecom remote control

, like this:

Then you need to flash the Rostelecom IPTV STB RT HD set-top box with modified firmware

, since this remote control will not be able to work with standard firmware from Infomir, since it does not have some of the necessary buttons.

3. If you want Internet and digital television on the Rostelecom IPTV STB RT-HD set-top box

at the same time, then in most cases you will not be able to do this due to the technical implementation of the connection.
This feature is available on routers that support UDP-to-HTTP Proxy
.

4. You will not be able to use Rostelecom interactive digital television services

, because they are only available on Rostelecom firmware.

Firmware for TV set-top box Rostelecom IPTV STB RT HD

Standard firmware for MAG-250 (regular remote control)

- link .
Modified firmware for MAG-250 (Rostelecom remote control)
- link.

Resetting the Rostelecom IPTV STB RT HD set-top box to factory settings.

Before changing the firmware of the STB RT HD set-top box

from
Rostelecom
to
Infomir,
it is advisable to reset the set-top box settings to factory settings.
To do this, turn on the set-top box and press the Menu
on the remote control.
The BIOS of the STB RT HD set-top box
will open :

Select Def. Settings

and press the right button (>

Press the right button (>). The following message should appear:

Click the OK

and wait for
the Rostelecom STB RT HD set-top box
.

Firmware for Rostelecom IPTV STB RT HD TV set-top box:

1. Download the MAG250 firmware files

-
Bootstrap
and
imageupdate
and put them in one folder - let it be the
mag250
on the C:\ drive. You should also put the file mcast.exe and DualServer there.

1. Turn on the IPTV STB RT-HD Standart set-top box

, press and hold down the
Menu
on the remote control.

2. We get into the BIOS of the STB RT-HD set-top box:

Select the Upgrade Tools

3. Connect the computer to the set-top box using a LAN cable. Cable crimping is normal, straight.

4. Write the IP address on the network card of your computer 192.168.1.1

and a mask
255.255.255.0
.

5. Run dualserver.exe

.
To do this, you need to launch the command line ( Win+R
and in the
Open
enter
cmd
, click
OK
).

6. In the Windows command line, write the command C:\mag250\dualserver -v

. The server should be up and running. Minimize (not close) the command line window.

7. Run the mcast.exe

double click the mouse.
She will ask you to select the network interface through which we will flash the IPTV STB RT-HD
:

Select 192.168.1.1, Local Area Connection

.
Press the Select
. The following window will open:

Here you need to change the broadcast address of the first stream ( Stream 1

) to the one that listens to
STB RT-HD
-
224.50.0.70:9000
.
the address of the second stream ( Stream 2
).
Press both Start
.

7. On the MAG-250 attachment

MC Upgrade
item and press the > button (right):

After this, the STB RT-HD set-top box

Bootstrap
will start catching at the address of the multicast stream:

If everything is fine, then the IPTV STB RT-HD set-top box

will first display the message
Reception of an image is started
.
If the firmware downloads successfully, you will see the message Writing the image to flash
:

If the firmware is successfully written to the STB RT-HD

— the set-top box will display the message
Writing image to flash successfull
:

After this, the Rostelecom STB RT-HD set-top box

must
reboot with new firmware
.

Attention! Reflash via USB with Rostelecom STB RT-HD on MAG-250

Most likely it won’t work - you will constantly receive the error
File mag250/imageupdate not present
,
even though the file is in the folder, the flash drive is formatted in FAT32 and its size is no more than 8GB. Therefore, flash Rostelecom STB RT-HD
via Multicast.

Alternative firmware

Before you start, you must also prepare a bootable USB flash drive:

Select a flash card no larger than 8GB.
Format it in FAT system
Create a folder “mag250” on the media.
Transfer the Bootstrap and imageupdate files to it.

Alternative firmware via the console menu

Open the “Settings” section in the device menu.
Press the “SETUP” button.
Select the “Software Update” section.
Find “Update via USB”.
Click "Start".
Check the integrity of the data on the media.
Click "Start".

After the update is completed, the bailiff will reboot on its own.

Alternative firmware via BIOS parameters

The flashing process from BIOS is similar to the method described above with the standard version.

Open the BIOS (while turning on the device, press and hold the Menu button).
Open "Upgrade Tools" and "USB Bootstrap".
Insert the removable drive into the special USB connector on the receiver body.
Click "OK".
Wait until the firmware is installed and the system reboots.

If at any stage an error message appears, you need to delete the files from the memory card and rewrite them again. Or use another firmware method.

In the modern world, not a single person can do without watching television programs, reality shows, films and series. But not everyone has the opportunity to connect expensive tariff plans and additional packages to their equipment. An alternative (modified) firmware for the Rostelecom set-top box will retain all the main functions of interactive TV - recording, rewinding, pausing, but will also add many others to the main channels.

Features of the console

Thanks to technical solutions, SmartLabs provides digital home television. SmartLabs is a leading company in our country; it makes it possible to watch TV in good quality. Viewing consoles can be purchased in many countries around the world.

Rostelecom provides subscribers with more than ten models of set-top boxes. In different regions of the country, clients may be provided with different equipment; the choice remains with the provider. Although subscribers cannot choose the type of receiver, they still receive high-quality television that works reliably. But for the set-top box on the TV to work well, you need to connect high-speed wireless Internet.

More often, the company offers equipment that belongs to the STB Mini series. For connection use:

SML-5010CT;
SML-5010;
SML-5041;
SML-5050.

The Rostelecom TV set-top box model 5010 is more popular. Although this type of equipment is considered junior, it is enough to obtain a high-quality digital signal.

You can see other types of devices from Rostelecom on the market. These set-top boxes were released earlier and are still used to install on the TV. These include:

SML-282 HD Base;
SML-482 HD;
SML-292 HD Premium.

Despite their outdated interface, they transmit a clear television signal.

What advantages does the new firmware provide?

The main advantage that a user who decides to unlock everything that was previously inaccessible receives is the ability to watch TV for free without operator restrictions. A nice bonus, in addition to the ability to watch all channels, will be the availability of a home media center service with support for WI-FI and DLNA.

The disadvantage that the firmware of the Rostelecom set-top box contains is the loss of operator services that provide the original personal software installed by the provider.

Equipment

Rostelecom was one of the first to offer clients the opportunity to connect to digital television. More than a million people in the country use TV set-top boxes. The receiver allows subscribers to watch TV in 3D and HD quality. The equipment makes it possible to pause a program or record a broadcast on channels. You can rewind the broadcast or use files saved in the archive.

Manufacturers provide more than ten models of set-top boxes. Users prefer the SML-482 HD device. You should check the equipment before purchasing. If the kit does not contain enough components, you will not be able to connect the receiver. The standard set should include:

Rostelecom set-top box for TV;
battery, i.e. AAA battery;
universal remote control;
power supply from the company or adapter (1.2A and 12V must be present);
The set includes a one and a half meter AV cable, also called a “tulip”;
Ethernet cable to connect to the router, three meters;
HDMI cable, without it connection to LCD and LED TVs is impossible;
instructions for operating the equipment and setting it up;
SCART 3xRCA adapter;
Additionally, the manufacturer includes documentation with a warranty card and a code book.

note
An HDMI cable is not included as standard, so you will have to purchase it separately. Otherwise, the connection will not be possible.

Advantages of IPTV technology

The main advantage of this technology is open access to digital resources such as IP telephony and IP television.

Reliability of data transmission is guaranteed by the similar operating principle of both technologies and the use of fiber optic cable for transmitting a television or telephone signal. Excellent broadcast quality allows you to view programs in high definition with multi-channel sound and excellent color reproduction.

Interactivity is another advantage of the technology: the IP connection works in both directions - from the server to the client and back. Thanks to this, the consumer can control the service from an STB set-top box or computer.

Functional

IPTV HD Mini set-top box is a device designed to provide reception, decryption and display of a signal. This is the main purpose of the receiver. Let us briefly list the main functionality of the set-top box of this model:

playback of content in video format;
subscribing to view paid content;
recording content to various memory storage devices;
electronic guide;
information and entertainment widgets.

The functionality of the device is not limited to this. The console has quite a lot of useful parameters. All settings are divided into two groups: “System” and “My”. Experts strongly do not recommend changing system parameters, since incorrect values can lead to malfunctions in the operation of the set-top box.

Special attention should be paid to the parental control option. It can be accessed through the “Access Level” section. The user will be able to configure age restrictions in this section. The “Social Networks” and “Weather Forecast” widgets will also be useful. All these features can be customized.

We've sorted out the functionality. It's time to briefly list the main advantages of the console in question:

small and compact body, the device takes up minimal free space;
intuitive and simple interface;
playback of content in Full HD format;
elegant and original design of the console;
loyal price.

There are indeed many advantages, but there are also disadvantages. The main flaw is the lack of an internal portal. This means that the set-top box will not function without firmware from the provider. Therefore, users will not be able to use the device as a media player. If in the future you refuse the services of the operator, the set-top box will lie idle.

Another drawback is compatibility problems when connecting Wi-Fi adapters. For example, currently the firmware from Rostelecom does not support devices manufactured by Smartlabs. Of course, this may create additional inconvenience. Today, the set-top box in question is also actively used by the operator Bashtel.

Settings

After purchasing IPTV, you need to configure the device so that you can start watching TV channels. On the control panel, activate the Setup function and perform the following steps in sequence:

Set the date with time. Do this right away because the program recording function is linked to the current time.
To access the Internet, go to the “Network Configuration” menu and define one of the connection types - wired, wireless, PPPoE.
Enter your provider's network parameters or select automatic setup.
Check whether the set-top box is connected to the Internet in the “Network Status” tab.
In the server settings, in the highlighted field, enter “pool.ntp.org.”.
Now you need to adjust the display. Disable DVI forcing and auto frame rate switching. You can do this in the video settings.
To set the resolution in the “Video Output Mode” section, take into account the characteristics of the TV.
Reboot your device.
After restarting, open the “IPTV channels” tab and enter the playlist address in the highlighted field. You can get it from your provider or find it yourself on the Internet.

If the settings are correct, the channel list will appear on the display.

Settings

After checking the availability of the Internet, the set-top box is connected to the TV and then configured. All the necessary wires, as noted earlier, are included with the purchased equipment. It is necessary to connect devices strictly in the off state, since a difference in potential is possible, which can lead to damage to one of the devices.

Setting up interactive television provided by Rostelecom is quite simple. To do this you need:

Switch the TV receiver to AV mode using the TV remote control. If you are using an HDMI cable to connect to the screen, then you should select HDMI rather than AV.
If you have correctly selected the source of information, a branded splash screen will appear on the screen. Consequently, digital television is loaded. This process takes on average no more than a minute.
Once the download is complete, enter the username and password specified in the service agreement. The data has purely digital meaning. They can be entered using the remote control.
If the data is entered correctly and the user identification is completed, a list of television settings will appear on the screen. Therefore, the connection was completed successfully. All you have to do is configure the channels and make additional settings, which include setting up the remote control and its subsequent synchronization for full operation with the set-top box.

Connection using a TV set-top box from Rostelecom

You can borrow a device from the Rostelecom provider that will allow you to watch TV. Unlike antennas, it has many advantages:

Clear and widescreen image. There is also 3D, if the technology supports it.
The ability to pause, rewind, and also play a program that was on yesterday or even a month ago.
A rich collection of feature films and cartoons.
You can connect iptv not only to a TV, but to a PC and even a smartphone.
Parental control option to limit television viewing for children.

Basically, a TV set-top box from Rostelecom is connected and configured by employees of the organization. But sometimes you have to do it yourself. Therefore, to avoid unpleasant situations, let’s figure out how to do this.

What is included in the set-top box from Rostelecom

So, the console has been purchased. First you should look at the package. What does it include:

The device itself.
Power unit.
Remote control with batteries.
Several cables for connection:
VGA or “tulips”;
patch cord. Patch wire;
convector SCART.
Warranty and instructions.

If any components are missing, you must contact the company directly.

How to connect a Rostelecom set-top box

Connecting the interactive receiver will not take much time. After all, the provider has already laid down the initial settings of the device. To get started you will need:

router or network cable entering the apartment;
TV;
console;
suitable cable;
power unit.

To set up television from Rostelecom, you must:

Place the power supply aside. It will be the last thing you need.
Connect a network cable or patch cord from the router to the set-top box. However, when using the latter, you will need to configure it.
Now you need to connect the TV and iptv receiver. To do this, you need to take a suitable cable: HDMI, VGA or use a SCART adapter. It would be preferable, of course, to watch TV via HDMI, as it perfectly conveys image clarity.
The final step is to connect the set-top box to the network by inserting the power supply into the outlet.
For the convenience of users, all connectors on the rear wall are labeled: LAN – network cable, DC – power supply, AV – for VGA. There is also HDMI and USB.

How to set up a Rostelecom set-top box for your TV

Now you need to move on to the next thing - understand how to set up the Rostelecom set-top box. In order to start using interactive TV services, you need:

Turn on the TV.
Using the television remote control, switch to AV mode (if “tulips” were connected to the connector) or HDMI.
Immediately after this, the logo of the Rostelecom provider will appear on the screen.
Then testing of new equipment will begin. This will last for 10 minutes. If the software version is outdated, you will have to wait for an update.
Then a window will appear on the display where you must enter your username and password. They can be found in the service agreement.
If everything is correct, then iptv will work.
However, sometimes a PIN is requested next. In this case, you need to enter the combination of numbers “0000” or “1111”.
If it doesn’t work, you should call the hotline and explain your situation. Number – 8-800-100-08-00.

Video instruction

How to set up a remote control for a set-top box

The set-top box comes with a remote control (RC). With proper synchronization, they can turn on the TV and turn down the volume even without using a regular TV remote control.

In order to configure the remote control, there are two ways:

automatically;
manually - you will have to use special codes.

First, you should consider a simpler option - automatic synchronization.

Press the “OK” and “TV” buttons on the remote control at the same time.
Using the number keys, dial the combination “991”.
Then switch channels using the up or down arrows, thereby selecting the code.
The TV will turn off as soon as it finds the one it needs.
Turn it on again using the console remote control.
Save the settings by clicking "OK". The indicator light will flash to confirm.
Ready.

If it doesn’t work, then you need to open the instructions for your TV and find the code there. Or call the provider's technical support.

Manual setting:

Press “OK” and “TV” together.
We type the found code.
If the TV begins to respond to the remote control, then save it to “OK”.

Functions

The main task of the Rostelecom set-top box is to receive, decode and display the signal on the screen. In addition, you can use it:

subscribe to paid services;
write data to external media;
view the TV program, including archived programs;
install informational and entertainment widgets.

The functionality of a digital set-top box for interactive television does not end there. It offers a large set of settings, which are divided into system and user. It is not recommended to change anything in the first category, as this may lead to failures.

Important! The advantage is the presence

parental controls

– You can set restrictions on the content that your child can access.

It is worth noting that this model is used not only by the provider Rostelecom. It is universal, and to work for a specific operator, proprietary firmware is installed on it. And this is a huge minus. If the user refuses the services of the provider, then he will have to flash the Rostelecom IPTV HD Mini set-top box in some unofficial way in order to use it with other telecom operators. Otherwise, it will simply turn out to be a useless gadget.

What is needed for flashing

To flash a TV set-top box from Rostelecom, you need to go through four steps:

Preparation.
Reset settings.
Official firmware.
Alternative firmware.

It is important to understand that not all models can be reflashed. The instructions described below are suitable for the MAG-200, MAG-250 and IPTV RT-STB-HD Standart brands.

There are two ways to flash a Rostelecom set-top box:

By Multicast.
C USB flash drives.

Additional features

They affect the quality of use of the device and its price level. You need to figure out what you need and what you can refuse. It may turn out that a high price implies the presence of unnecessary functions, and a low price provides truncated functionality. What you can count on:

Using a card reader;
HDMI type connector for enhanced media clarity;
LAN – input for simplified use of the Internet;
The presence of an increased number of USB connectors for various purposes;
Own browser for the Internet of high quality;
Simultaneous viewing of two different video streams;
Using a hard drive to record and save various video information;
Functionality that allows you to listen to sound files and view photos;
Simultaneous recording of high quality video information based on three different sources;
Using the capabilities of the DVB-S2 format.

Will it be possible to watch IPTV on TV without a set-top box?

Recently, Rostelecom has been developing the Wink service, which allows you to watch digital television from computers, mobile devices and on TVs with Smart TV, Android TV or Apple TV. To access, you need to install the Wink application and enter authorization data for an account with a paid subscription.

However, when concluding a contract, you cannot ignore the need to purchase equipment. After all, the service is activated only if the client purchases or leases the device.

Blog about modems, routers and gpon ont terminals.

For many users of Rostelecom digital television, it has long been no secret that channels can be watched using a playlist without tariff restrictions. And Rostelecom is in no hurry to close this opportunity. The playlist can be launched on a computer using VLC player, or on Smart TVs using widgets. The playlist can also be launched on several models of Rostelecom TV set-top boxes - MAG-200, MAG-250 and IPTV RT-STB-HD Standart. It is on these set-top boxes that you can download the standard firmware from the manufacturer (Infomir) and use all the advantages of a very good media center with WiFi and DLNA. This instruction will also be very useful for those who, when connecting to digital television from Rostelecom, bought a TV set-top box, and after some time they turned off and now the set-top box lies as a dead weight. Now this situation can be corrected and I will tell you how to flash MAG-250 and its clone copy IPTV RT-STB-HD with Rostelecom on Infomir.

What to rely on when choosing?

It is necessary to decide on the correct type of connection for the IPTV set-top box (SMARt-TV). If we are talking about a modern TV, then it is better to use an HDMI connector. And in the case of older versions, this is a VGA or AV port. Let's consider other parameters:

The processor must have at least four cores. This guarantees operation without any noticeable problems;
It is better to use RAM at least 2 GB of memory. But, if possible, purchase versions with a larger volume. And the built-in memory, although not so important, we recommend about 8 GB - it can be significantly expanded using a MicroSD card;
The operating system is also important. Android-based models usually cost less. And many useful applications have been created for it, gaming, social and office applications.

Setting up the remote control and synchronizing it

After installing and configuring the equipment, you need to check whether the remote control is synchronized. It allows you to perform basic actions and control the TV - adjust the sound, brightness and contrast, change channels. Otherwise, you will have to use the TV remote control. In some cases, this is inconvenient, since you have to use two remote controls at once.

The remote control is synchronized in two modes:

Manual, when the configuration is performed directly by a person;
Automatic, when all codes are entered by the receiver.

In manual mode, the code for synchronization is entered manually. It is used mainly for older TV models. Codes are provided on the Rostelecom website.

The automatic setup mode on the IPTV set-top box starts after successively pressing the TV and OK buttons. As soon as the codes match, the TV will turn off. For further work, you need to save the settings by clicking on the OK button again.