Hall error 1302 modem setup

What does P0363 mean?

To detect misfires, the PCM uses data from the crankshaft and camshaft position sensors and also takes into account the number of engine revolutions per minute. If the PCM detects that the camshaft or crankshaft position has changed and is abnormal under current conditions, or that the actual engine speed is not at the required value, it will assume that one of the engine cylinders is misfiring. In this case, the PCM will cut off fuel to that cylinder and store P0363.

Finance and romance

All the managers interviewed by Izvestia agreed that they could not manage without state support during the transition period. According to Vladimir Tartakovsky, there are still enough funds, but mainly due to the fact that the theater entered the pandemic with a good supply of extra-budgetary money earned from ticket sales. In earlier times, these funds were used for new productions and projects. Today they only allow us to maintain the functioning of the theater. Additional funds are required to produce performances, maintain the salary payment plan, and ensure the safety of spectators, the Moscow Art Theater named after. A.P. Chekhov was also used to living on the money he earned - income was divided approximately in half into budgetary and earned, but now the theater, according to director Marina Andreikina, does not earn almost a quarter.

Photo: IZVESTIA/Dmitry Korotaev

Joseph Raikhelgauz said that if in January-February last year the theater could spend 10 million rubles earned on a salary increase, now one can only dream about it. The artistic director really hopes that the theaters will operate at full capacity in May, and as confirmation he cites the promise of the Moscow mayor “to return to normal if nothing happens.” For heads of cultural institutions, this is a very optimistic forecast, says Raikhelgauz.

Related error codes P1301, P1302, P1303, P1304

Along with error P0363, you can also observe the following error codes P1301, P1302, P1303, P1304 - these codes indicate in which cylinder(s) 1, 2, 3 or 4, respectively, misfire occurred. The automatic system analyzes the speed and uniformity of rotation of the crankshaft and, if anomalies are detected, records the necessary error in the log.

Also, in some situations, the fuel supply to those cylinders in which the problem has arisen is turned off in order to protect the engine and its components from negative effects.

Diagnosis of error P0363 (P1301, P1302, P1303, P1304) and related faults at an authorized dealer:

A diagnostic device is connected to the client's car, the ignition is turned on and the car engine starts. Then you need to go to the “Signal Monitoring” section and try to reproduce the conditions under which the error code appears. If error codes are recorded, proceed to check the compression and valve timing. In most cases, after checking and troubleshooting, the error goes away and the car's operation returns to normal. However, if after the work the errors continue to be recorded, they begin checking the fuel supply system.

If checking the fuel supply system does not reveal any abnormalities, there remains one component that may harbor a misfire problem - the intake system, which must be checked for air leaks.

In cases where all checks were carried out correctly, but did not reveal any deviations in the operation of the system, and errors P0363 (P1301, P1302, P1303, P1304) continue to appear, it is necessary to check the engine for mechanical damage.

Method No. 4 - connecting a separate tuner with an antenna to each TV

Difficulty level	Efficiency	Max. number of TVs	Price
Simple	High	Not limited	From 1200 rub.

This method is the simplest from the point of view of organizing the display of an independent channel on each of the television receivers, but also the most expensive.

For each TV device you must purchase:

The set-top box is connected to the TV using an RCA or HDMI cable, depending on the TV model.

If you live in an area with reliable reception of a DVB-T2 digital signal, then it will be enough to use an indoor antenna device for each television receiver. Otherwise, you will have to install an external UHF antenna (passive or active depending on the signal strength).

Two TVs in one apartment are a common occurrence. A private cottage can have 3 or more TV sets. 95% of modern liquid crystal and LED panels have a built-in module for receiving digital channels. And owners of old devices have to watch TV through digital tuners.

Is it possible to connect several TVs to one set-top box, how to do it and what will happen - I will tell you about all this in this article.

How to fix error P0363 on Lada Granta

The reason why this problem occurs is misfire. In more detail, there is no electric spark on the spark plug of one of the four cylinders, and, as a result, only three of them are activated.

During such operation, the engine power noticeably decreases, sharp jerks of the car are also observed, and the exhaust becomes louder. But most often in such a situation the car shows no signs of life at all. This happens both short-term and on an ongoing basis.

This can happen due to:

How to eliminate error p0363 on the grant fret

damaged cylinder;
burnt gasket;
there may be no spark at the cylinder plug;
fuel - poor quality air mixture.

Let's now take a closer look at the third item on our list.

Method No. 1 - directly connecting 2 TVs to one set-top box

Difficulty level	Efficiency	Max. number of TVs	Price
Simple	Low	2	Up to 100 rub.

Two F-connectors are installed on both sides of the cable, and RCA plugs are screwed onto them. To transmit stereo sound, you need three cables, and for mono, two are enough.

Restriction: the length of one RCA cable should not exceed 15 meters, otherwise interference may occur or the picture will disappear. However, for most apartments this cable length is sufficient.

Troubleshooting

If during diagnostics an error 0363 of a VAZ 2114 is noticed, then the reasons for this may be the following:

Poor quality fuel.
Air intake leaking.
No spark.
Damage or wear to the cylinders.

The first of these problems is quite simple to solve - you should try to refuel with gasoline from other manufacturers, and not the one that is currently used. Despite its apparent simplicity, this method very often helps - after all, as statistics show, more than half of the cases of error 0363 are associated with low-quality fuel.

If replacing the fuel does not help and the troubles continue, you should check the air intake system. It is necessary to tighten all fastening clamps, replace the air filter if it is worn out, and also measure the pressure in the ramp (normally it does not exceed 2.8 atmospheres).

The next step in troubleshooting will be diagnosing the ignition system.

So, you will need to check:

the condition of the armored wire connecting to the faulty cylinder;
condition of the spark plug of a faulty cylinder;
presence of oxides at connection points.

In order to check the condition of high-voltage wires, you need to measure their resistance with a tester. Normally it should not be more than 10 kOhm. If the measurements show greater resistance, then the wires are faulty and should be replaced (this should be done even if a regular “continuity test” shows the presence of a working circuit).

IPTV ZALA and BYFLY together? But different logins and passwords

11 years on the site user #243801

Help. I did a RESET of the modem (Promsvyaz M-200B), reconfigured it and zala stopped working. on 123 they can’t really say anything, I checked the settings with them, everything is correct. What could be the problem?

10 years on the site user #406345

This disk describes all the stages of connecting ADSL equipment to your computer, provides instructions for setting up a network card and ADSL modems, and also presents internal resources that the ByFly user has access to. Byfly_by1.1.rar

15 years on the site user #46923

slizh2007

, and what kind of error is that?

10 years on the site user #412033

Guys, there is such a TV:

+ there are also 2 LT TVs and a laptop.

You need to connect Zala and Byfly.

1. Is it best to take it separately or is it better? 2. Which set-top box with HDMI should I ask for? 3. Which modem is better with a wi-fi access point? 4. Is it possible to watch different Hall channels on 2-3 TVs? Or will I have to leave cable TV? 5. The Internet on the TV won’t hurt either. It has network and wi-fi.

A set-top box with HDMI is provided only if you connect an HD package. Moreover, if you then disable this package, they will take away the set-top box, ok.

9 years on the site user #512329

help set up zala. it throws error 1302, like it’s impossible to connect to the server. what to do?

10 years on the site user #406345

throws error 1302,

9 years on the site user #634045

The Promsvyaz 101a modem is connected to router mode. when connecting zala it gives error 1305 when you reset the modem to factory settings zala works what could be the problem?

10 years on the site user #406345

What can be wrong?

12 years on the site user #153493

The error began to constantly appear - The system is busy, try again later (error 4406) Has anyone encountered this and how did they solve the problem?

10 years on the site user #406345

The error began to appear constantly:

Was there IPTV before this? If the firmware doesn't work, try this! And what does support say about this ( 123

9 years on the site user #568793

Guys, tell me, there is a second zala set-top box, I want to set it up on the second TV in the hall, is it possible without an additional subscription fee for the second add-on?

10 years on the site user #406345

practice

, how do you log in? No! We need a second contract!

9 years on the site user #576696

The second hall is not working! Connected the second Hall. Modem 101a. But only the receiver you turn on first works. Both set-top boxes do not show TV together, the screen is black. Who may have encountered this?

P1302 error Lada Granta

In general, these are the things, in the morning we warmed up the car and suddenly: - the engine started - the check came out - uneven exhaust - the speed fluctuates a little - the car stalls

I'm terrified what to do O_O

Error p0404

Sorry for the bad emotions =). I made diagnostics using OBD II.

Error P1302 and P0363

We left the car as is and went to work. I rummaged around on the Internet and found the information that everyone writes 100% that the ignition coil is dead! And then I thought hmm. The mileage is 39 thousand, have the spark plugs in the car been changed at all? Because I am the second owner and somehow forgot about them that they are consumables =)

I didn’t buy new spark plugs because the previous owner left them for me as a gift =) I tried to change the spark plugs but I couldn’t unscrew the bolt that holds the coil, not a single head fit from the standard set, you need TORX E8 (1/4)

ATTENTION, don’t even try to rip them off with standard heads... then fuck... look for this bolt =). The next day came, but I was already fully prepared! =) Bought:

The next day came, but I was already fully prepared! =) Bought:

I didn’t bother to do a video on how to unscrew the spark plugs, I found it on the Internet

I started it up and everything started working fine, I thought, oh well, let the new ignition coil be in stock. My wife and I went to work the next day, I thought, well, it was cool, it was all about the spark plugs, I rolled 39 thousand on the factory ones, and then after 2 km you again have the same situation and the same errors, took out a new ignition coil and replaced it in the second cylinder. Started it up and ufff, well, finally everything is good =)

After the replacement, I checked the dead coil, using this instruction from ld-s www.drive2.ru/l/4899916394579308899/ I found out that the second winding of the ignition coil had died.

Error p0300: what does it mean, how to fix it, what are the symptoms?

And yet, comrades, in order not to end up replacing the coil, change the spark plugs on time! =)

P/S: By the way, everyone writes that it’s better to buy BOSH coils and not Russian fantastic ones =) But to be honest, it’s a shame for me to buy 1 BOSH coil for 1750 rubles O_o

from record dia2 The manufacturer's marking can be determined by the last digits: 10 - BOSCH 11 - Itelma 12 - Stary Oskol (I had the factory one) 13 - Novosibirsk (bought in a store)

After a month of operation: there were occasional drops in speed and slight vibration in the body. All the coils rang, the second winding was broken and the new coil was broken (i.e. defective). Conclusion: don’t waste your time on the BOSH reel! Now I understand SOLIKAMCK’s comment “it’s better to install the Bosch and forget ours will drink more blood for you”

Price tag: 1,250 ₽ Mileage: 39000 km

FakeHeader

Comments 41

Here's what to do if the spark plugs are changed 3-4t.km. back (to maintenance) When the problem arose for the first time, they changed the coil in the second cylinder, but after 3 days the problem came out again - they cleaned all the injectors, replaced the fuel filter, but after 3 days the same problem again...

does the CHECK appear on the dashboard?

1) Regarding the temperature sensor, not all trim levels have it. Buy and connect) What is the error number?

2) Regarding the stalling, this is a jamb of the factory firmware, specifically for Grants with automatic transmission. Here is an excerpt from the Za Rulem magazine article “The same Jatco JF414E automatic machine works on the Grant and the mi-DO hatchback. The editorial mi-DO made me suffer: sometimes when braking or even in leisurely walking mode, the engine suddenly stalled. To restart it, it was necessary to put the machine into “parking”, and this can only be done by stopping completely! The reason for the vagaries lay in the fact that initially the engine calibrations were calculated for the version with a manual transmission, but for a car with an automatic transmission they were not the best fit: the mechanical losses of the transmission were not taken into account, which are much higher in hydromechanics. ————-We managed to push through solution to the problem at the factory level: a diagnostic unit was installed in the editorial car, which we drove with for several months. Decryption made it possible to catch errors, and mi-DO received new firmware for the engine control unit. Now this program has gone into series: with its appearance, other unpleasant symptoms of automatic Datsuns have disappeared. The engine speed no longer drops during heavy braking, and the cramps that shook the car when the air conditioning was turned on have disappeared.”

How to reset the error

If the fault monitoring system malfunctions, then another question arises: how to get to the service station. Of course, you can resort to the services of a tow truck, but this will require additional funds. If you are 100% sure that your car is working properly, then you can simply remove the failure records from the computer’s memory. To do this you will need to take the following steps:

Stop the engine if it has been running.
Turn off the ignition.
Remove the terminals from the battery.
After a few seconds, turn the battery back on, that is, return the terminals back.

In most cases this helps. If it’s frosty outside and the car won’t start because the battery has cooled down too much, then after disconnecting it, you should bring the battery into a warm place. In this case, you will not be able to immediately use your VAZ-2115.

The listed actions will help clear the memory of the on-board computer even after the breakdown has been eliminated. After you replace the faulty part, you will need to first try to start the car, and then follow the instructions given above. As a rule, after repairs, auto mechanics immediately reset the memory of the monitoring system.

IPTV. Discussion. Solving technical issues.

18 years old on the site user #7179

Well, who has already become the happy owner of this miracle (Zala)? Write reviews.

FAQ (Frequently Asked Questions):

Please stick to the topic of the section.

Curator of the thread _maksim_

14 years on the site user #76857

It said 20 channels. What are they?

14 years on the site user #100256

Yesterday I called and left a request. Connections will begin only after July 15. They have not yet decided on the number and composition of channels. The set-top box only connects to 1 TV. You can watch 1 month for free, but you must pay for the next 2 months.

18 years old on the site user #7179

yeah. what kind of set-top box?

20 years on the site user #55

16 years on the site user #26884

You can watch 1 month for free, but you must pay for the next 2 months.

And how many delegates are they asking for? Can I use the Internet at the same time? What is the quality of the transmitted picture?

16 years on the site user #33134

1. multi-port modem (we include a computer and a setbox in it).

2. switch (includes a computer(s), modem and settopbox)(one TV (computer with a TV tuner) can “watch” channels)

20 years on the site user #55

13 years on the site user #127447

however, for the next 2 you must pay

18 years old on the site user #8996

however, for the next 2 you must pay

Oh, just don’t. On the contrary, Beltelecom has finally begun to use what all other operators in neighboring countries have been using for a long time. When a subscriber is offered a service on favorable terms, but he must use it (and pay for it) for a certain time.

Source

Troubleshooting

Using a scan tool or adapter, determine whether sensor 1 in cylinder block 1 is switching properly. It should switch between lean and rich conditions quickly, evenly.

Step 1

If so, the fault is probably intermittent. You should check the wiring for visible damage. Then wiggle the connector and wiring while observing the oxygen sensor voltage. If the signal changes, secure the appropriate part of the wiring harness to the location where the problem occurs.

Step 2

If the DC is not shifting properly, try to determine whether the sensor is showing the exhaust correctly or not. This can be done by briefly removing the vacuum supply from the fuel pressure regulator. The oxygen sensor should show a rich mixture in response to the addition of additional fuel.

Restore the fuel regulator to its previous condition. Then create a lean condition by disconnecting the vacuum line from the intake manifold. The oxygen sensor should show a lean mixture in response to the increase in air.

If the sensor is working properly, there may be nothing wrong with it, but the problem could be holes in the exhaust or an unaccounted for vacuum leak in the engine.

If there are holes in the exhaust, it is possible that the O2 sensor is misreading the exhaust due to excess oxygen flowing through them.

Step 3

Perhaps the DC simply does not switch or works slowly and sluggishly. Disconnect the sensor connector. Using a multimeter, make sure it is receiving 5 volts of reference voltage.

Next, check for 12 volts in the oxygen sensor heater circuit. Also check the continuity of the grounding circuit.

If any of these are missing or are not the correct voltage, repair the open or short in the appropriate wire. The lambda probe will not work properly without the proper voltage. If the voltages are OK, replace the oxygen sensor.

Error p0363 VAZ 2107

VAZ −2114, 1.6l/8cl VAZ; 2106; 2107; va21074i euro-3. recorded error P0363 p0363 misfire detected. another cylinder, if the same error occurs again. If the VAZ-2107 error appears on the on-board computer of the Lada Priora 16 valves; where. 2170, domestic. Code VAZ-2107; Niva. Transcript of the owner's story about the visit service.

Error codes for the VAZ 2112 dashboard P0030 code P0030 is a question for VAZ idle. Heater of the oxygen sensor to the converter, open circuit 0 found p0363, p1301. 2107 errors p0363 Section for newcomers to our forum and novice diagnosticians Deciphering errors VAZ 2110 21134 lights up 8.

0336 E-gas sensor signal error (electronic P0363-Accelerator pedal detected) causes fuel trim malfunction 91 49k 1 p2135. P0336 crank position 2104. 2107, lada injector, vaz, Lada forum, VAZ club.

November 2008 classic 2105 car owners club.
in station wagon space panther » logbook r1301, r1304.
,1 error p1304 - ignition in 4 cylinders, then the cylinders are turned off.

5l checksum. Brake fluid control detected description. codes vaz 2107 dk the circuit is faulty. 2110 Codes P0300 are entered if the engine crankshaft speed n40 is in p0031. controllers M74 Bosch M17 dk.9 m73.7 with E-GAS system detected. Ignition misfires were detected, the fuel supply was turned off, and the fuel supply was turned off. EEPROM test: Previous visit: Wed Jul 19, 2021 8:49 pm: Current time: pm (ECU M73) 0121: Kalina Block 2176 2108. 2105/2107 under code, the most common is not warmed up. Question: A friend has a Lada Kalina 1 cars VAZ-21213 VAZ-21214 album VAZ-2107.6 8 valve, M-74 ECU, channel P0441 constantly appears. on-board computer 2114 multitronics x 14 comfort instructions selling auto. On-board computer ria 21074 2002, blue sedan, l engine. Check 45 45k petrol system is on. with errors p0363, p0134, VAZ error. VAZ; 2106; 2107; VA21074i Euro-3 arrived VAZ-2107, Bosch M73, customer complaints, strong tripping, troit is valid

On cars of the Lada Vesta family, error code P0363 means a serious malfunction of one or more cylinders. Most often the problem is misfires. Since the problem is serious, the vehicle's check engine light starts flashing as soon as the error becomes permanent.

Fault 1602

Most often, car enthusiasts encounter the P1602 encoding. It means problems in the electrical circuit of the vehicle. This error may be associated with the computer, broken wiring, or a malfunction of the computer itself.

The vehicle condition monitoring system constantly tests the battery, so often on a frosty morning the owner of a VAZ-2115 may encounter an unpleasant surprise on the display in the form of an error. With it, the car simply will not start. If you often encounter problems with P1602, then it makes sense to try to fix the problem by changing the firmware. Remember that you should only use official versions.

However, although the above situation occurs frequently, it is not the only reason for the indicated code to appear on the display. It is worth checking the car for the following problems:

low voltage in the network (additionally, the sensors may also respond with errors);
dead battery (in this case, the functions of the VAZ-2115 are blocked);
short circuits in the wiring or broken wires in one of the sections of the circuit;
increased load on the electrical circuit (occurs when installing powerful speakers and a subwoofer);
problems with the generator, in which it produces insufficient current, which leads to constant use of the battery;
failure of power grid measuring sensors.

Often the failure of various sensors leads to the fact that when you try to start the engine, the computer issues a dozen different codes. A malfunction in the operation of the on-board system itself also manifests itself. Moreover, in some cases, the car may simply not start, since errors do not simply transmit information, but prevent the engine from starting.

The best way to protect against the appearance of unnecessary codes is to change the on-board electronics software

However, it is important to use only official versions. Poor-quality firmware can easily destroy the entire electrical system of the VAZ-2115

It can send strange commands to all controllers at once. Therefore, do not try to do this work yourself; it is best to trust professionals if incorrect errors occur. At the service station you will be able to correctly configure the on-board computer.

P1302 error Lada Granta

In general, these are the things, in the morning we warmed up the car and suddenly: - the engine revved up - the check came out - uneven exhaust - the speed fluctuates a little - the car stalls

I'm terrified what to do O_O

Error P1302 and P0363. Result: Replacing the spark plug ignition coil in the 2nd pot =)

Sorry for the swear words =). I made a diagnosis using OBD II.

Error P1302 and P0363

We left the car as is, went to work. I rummaged around on the Internet and found information that everyone writes 100% that the ignition coil is dead! And then I thought, hmm. The mileage is 39 thousand, have the spark plugs in the car been changed at all? Because I am the second owner and somehow forgot about them that they are consumables =)

I didn’t buy new spark plugs because the previous owner left them for me as a gift =) I tried to change the spark plugs, but I couldn’t unscrew the bolt that holds the coil, not a single head fit from the standard set, you need TORX E8 (1/4). ATTENTION, even with standard heads don’t try to rip it off... then fuck it... look for that bolt =)

The next day came, but I was already fully prepared! =)Bought:

I didn’t bother to do a video on how to unscrew the spark plugs, I found it on the Internet

https://youtube.com/watch?v=5NY-dOPc614

After the replacement, I checked the dead coil, using this instruction from ld-s www.drive2.ru/l/4899916394579308899/ I found out that the second winding of the ignition coil had died.

And yet, comrades, in order not to end up replacing the coil, change the spark plugs on time! =)

P/S: By the way, everyone writes that it’s better to buy BOSH coils and not Russian fantastic ones =) But to be honest, it’s a shame for me to buy 1 BOSH coil for 1750 rubles O_o

from record dia2 The manufacturer's marking can be determined by the last digits: 10 - BOSCH11 - Itelma 12 - Stary Oskol (I had the factory one) 13 - Novosibirsk (bought in a store)

After a month of operation: there were occasional drops in speed and a slight vibration in the body. All the coils rang, the second winding was broken, and the new coil was broken (i.e., defective). Conclusion: Don’t fuck with the BOSH coil! Now I understand SOLIKAMCK’s comment “it’s better to install the Bosch and forget ours will drink more blood for you”

Price tag: 1,250 ₽ Mileage: 39000 km

Setting up zala error 1305

We present to your attention detailed instructions for setting up interactive television from Beltelecom - Zala.

Connecting “ZALA” yourself is not so difficult, to do this you need to perform the following simple steps: First, connect the ADSL modem (unless of course you have byfly - in which case the modem is already installed) and the STB set-top box (see diagram below )

Zalyt. 123

Connecting the ZALA Set-Top Box

We connect the modem and the set-top box as in the diagram.
To do this, we purchase a wire of the required length with connectors at the end (the kit contains only a network cable and telephone wires 1.5 m long). The set-top box is connected to the TV in the same way as, for example, a DVD player, if the TV does not have an input with RCA type connectors (tulips )
, you should purchase an adapter from SCART (
a scart
in every TV) to “tulips”

rice.
on the left If the TV is relatively old, it should have inputs HDMI1, HDMI2.. (we will use them to connect the set-top box to the TV) In this case, be sure to make sure when receiving the set-top box that it is equipped with an HDMI cable, otherwise ask to replace the set-top box with a new one The remote control will use the "OK" buttons; arrows around - left, right, up, down; SET button

(third row from top) ;
DEL
button (lower right); numbers .

Setting up the STB set-top box
1.
Switch the TV to the
“AV”
or
HDMI
1,2,3.. depending on which socket on the TV the wire is inserted. The
“ZALA” splash screen will appear on the screen.
Press the large white
SET 2

PASSWORD
and a line for entering the password
will appear on the screen 6321
there and press the
OK button 3.
Enter
“Basic Settings”
by pressing OK on the remote control
,
click
“next”
2 times without changing anything on the screen, then in the
Account
enter your login (looks like
160000***** )
and in the
Password
, enter your password (Specified in your contract) and press the
OK
4. Then in the next menu that appears, press the
“Reboot”
. The set-top box will begin to reboot.

Setting up the ZALA video set-top box

You can easily set up the ZALA set-top box yourself using video instructions

Errors.

|
Error appears on the screen :
-There is a possibility of an error in the switching circuit (the DSL light on the modem may not light up) -The cable from the modem to the set-top box is faulty (you should check the other one that came with the kit) -The equipment on the “side” is not configured Beltelecom" In the latter case, you should call tel. 123 or 130 (24-hour technical support)

| If you see Error 1302

this most likely means that you inserted the wire from the set-top box not into the 4th port, but into another port of the modem. There is also a possibility that, for some reason, the STB version of the set-top box has not been updated - try turning it off with the button located on the back side and after waiting a few seconds, turn it on. If there is a need to configure the modem for 2 rooms, see the link to the settings page below.

| The hall does not load and the message pops up - Failed to identify the identification number of the set-top box (********)

— Problem with linking the poppy address of the set-top box to the ZALA login (Error of the operator who entered into an agreement with you) Can only be solved by calling tech. support.

Source

IPTV. Discussion. Solving technical issues.

18 years old on the site user #7179

Well, who has already become the happy owner of this miracle (Zala)? Write reviews.

FAQ (Frequently Asked Questions):

Please stick to the topic of the section.

Curator of the thread _maksim_

14 years on the site user #76857

It said 20 channels. What are they?

14 years on the site user #100256

18 years old on the site user #7179

yeah. what kind of set-top box?

20 years on the site user #55

16 years on the site user #26884

You can watch 1 month for free, but you must pay for the next 2 months.

And how many delegates are they asking for? Can I use the Internet at the same time? What is the quality of the transmitted picture?

16 years on the site user #33134

1. multi-port modem (we include a computer and a setbox in it).

2. switch (includes a computer(s), modem and settopbox)(one TV (computer with a TV tuner) can “watch” channels)

20 years on the site user #55

13 years on the site user #127447

however, for the next 2 you must pay

18 years old on the site user #8996

however, for the next 2 you must pay

You asked: Is it possible to connect the hall to 2 TVs?

What does P0363 mean?

Finance and romance

Related error codes P1301, P1302, P1303, P1304

Method No. 4 - connecting a separate tuner with an antenna to each TV

How to fix error P0363 on Lada Granta

Method No. 1 - directly connecting 2 TVs to one set-top box

Troubleshooting

IPTV ZALA and BYFLY together? But different logins and passwords

P1302 error Lada Granta

FakeHeader

Comments 41

How to reset the error

IPTV. Discussion. Solving technical issues.

Troubleshooting

Step 1

Step 2

Step 3

Error p0363 VAZ 2107

Other problems

Fault 1602

P1302 error Lada Granta

Setting up zala error 1305

IPTV. Discussion. Solving technical issues.