How to connect a huayu universal remote control to a TV: codes, instructions

The question arose: “How to set up the Huayu universal remote control?” It’s worth starting with the fact that a universal control panel will eliminate problems with home appliances. Use one device to change channels on your TV, adjust the power of your air conditioner, or turn off the lights. Before you use the gadget, you need to configure it. There are no difficulties here. Setting personal parameters follows a single principle. Pay attention to the instructions. Follow the steps and follow the recommendations.

Introduction to the topic

Currently, universal remote controls are sold in many hardware stores.
You can also easily find a catalog of these devices on the Internet. Such a variety of universal remote controls makes choosing the right device very difficult. A universal remote control is a type of remote control that can be used to control a large number of devices. The main difference from the standard remote control, which is supplied in all types of household appliances, is that the universal device is an independent product that can be purchased separately. The final cost of the device is determined by the number of technologies and systems with which the universal remote control is equipped. Products located in the lower price category can serve a limited number of devices, the model of which is determined by the manufacturer, and also have a small number of functions. Devices from a more expensive price category are equipped with a function that allows you to independently configure the necessary technical parameters. However, these functions will be useless for a person who is not very literate in programming.

There are many remote controls for the receiver

A set of basic elements that a standard universal control panel has:

1. A power and switch key that allows control to be transferred from one device currently being controlled to another device. Using standard buttons, you can navigate between the following devices: TV, satellite receiver, VCR, DVD player and audio equipment.
2. Buttons for adjusting sound settings, as well as sequential channel switching.
3. A numeric keypad that allows you to enter a specific channel number. Also, thanks to this keyboard, you can perform other functions, for example: setting the time and date.
4. Programming keys. In some models, a protective system is installed against accidental pressing of these keys.
5. A large number of universal remote controls are equipped with a special joystick, with which you can easily control the navigation and menu of the receiver or other technical device. The instructions must specify what each of the keys means.

In this video you will learn more about this remote control:

More expensive UPDUs are equipped with the following functions:

1. The ability to program a key in such a way that with one press it is carried out a certain sequential combination of actions.
2. Some models are equipped with a liquid crystal screen that displays current information. In the most modern devices, LCD screens are equipped with touch-sensitive technology.
3. A set of keys that the user programs at his own request.
4. The ability to perform any elementary action in relation to any equipment, without resorting to switching the remote control to control this device. For example: adjusting the volume on a TV when the universal remote control is in control mode of a digital TV set-top box or receiver.
5. Possibility of learning a new type of infrared signal.
6. Also, some remote control units can be connected to a personal computer in order to quickly and easily configure the device.
7. The most advanced versions of the UPDU are equipped with a radiotelephone base, with the help of which it is possible to make television calls.

Setting up the HUAYU DVB-T2+3 remote control (ver. 2018-2)

To configure the remote control, use one of the methods indicated below.

Manual code entry:

1. Turn on the TV manually, set it to normal operation, point the remote control at the DVB-T2 receiver (set-top box), then find the remote control in the table that matches your original remote control.

2. Press the POWER + MUTE button, the LED on the remote control will light up, and then enter the three-digit code corresponding to your remote control.

• 
  How to set up a remote control: universal instructions for universal remote controls

3. Make sure that all other functions (for example, volume buttons) are working properly. If any buttons do not work correctly, repeat the instructions in steps 2 and 3 until a suitable code combination is found.

..

Automatic code search

1. Turn on the TV manually, set it to normal operation, use the HUAYU DVB-T2+2 universal remote control on the receiver (set-top box).

2. Press and hold the POWER button for 6 seconds. The automatic code search mode will turn on. Wait until the volume indicator appears on the TV screen, then release the button to complete the setting.

3. Make sure that all other functions (for example, volume buttons) are working properly. If any buttons do not work correctly, repeat the instructions in steps 2 and 3 until a suitable code combination is found.

Note: searching the entire database goes in a circle and takes about 2 minutes. Therefore, if the Volume scale still does not appear after 2 minutes, this means that your set-top box has an incompatible code.

Specifications

Remote control range: about 10 meters (depending on model) Battery type: 2 AAA batteries

How to unlock the TV remote control: universal methods

There are methods to return the device to working condition, common to all models, regardless of manufacturer and other characteristics. If you still have the instruction manual, then use the section that describes possible malfunctions and how to eliminate them. For a locked remote control, this may be a special key combination. If you lose the instructions, you can search for them on the Internet.

ATTENTION! Before using the methods below, make sure that the batteries (or batteries) are in working condition.

Options and combinations of buttons that work on most devices:

1. Remove the batteries from the remote control. Press and hold the power button while replacing the batteries.
2. Pressing any button continuously for 10 seconds may help.
3. Try pressing “+” and “P” at the same time. If the LED is continuously lit, then hold the buttons pressed and dial the sequence: “Channel plus” and “Menu” (or “Sound +” and “Menu”).
4. By holding "P" and "plus" you can apply the universal sequence, "1234". Or it can be a combination of identical characters, for example “1111”.

IMPORTANT! We must complete these combinations with the “+” key.

How to properly set up your TV remote?

We bring to your attention detailed instructions for correctly setting up the remote control yourself. For this you will need:

• remote;
• instructions for the household appliance;
• power supply (batteries).

Which universal TV remote control is better to choose? Experienced experts recommend choosing multifunctional devices with a large number of control buttons.

When you have decided on the type of device, you can proceed to configuration. It includes:

The first step is to choose the right battery. Each model has different compartments for storing batteries. It is recommended to observe polarity during installation.

Further, in the instructions for the household device, information codes are written for each TV model. Manufacturers of universal TV remote controls have developed several types of devices that are suitable for modern plasma panels. Thanks to this, one device can control several TVs at the same time.

When all codes have been entered, you must press the two buttons SET and TV. If the entered values ​​are suitable for the device, the POWER key on the remote control lights up. This indicates that the universal device is connected in the TV panel menu.

After this, the device is directed instead of the infrared sensor and the button is turned on. If the device responded to the universal remote control, then here you need to press any other command except the SET button.

Next, move on to manual channel tuning. In the menu item, click the desired program. After this, simultaneously press two buttons SET and TV. They are held until the POWER key indicator appears. Now turn on the desired channel. Commands are given until the universal remote control begins to respond to the specified parameters.

When you press other commands, a volume section will appear on the display. Here you need to quickly press the MUTE button. This will allow you to adjust the volume of television programs while watching.

• How to fix lg tv remote control

In addition, the design provides for an acceptable noise level. It can be adjusted by pressing the volume buttons.

The photo of the universal remote control shows popular models of household devices.

Methods for unlocking TV remotes of various brands

Depending on the manufacturer, methods for restoring the functionality of the device may vary.

Samsung model remotes

They have a special built-in “Hotel Mode”. It is useful when staying in hotels, but at home it can create problems for the user. When activated, the device performs only one action - switching channels. To disable this mode, you need to go to the operating menu using the keyboard shortcut specified in the instructions. If you do not have an instruction manual, you can try the following sequences:

REFERENCE! For European-assembled models, press “STANDBY”, “DISPLAY”, “”, “MUTE”, “POWER” in turn.

Philips and Sharp TVs

Devices can be unlocked using universal 4-button shortcuts. Or use one of the following methods:

• simultaneously press and hold the power key and “Vol -”;
• or press the “+” button and adjust the volume together.

An empty channel appears, from which there is an exit to parental control. Disabling the latter will unlock the remote control.

ATTENTION! You must not violate the specified order of dialing numbers. In all of these cases, you should press the keys quickly, without a delay between clicks.

The Philips remote control can be unlocked using the TV. We bring the device to the television panel. Simultaneously press and hold the teletext keys for 10 seconds (usually they are red and blue).

If unsuccessful, turn off the power to the remote control (remove the batteries) and the TV. Then we turn them on again and try again.

If after using all the above mentioned manipulations the operation of the device is not restored, then contact your nearest service center for help, specialists will help you understand the situation.

Radio stations

Radio modems

GSM modems

Antennas

Power supplies and converters

Information

(495) 220-95-14

@mobilradio.ru

How to find out the TV code

To set up a universal remote control for your TV, it is advisable to know the three- or four-digit code of a specific model. You can find such codes either in the technical data sheet of the TV, or on the website of the equipment manufacturer, or in special reference tables. It’s called “Code for setting up the remote control.”

But how to set up the remote control for your TV if you couldn’t find the right model code for your model? For this purpose, each UPDU has an automatic configuration function with software code search. Simply press the desired combination of numbers, after which the auto-selection command will start.

What are ciphers used for?

Remote control devices provide programming functions. Thanks to this mode, you can reconfigure them.

Using codes for a universal remote control will allow you to synchronize equipment from different manufacturers.

Most brands have their own combination of numbers for activation. After its completion, you can use one device instead of two to perform different commands (adjusting the sound, turning the TV on and off, etc.).

Key points when buying a chandelier with remote control

Before purchasing an LED chandelier with a mobile remote control, you need to consider the following questions:

• First of all, check the type of electrical wiring in the room. For the type of chandeliers in question, the three-core type is ideal. It is possible to connect it to a two-wire one, but then the likelihood that the device will burn out becomes greater. To install the chandelier you only need to connect it to the switch.
• When choosing light bulbs, the best option is energy-saving, halogen, LED and other lamps. Unlike conventional incandescent lamps, they will last much longer, and their higher cost will soon be recouped through energy savings.
• Depending on the room where this lighting device will be located, parameters such as power and its dimensions are selected. The larger the area of ​​the room, accordingly, the greater the power and dimensions of the LED chandelier should be.

You can find chandeliers with LEDs made in China. This fact does not make them of lesser quality, since items made in China are not inferior to their counterparts made in Europe or America.

Chandelier functions

Instructions for setting up universal remote controls

The instructions say that the universal TV remote control will start working only after the power source is connected. Therefore, first insert the batteries into the appropriate slot. Some devices do not come with batteries and must be purchased separately.

Setting up a universal remote control for your TV begins with synchronization. Open your TV settings to select the appropriate mode. Main options: DVD, audio, TV, etc. To complete the connection process, press and hold the TV button for three seconds. Enter your equipment code in the appropriate box. To find out, you need to study the accompanying documentation in detail. We will consider this point in more detail below.

Automatic

To set up in auto mode, you will need to press the combination of four nines on the remote control panel for a couple of seconds, without removing your finger from the 9 key. When everything is done correctly, the TV will immediately deactivate. Then the automatic selection of TV channels will start. The whole process may take about 15 minutes. This method is used if the TV owner does not have a code for a universal remote control.

How to set up and connect a universal remote control to the TV? Let's go through the settings. For Supra: you need to turn on the TV, then point the remote control and hold the Power button for about six seconds. The diode should just light up. When the TV began to respond to an increase or decrease in sound, then the setting in auto mode was completed.

On the Huayu remote control, press Set and then immediately Power. This process must be done while adhering to the rule - the keys are not activated immediately, but with a slight time interval. Then the buttons are released and Power is pressed. You need to make sure that there is a volume scale on the TV screen. To exit the program, you need to click on Set a couple of times.

The third setting method, which is often used for universal remote controls. So, turn on the TV, then press and hold the TV button until the LED starts to light. Please note that some models may flicker. Then hold down Mute to activate the search. Once the process is complete, you need to press any button on the remote control to check if there is a response to the commands.

Manual

Now we will look at the second method, how to set up a universal remote control for your TV. You need to use a special code for your TV, entering it, you will need to follow the established procedure. So, for Supra, you need to point the remote control at the TV and immediately hold down Power, a window will pop up on the screen in which you will have to enter the code for your device. If the code is correct, the LED will blink a couple of times, you can release Power.

To activate the Huayu TV universal remote control, press Set and Power at once. After this, you need to wait until the LED starts flashing. A four-digit code is entered. When the diode goes out, you need to immediately click on Set. For Beeline, you need to activate the “TV” button and at the same moment hold down Setup and C. Upon completion of the installation, the device will blink a couple of times. This is a signal that you can release the keys. To check the device's functionality, increase the volume. In general, the process is quite simple, the main thing is to follow the sequence of actions. Remember that if the code has not been entered within 1 minute, the entire process will have to be repeated.

No code

Few people know how to set up a TV remote control without a code, but it’s really possible to do it. Follow the simple step-by-step instructions:

1. Take the remote control and turn on the TV.
2. Simultaneously press 2 keys on the remote control: “OK” and “TV”. They need to be held for several seconds. Hold them down until only the number keys light up.
3. Switch TV channels until the TV turns off. Disabling is a sign that the code was selected automatically.
4. To save the specified parameters, press the “TV” key.

Universal remote control codes

Regardless of what brand of equipment you use, codes are needed to set up a universal remote control. Without them, it is impossible to configure the equipment. Of course, you can use an alternative solution through automatic selection, which was already discussed earlier, but it is better to find the codes.

To avoid solving such problems after the fact, check such details before purchasing equipment. Using the universal remote control is extremely simple; just point it at the TV and then press the corresponding button.

Smartphones with universal remote control function

Mobile phones have a built-in remote control option. You can find out the availability of the function in the technical characteristics of the mobile phone. To enable, download the appropriate application. Select the program in the Play Market or App Store. Read user reviews before downloading. Download the widget to your mobile and install. After that, select a list of equipment. Now determine the pairing method via Wi-Fi or Bluetooth.

Sources used:

• https://iptvmaster.ru/nastroyka-universalnogo-pulta-dlya-televizora/
• https://it-increment.ru/instrukcii/universalnyj-pult-kak-nastroit.html
• https://smarts-iptv.com/kak-nastroit-universalnyy-pult-huayu.html

Brands

• A
• Ab ipbox,

Absolute,

Acer, Actia, Acv, Adb, Aeg, Aeronik, Aerotek, Agfa, Aic, Air-green, Airties, Airtone, Aiwa, Akado, Akai, Akira, Alaska, Alex bauman, Alfa gold, Alpine, Amcv, Amino/stream TV , Amstar, An-motors, Android, Aoc, Apollo, Apple, Aragon, Arcam, Arion, Artel, Asano, Aston, Asus, Atlanfa, Atlanta, Attitude, Aun, Aura, Aux, Ave, Averdigi, Avermedia, Avest, Azur , B Bang & olufsen, Bar s2 hd, Bbk, Behold, Beko, Belson, Bene, Benq, Bigsat, Bigstar, Bimatek, Blaupunkt, Blauren, Booox, Bork, Bose, Brand, Braun, Bravis, C Came, Cameron, Canon , Casio, Caska, Centek, Challenger, Changer (changer), Changhong, Chigo, Chunghop, Clarion, Compro, Conrac, Continent, Cortland, Cosmosat, Creative, Crown, Cyfron, D Daewoo, Dahatsu, Daihatsu, Daikin, Dali, Dantex , Dartland, Defender, Dell, Delonghi, Delta systems, Denn, Denon, Desay, Dex, Dexp, Dialog, Digital, Digma, Distar, Divisat, Dns, Doffler, Dr.hd, Dreamsky, Dune, Dvico, Dvtech, Dynex, E Echostar, Econ, Edifier, Eiki, Elco, Elect, Electra, Electrolux, Electron, Electronics, Elekta, Elenberg, Elgreen, Eltex, Envizen, Eonon, Eplutus, Epson, Ergo, Erisson, Escada, Euromax, Eurosat, Eurosky, Eurostar , Euston, Evgo, Evolution, Explay, F Favorit, First, Fisher, Formuler, Frisby, Fujifilm, Fujitsu, Fujitsu / fujitsu-siemens, Funai, Fusion, G Galatec, Galaxy innovation (gi), Geepas, General, General climate, General satellite, Genius, Giraffe, Glenrich, Globalteq, Globo, Gmini, Godigital, Golden interstar, Golden media, Goldmaster, Gold star, Gorenje, Grandtec, Gree, Green, Grundig, H Harman/kardon, Harper, Hartens, Hck, HDbox , Hd stream generator, Hec, Helix, Himedia, Hisense, Histar, Hitachi, Hivion, Honda, Horizont, Hotcake, Hotpoint-ariston, Hpc, Huavee, Huayu, Humax, Hyundai, Igc, Ihandy, Ihome, Imaqliq , Infiniti, Infocus, Intercross, Intro, Invin, Iomega, Irbis, Ivolga virtus, Izumi, J Jbl, Jeja, Jeutech, , Jvc, K Kaskad, Kentatsu, Kenwood, Keydo, Kii pro, Kitano, Kivi, Komatsu, Konka, Korting, Kraft, Kramer, Kreolz, Kronmark, Ktc, L Leben, Leber, Led 86+, Legend, Lenovo, Lentel, Lessar, , Lgen, Locus, Loewe, Loview, Lumax, Lumus, M Marantz, Maximus, Maxone, Mdi , Mdv, Mdvr, Medion, Meredian, Microdigital, Microlab, Micromax, Midea, Miro, Mitsubishi, Miyota, , Motorola, Mystery, N Nakatomi, Nash, Nec, Neo, Neoclima, Neoteck, Nero, Nesons, Netbynet, Newstar, Nice , Nissan, Nokia, Noontec, Nordstar, Nova, Novex, Novis, Nuvision, O Okeah (ocean), Olto, Olympus gold, Onext, Onida, Oniks, Onkyo, Onlime, Openbox, Openmax, Opentech, Opticum, Optimus, Optoma, Orfey, Oriel, Orion, Orson, Orton, P Panstar, Parasound, Patix digital, Perfeo, Phantom, Philco, Philips, Pioneer, Polar, Polaris, Polarline, Premiera, Prestigio, Prima, Prime, Progressive, Prology, Proscan, QR Redbox , Redmond, Reflect, Rekord (record), Rexant, Rikor, Rising, Ritmix, Rix, Roadstar, Roda, Rolsen, Roverscan, Rovex, Royal, Royal clima, Rubin (ruby), S Sakata, Samsung, Sansui, Sanyo, Sast , Sat-integral, Satpro, Saturn, Scarlett, Schaub lorenz, Schneider, Scishion, Scoole, Seagate, Seg, Selecline, Selenga, Seven sky, Sharp, Sherwood, Shinco, Shinge, Shivaki, Siemens, Siesta, Signal ( signal), Sim-sim, Sitronics, Skyline, Skymaster, Skytech, Sky vision, Skyway, Skyworth, Smart, Sokol (falcon), Sony, Soundmax, Splash vision, Start, Starwind, Stingray, Straus, Strong, Subini, Super, Super general, Supra, Suzuki, Sven, Systemair, T Tcl, Teac, Technics, Techno, Teckton, Tekson, Tel-ant, Telefunken, Tesler, Texet, Thomson, Tiger, Timberk, Top box, Topdevice, Topfield, Toshiba, Trony , Tvip, Tvjet, Tvstar, Tvt (skyworth), UV Vds, Vector, Vekta, Velas, Velodyne, Veris, Vermax, Vertex, Vestel, Vico clima, Vidstar, Viewsonic, Vitek, Vityaz (knight), Vivitek, , V, W , West, Western digital, Westvision, Whirlpool, Wimax, World, World vision, X Xpx, Xsat, Y Yuno, Yuxing, Z Zelenaya.net (green.net), Zifra, Zifro, B D for NTV+, for gates and barriers, for different dvb-t2 set-top boxes, for different DVRs, for different air conditioners, for different receivers, N P R T tricolor, U E 3

Universal remote control HUAYU DVB-T2+TV

Perhaps this remote control model is not the only one on the market, but it is the most popular and is sold in most specialized stores that sell antenna equipment. This remote control is programmed with control codes for the vast majority of TV models and digital set-top boxes. The remote control is not teachable, that is, it does not require a donor remote control for configuration. If the original remote control for the set-top box is broken or lost, then it makes sense to purchase just such a universal remote control as a replacement instead of the original remote control.

The HUAYU remote has all the standard buttons for full control of a digital set-top box and four buttons for controlling the TV: on/off, switching video input and volume control

Please note that some models of CRT TVs do not have a power button, but channel switching buttons. In this case, the universal remote control will not be able to turn on the TV.

List of code values

The table shows the most popular brands of TVs and the code values ​​that are suitable for them.

Determining TV codes

In order to code the corresponding remote control, you will need to correctly identify the code. As a rule, to do this you need to have the following information:

1. First of all, it is necessary to clarify the manufacturer who produced the television device used.
2. The specific model is also determined, namely all the values ​​​​and a special number (this is present on the device itself).
3. Separately, the firmware version should be highlighted, as well as the immediate year of manufacture and assembly of the equipment.

All this information is necessary in order to correctly search for the encoding for subsequent device management. As a rule, all old installation options do not have modern firmware or operating systems, which is why combination and subsequent configuration are somewhat more difficult to perform here than with new modern models.

Possible problems

It happens that none of the options indicated in the table are suitable, and the remote control cannot be configured.

In such cases, TV experts advise using auto-tuning or seeking advice from professionals.

Difficulties may also arise due to the fact that the remote control model does not fit a specific TV. Therefore, before purchasing a device, you need to check the list of relevant brands and read the technical specifications. In addition, a weak signal may occur due to dead batteries. Before use, it is important to ensure that all devices are working properly.

User instructions for TV set-top boxes, TV remote controls

Remote control HUAYU DVB-T2+2 ver.2018-2 instructions

User Manual: Universal remote control for set-top box HUAYU DVB T2 +2 (ver. 2018-2 B0063950)

Home > Instructions

Instructions for using the remote control

remote control HUAYU RM-36E+

Dear customer, thank you for choosing a product from our company. We hope it will make your life more convenient. Before use, please read these instructions to help you use the product correctly.

The RM-36E+ multi-function remote control is the latest product of our company. It has great capabilities, consumes little power, is fully functional, beautifully shaped and of good quality. It integrates more than 1000 remote controls for TV control. In the RM-36E+ multifunctional remote control, the installation code can be quickly entered manually and configured by quick scanning (convenient in cases where the brand of the remote control is unknown).

Installing the battery.

Open the battery compartment cover and insert two new “AAA” batteries (UM-4, AAA, R03) in the same manner.

Insert new batteries, observing polarity.

Do not mix old batteries with new batteries or batteries of different types.

If the remote control will not be used for a long time, it is better to remove the batteries, as drops of electrolyte can damage the remote control.

Setting by brand and codes.

1. Find the 3-digit code in the “Code List” for the appropriate brand. If there is more than one group of codes, select the first one. If the remote control does not work, select the second one and so on until the remote control works. If the device is not in the “List of codes” (“Code”), use the “Manual code search” function.

2. Press and hold the “SET” button, then press the POWER button and release both buttons. The LED indicator should light up, indicating that you have entered programming mode. If the indicator does not light up, repeat all steps from the beginning.

3. Enter the 3-digit code you found. When entering the first and second digits, the LED indicator should blink once. After entering the third last digit, the LED indicator should go out.

4. After entering the third last digit, the LED indicator should go off, which means that the code setting is complete. You can use the remote control to operate the machine.

NOTE: When setting a code, the interval between button presses cannot exceed 15 seconds.

Manual code search.

Turn on the TV you will be working with.

On the universal remote, press and hold the “SET” button, then simultaneously press the POWER button.

The LED indicator will remain on continuously. Point the remote control at the receiving part of your device.

Press and release the VOL + button. At this moment, the universal remote control will emit a series of volume increase pulses. Do this until your device begins to respond to commands from the remote control.

When the TV lights up the volume control bar, press the SET button to stop manual search mode.

Check that your device is functioning correctly. If not all buttons on the universal remote control perform their functions or work incorrectly, continue manual search. Repeat steps 2-6 until you achieve the desired result.

The meaning of the three-digit code that suits you can be viewed and remembered (see “Viewing codes”).

The next time the code is accidentally reset, you will no longer use this manual search mode, but will immediately enter the code you need. (See “Setting up by brand and codes.”)

To view the three-digit code, press and hold SET and 1 (2, 3). The number of indicator flashes will correspond to the first digit of the code. SET and 2nd digit, SET and 3rd digit. The number 0 is expressed by the absence of glow.

Summarizing

The MTS company is a relatively young “player” in the market for providing satellite television services, however, the professionalism of its employees, the quality of television broadcasting and the provider’s pricing policy have allowed the organization to take a leading position in terms of the number of subscribers.

While subscribers rarely have complaints about the quality of services provided, issues related to television setup and equipment synchronization are not isolated. Experts recommend that you study the operating instructions for the equipment in detail before connecting it directly, and the recommendations contained in the article will help you avoid common mistakes made during the process of setting up television broadcasting from MTS. As a backup option, the user always has a call to the provider’s service center in order to receive professional advice.