Overview of setting up and connecting DVB-T set-top boxes D-Color

The D-Color company is probably one of the 3-4 most popular manufacturers of DVB-T set-top boxes in our country. Considering the fact that to date the number of digital television equipment sold has exceeded 2 million sets, it can be noted that there are plenty of owners of D-Color receivers in our country and this number will only grow.

Currently, there are 16 models of dcolor consoles available to everyone. Regardless of the year of manufacture, any of the presented models works with the DVB-T and DVB-T2 standards, and therefore can receive up to 20 digital channels. Today we will try to give an overview of instructions for all models of color consoles and will try to show the correct process for connecting them to a TV.

Comparison of characteristics of all models of digital set-top boxes from D-Color

Actually, comparing receiver models with each other, in some respects, does not make sense. The only difference will be the adaptation of set-top boxes to work with certain types of broadcast transmission to a TV. In older tuners, you can only connect via an RSA connector, but in modern ones, HDMI is already built in. Otherwise, these receivers cope well with their tasks.

* The DC 1002 HD Mini model differs in size from all other models, which is why it has this name.

Connecting D-Color models to a TV using the example of dc1302hd and dc1002hd

Below we will try to give a general diagram for connecting all models of color set-top boxes to a TV. As an illustrative example, let’s take the 2 models presented above. However, the process will be identical for the entire list of receivers in the table, even for the dc1301hd , dc1501hd and the dc1002hd mini .

The main and determining point when connecting will be the choice of the appropriate connector. It is selected depending on the presence of a particular connector on the TV.

1. HDMI. The most preferred connection option. If available, it is chosen first, because this input is capable of transmitting a higher-quality picture to the screen and will also last much longer than other wires.
2. RSA. Usually comes with a set-top box. Presented in the form of colored wires with 3 inputs on both sides (there are also options 3-1 and 2-2). Available on 70%-80% of TVs, but less durable than the previous option.
3. Using adapters. In some cases, it happens that the TV cannot be connected directly for a number of reasons. In this case, it is worth using adapters and signal converters that allow you to combine connectors.

1. Scart-RSA. On older TV models, tulips are often missing. In this case, the device will most likely have a SCART input. Then the only option to connect to the D-Color set-top box is to use a special adapter.
2. RSA-HDMI. Is the exception rather than the rule. You can combine these 2 connectors only in case of urgent need, for example, if one of the inputs on the TV is faulty. The fact is that the conversion of this type of signal can be distorted and it is not always possible to adjust the picture to a view that is convenient for viewing.

During the connection process, it is advisable to make sure in advance that the antenna is selected correctly and whether it needs to be replaced. It would be a good idea to check that the grounding is in good working order and that there are no voltage surges.

In practice, due to power surges, some types of set-top boxes may fail. This is not only common on the D Color models, but is observed everywhere. If you are aware of such problems, it would be a good idea to connect the TV and set-top box to an uninterruptible power supply.

DColor DC1002HD receiver reviews

Danil

Pros : The recording quality is excellent. You can set the recording time of several programs. Easy to connect and configure. Several types of connection to the TV. The settings are saved for a long time after the device is turned off from the network. Disadvantages : When playing some video from flash, there is no sound, but the supported audio speed is up to 384 Kbps. Most films have a sound speed of 448 kbps, including DVDs. Maybe they will fix it with the new firmware. Comment : Not a bad device, connect it and look. When turned on, a menu opens with a channel search. After performing a search, the found channels are saved.

Matvey

Advantages : Plays media like a Blu-ray player, supports more codecs. Disadvantages : After turning off and on the power supply, my receiver D Color ds1002 goes into working condition, even if it was in standby mode before. In standby mode, the signal from the antenna does not pass to the output jack. The recording on the flash drive fails, and even when the receiver is switched to standby mode. Replacing the flash drive and formatting from FAT to NTFS did not help. Comment : The device is good, despite its shortcomings.

• Review of the budget terrestrial DVB-T2 receiver World Vision T34

Lena

Advantages : Beautiful appearance, everything is in Russian. Disadvantages : Didn't find any. Comment : Buy a set-top box d color dc1002hd dvb t2, my brother advised me, I doubted it for a long time, but took it. I don't regret it one bit. Great model.

Ilya

Advantages : The picture, even on an ancient tube TV, was simply transformed. Buttons on the front panel. Disadvantages : On my d color dc1002hd receiver the picture freezes, although I haven’t seen this in reading reviews on them. Doesn't play some files. Comment : Average device.

The D-Color company is probably one of the 3-4 most popular manufacturers of DVB-T set-top boxes in our country. Considering the fact that to date the number of digital television equipment sold has exceeded 2 million sets, it can be noted that there are plenty of owners of D-Color receivers in our country and this number will only grow.

Currently, there are 16 models of dcolor consoles available to everyone. Regardless of the year of manufacture, any of the presented models works with the DVB-T and DVB-T2 standards, and therefore can receive up to 20 digital channels. Today we will try to give an overview of instructions for all models of color consoles and will try to show the correct process for connecting them to a TV.

Step-by-step channel setup on D Color

In order to check the correct connection, you will need to launch the set-top box on the TV for the first time:

1. In the TV menu you need to select the display mode in which the set-top box was connected. For example, if you turned on everything via RSA, then you should go to AV.
2. After this, you can start the device itself from the remote control.
3. The basic settings welcome window will open. You need to set your language in it and go to “Search for Programs”.

4. The receiver will independently begin scanning the digital broadcast reception frequencies known to it and save the list of programs upon completion.

In this case, the number of channels will be determined by the level and strength of the signal from the antenna. If it is not enough, then the errors of the antenna should be corrected first.

If the set-top box does not work

Owners of DColor set-top boxes often have a lot of questions when the device stops working stably or refuses to find channels. In this case, it is difficult to answer in detail every owner of these types of receivers. Therefore, we have compiled a basic list of possible errors and the most obvious solutions to them.

No signal / Can't find channels

1. Search for channels manually. Make sure there is a reception signal.
2. If it is completely absent, then check the antenna. The cable may fail or oxide may form on the signal amplifier. In this case, it is worth disassembling it and cleaning it.

Doesn't work / No picture or sound

1. In 80% of cases, the cable connecting to the TV is to blame. For example, RSA connectors wear out a lot with frequent use and, as a rule, quickly fail. Only replacement will help.
2. It is also worth checking the power cable of the set-top box. Unplug it from the outlet and visually inspect for exposed wires.
3. If a number of functions of the set-top box do not work, then try resetting to factory settings. To do this, you must select the appropriate item in the system menu. If the set-top box requires you to enter a password, it is usually “ 000000“

The remote doesn't work

1. The coverage area of ​​the dcolor remote control is regulated by the manufacturer and is 5 m. Make sure you are not too far from the receiver.
2. Change the batteries.
3. If all else fails, then the remote control may fail.

Channels are rearranged independently or are not saved / the set-top box reboots itself

In this case, the device firmware is to blame and needs to be updated. The new version can be found on the Internet. It is recorded on a flash drive and inserted into the console. Then you should go to the menu and click on software update.

Characteristics of the digital TV receiver DVBT2 DColor DC1002HD

• Playback of digital video (FULLHD 1920*1080) and STEREO quality audio;
• High sensitivity tuner NM 120;
• Modern chipset and demodulator of the latest generation MStar 7802;
• Play AVI, MPEG, MKV, DivX, MP4, JEPG, MP3, WAV and USB PVR via USB2.0
• easy-to-use on-screen menu;
• storing up to 999 channels in memory;
• editing the list of programs (adding favorite programs, sorting and deleting);

Options

• Input signal format: DVB-T2 (reception of open channels)
• Received frequency range: 174-862 MHz.
• Video format: MPEG4 AVC H.264 SD/HD
• Audio format: MPEG-1 Layer I/II, MPEG-2 Layer II, AAC
• Video resolution: 576i, 576p, 720p, 1080i, 1080p
• Screen format: 16:9, 4:3
• Stream bandwidth: 6 / 7 / 8 MHz.
• Accepted modulation types: QPSK, QAM-16, QAM-64 for COFDM 2K/8K
• Allowable bit rate: Video up to 15 Mbit/sec, Audio up to 384 Kbit/sec.
• Sound: 2 channels
• Number of channels in memory: 999
• Display teletext and subtitles
• TV guide (program overview) EPG
• Shift in TV viewing time (Timeshift)
• Record TV programs on the fly to a USB device
• Record TV programs using a timer to a USB device

Setting functions

• Multilingual menu.
• Automatic time synchronization
• Setting the time zone
• TV lock
• Automatic and manual program search
• Manual search for programs by channel number or frequency
• Firmware update via USB

Timers

• How to connect a D-color set-top box to a TV to receive digital TV

• Types of timers: power on, recording to a USB device
• Trigger frequency: Once, Daily.

Connectors

• Antenna input,
• Antenna output,
• RCA,
• HDMI
• USB (for playback, recording and software updates),

Nutrition

• Supply voltage: 110 - 240 VAC
• Power consumption: 8W.

The kit includes instructions with a detailed description of the console in Russian. The firmware is constantly updated on the manufacturer's website. If necessary, you can download DColor DC1002HD firmware.

The price for the DColorDC1002HD set-top box currently ranges from 1000 thousand to 1.5 thousand rubles.

Watch the video on how to configure the console:

Reviews for D-Color

Regarding our experience in communicating with owners of D-Color set-top boxes, we can draw up a rough picture of people’s opinions on the devices of this company.

1. Tuner owners always have a number of questions regarding the availability of proper instructions for a particular model. You won’t find these on the Internet, and the official website is often inoperable.
2. There are no complaints regarding the company's pricing policy. Set-top boxes cost around 1000 rubles and even the latest models will be affordable for most.
3. Technically, there are some difficulties with finding programs. In most cases, when connecting digital television, subscribers do not see the need to replace the antenna. And in most cases this is correct, but there are exceptions.
4. As a main advantage for dcolor consoles, we can note their adaptation to a large number of televisions. This is primarily revealed by the presence of more connectors for connection.

Otherwise, these receivers are not very different from similar DVB-T devices.

The D-Color company is probably one of the 3-4 most popular manufacturers of DVB-T set-top boxes in our country. Considering the fact that to date the number of digital television equipment sold has exceeded 2 million sets, it can be noted that there are plenty of owners of D-Color receivers in our country and this number will only grow.

Currently, there are 16 models of dcolor consoles available to everyone. Regardless of the year of manufacture, any of the presented models works with the DVB-T and DVB-T2 standards, and therefore can receive up to 20 digital channels. Today we will try to give an overview of instructions for all models of color consoles and will try to show the correct process for connecting them to a TV.

Reviews for analogues:

Digital television receiver DColor DC1301HD Digital television receiver DColor DC1201HD Digital television receiver DVB-T2 HYUNDAI H-DVB03T2 Digital television receiver Cascade DVB-T2 VA2101 HD Digital television receiver Remo TVjet RE 820HDT2

Receiver D Color DC1002HD

Digital broadcast set-top box DColorDC1002HD for receiving digital signals of the DVB T and DVBT2 standard. This is an improved version of the DColorDC1001HD receiver. The receiver has replaced the Mstar processor with a 7802 processor, and also installed a tuner with improved sensitivity NM120. The installation of a new processor made it possible to reduce the response time to user actions, which, together with the best qualities of the previous model, made it possible to obtain an excellent receiver that meets all technological standards. The presence of an LED display displaying time and technical information makes it even more convenient. Rostest certificate received. High-quality components, 2-year warranty.

Comparison of characteristics of all models of digital set-top boxes from D-Color

Actually, comparing receiver models with each other, in some respects, does not make sense. The only difference will be the adaptation of set-top boxes to work with certain types of broadcast transmission to a TV. In older tuners, you can only connect via an RSA connector, but in modern ones, HDMI is already built in. Otherwise, these receivers cope well with their tasks.

Connecting D-Color models to a TV using the example of dc1302hd and dc1002hd

Below we will try to give a general diagram for connecting all models of color set-top boxes to a TV. As an illustrative example, let’s take the 2 models presented above. However, the process will be identical for the entire list of receivers in the table, even for the dc1301hd , dc1501hd and the dc1002hd mini .

The main and determining point when connecting will be the choice of the appropriate connector. It is selected depending on the presence of a particular connector on the TV.

1. HDMI. The most preferred connection option. If available, it is chosen first, because this input is capable of transmitting a higher-quality picture to the screen and will also last much longer than other wires.
2. RSA. Usually comes with a set-top box. Presented in the form of colored wires with 3 inputs on both sides (there are also options 3-1 and 2-2). Available on 70%-80% of TVs, but less durable than the previous option.
3. Using adapters. In some cases, it happens that the TV cannot be connected directly for a number of reasons. In this case, it is worth using adapters and signal converters that allow you to combine connectors.

1. Scart-RSA. On older TV models, tulips are often missing. In this case, the device will most likely have a SCART input. Then the only option to connect to the D-Color set-top box is to use a special adapter.
2. RSA-HDMI. Is the exception rather than the rule. You can combine these 2 connectors only in case of urgent need, for example, if one of the inputs on the TV is faulty. The fact is that the conversion of this type of signal can be distorted and it is not always possible to adjust the picture to a view that is convenient for viewing.

During the connection process, it is advisable to make sure in advance that the antenna is selected correctly and whether it needs to be replaced. It would be a good idea to check that the grounding is in good working order and that there are no voltage surges.

In practice, due to power surges, some types of set-top boxes may fail. This is not only common on the D Color models, but is observed everywhere. If you are aware of such problems, it would be a good idea to connect the TV and set-top box to an uninterruptible power supply.

Overview of setting up and connecting DVB-T set-top boxes D-Color

The D-Color company is probably one of the 3-4 most popular manufacturers of DVB-T set-top boxes in our country.
Considering the fact that to date the number of digital television equipment sold has exceeded 2 million sets, it can be noted that there are plenty of owners of D-Color receivers in our country and this number will only grow. Currently, there are 16 models of dcolor consoles available to everyone. Regardless of the year of manufacture, any of the presented models works with the DVB-T and DVB-T2 standards, and therefore can receive up to 20 digital channels. Today we will try to give an overview of instructions for all models of color consoles and will try to show the correct process for connecting them to a TV.

Step-by-step channel setup on D Color

In order to check the correct connection, you will need to launch the set-top box on the TV for the first time:

1. In the TV menu you need to select the display mode in which the set-top box was connected. For example, if you turned on everything via RSA, then you should go to AV.
2. After this, you can start the device itself from the remote control.
3. The basic settings welcome window will open. You need to set your language in it and go to “Search for Programs”.
4. The receiver will independently begin scanning the digital broadcast reception frequencies known to it and save the list of programs upon completion.

In this case, the number of channels will be determined by the level and strength of the signal from the antenna. If it is not enough, then the errors of the antenna should be corrected first.

In any case, if you were unable to find 20 channels, you can try to retune the channels manually. In this way, you will purposefully set the set-top box with the frequency data that it will need to scan. We will now tell you how to do this:

1. Let's go to the interactive map of CETV. We find on it the area in which you live and look at the television tower closest to your place of residence. Click on it and write down the parameters for RTRS-1 and RTRS-2. In particular, we are interested in channel numbers.
2. Go to the D-Color console menu and look for the program search section there. We need a “Manual Search”. Click OK and first indicate the first frequency channel that you recorded earlier. After the search is completed, we do the same for the second one.

When searching manually, you should carefully monitor the quality. If the frequency is selected correctly and the antenna is operational, it should change as in the screenshot below.

If your antenna has a signal amplifier, then you should turn it on before searching. To do this, you need to find “Antenna power” in the program search menu and switch it to “on” mode.

D-Color 1002HD mini - DVB-T2 receiver review.

In this article we will look at the configuration and configuration of the D-Color 1002HD mini digital television receiver.

The tuner is designed to receive signals in the DVB-T2 standard through a conventional UHF antenna.

The model uses an MSD 7816 processor, and the NM 120 tuner is responsible for receiving digital signals.

There is also a built-in HD media player for playing most of the most common video formats, and it is possible to record television broadcasts.

The outputs include an HDMI output for connecting to modern TVs and a composite (bells) output for connecting to older models.

You can find the receiver in stores in a box like this:

The package includes the receiver itself, a full-function remote control, 2 pinky batteries, a low-frequency cable for connecting the set-top box to the TV, a network cable and an instruction manual with a warranty card inside.

As for the console itself, its body is metal with a plastic front panel.

It contains a USB port for a flash drive or hard drive, an indicator on which displays the clock when it is off and the operating mode or channel when it is on.

There are also two channel switching buttons and an on/off button with an LED above it.

When the set-top box is turned on, it lights up green, and when it’s off, it lights up red.

On the reverse side of the receiver there is an antenna input and output, an HDMI port, RCA connection connectors and a network cable.

Now let's move on to the software part of the tuner, get acquainted with the menu and quickly configure channels.

To do this, connect our set-top box to the TV using a cable and turn it on by pressing the power button on the remote control or the receiver itself.

When turned on, a small preliminary window appears with language settings, country selection and automatic channel search.

During auto-search, the set-top box will begin scanning the entire range available to it in search of channels.

All navigation is carried out using the buttons indicated at the bottom of the menu itself.

Press the “Exit” or “Menu” button and get to the main menu of the set-top box.

It contains 7 sub-items. They are standard for most digital receivers, so we will not consider them all.

We are only interested in the third item “Search for channels”.

This item contains the same “Auto search” as in the start menu and “Manual search”.

We go down to the second sub-item and click “OK”. A small manual search menu opens.

In it we can set the “Frequency Channel” on which the broadcast is carried out in your region.

The values ​​of frequency channels available specifically for your region can be viewed on the RTRS.RF website.

If there are several of them, then first add channels from one frequency channel, and then repeat all the steps for the other.

Go to this line and use the left and right arrows to set the required value.

Click “OK” and after a few seconds a list of video channels, as well as digital radio frequencies available in this range, will appear on the screen.

Click “Exit”, the found channels are saved. Now you can start adding other channels from the next frequency channel (frequency range), if available in your locality.

Video review can be viewed at the link

Twitter

Like

• < Back
• Forward >

If the set-top box does not work

Owners of DColor set-top boxes often have a lot of questions when the device stops working stably or refuses to find channels. In this case, it is difficult to answer in detail every owner of these types of receivers. Therefore, we have compiled a basic list of possible errors and the most obvious solutions to them.

No signal / Can't find channels

1. Search for channels manually. Make sure there is a reception signal.
2. If it is completely absent, then check the antenna. The cable may fail or oxide may form on the signal amplifier. In this case, it is worth disassembling it and cleaning it.

Doesn't work / No picture or sound