Receiver firmware

• Technique
• Equipment catalog
• HD receivers
• Terrestrial HD receivers
• World Vision T62A

• Photos (0)
• Video (0)

I want to buy 0

I am the owner of 6

• Description
• Review
• Reviews (0)
• Characteristics
• Comparison
• Firmware/Manuals

Buy “World Vision T62A” in Ukraine and Russia

* For the most current prices for goods, see the online store website. Delivery cost is not taken into account ** If the cost is indicated as 0 / 1, this is a pre-order or leftover model for order. Check the price with the seller

World Vision T62A LAN is a modern digital terrestrial DVB-T2.

Without a doubt, the new modernization of the television receiver has incorporated the best software and hardware developments into the device.
As for the software, already out of the box World Vision T62A LAN has debugged software.

Yes, at the end of the article you can download the latest software.

Of course, if such a desire arises, the instructions from the device are attached and are waiting for download. The main, or even the main, feature is the presence of a LAN port connector.

And this is 100 Mbit/s for a wired Internet connection. This feature will increase the stability of Internet content playback. And this is already present in the software.

The Vision T62A LAN set-top box is designed to receive digital television in terrestrial DVB-T/T2 and cable DVB-C television standards. Vision T62A LAN is based on the modern high-performance GX3235S processor.

There is support for the AC3 audio codec. An individual approach to the development of Vision T62A LAN software has added the ability to receive cable television in the DVB-C standard.

There is support for wireless Wi-Fi adapters based on the Ralink RT5370 and Mediatek MT7601 chip. When connected to the Internet, information and multimedia capabilities through applications are significantly expanded. Like the weather, RSS Reading, Local and Cloud IPTV player, Megogo.

The device body is made of metal.

On the front panel of World Vision T62A LAN there are receiver control buttons, a digital four-segment display and a USB port.

On the back panel of the Vision T62A LAN there is a place for an antenna input and an ethernet network port. There is also a digital audio and video output HDMI, analog audio video output 3-RCA. And of course there is a socket for connecting an external power supply 5V 1.2A.

• Step-by-step instructions for connecting and setting up dvb-t2 digital set-top boxes world vision

The built-in network port allows you to connect Vision T62A LAN to the Internet, router, using a twisted pair network cable or a ready-made patch cord. And this will allow you to have high-speed access to the Internet without delays.

REMINDER.

A network connection with a cable is much faster and more reliable than WI-FI connections, which is very critical when viewing IPTV streaming services.

The new World Vision T62A LAN firmware is optimized for the operation of IPTV channels and IPTV lists; the option to automatically start IPTV channels when loading the receiver and turning it on is now available. This is very useful for those who want to use the Vision T62A LAN as an IPTV player, which the Vision T62A LAN does very well.

Loading IPTV channels into Vision T62A LAN can be done from a USB drive (having a ready-made IPTV channel file). Also via a URL link (self-updating IPTV sheets are used).

Work with IPTV lists is carried out in the popular and publicly available M3U format. The Vision T62A LAN firmware also includes video plugins for popular video services YouTube and Megogo.

Main characteristics.

Processor - GX3235S OZP-DDRⅡ 64MB OZP-4MB Resolution - 576i, 576p, 720p, 1080i, 1080p (50Hz) File formats - MPEG-1, MPEG-2, MPEG-4, H.264, M-JPEG, AVI, MPG , MP4, TS, TRP, TP, MOV, MKV, VOB, DAT, XVID, M2TS Audio codecs - AC3/Dolby Digital, MPEG-1 Layer 1.2 PCM/HE-AAC V1.0

Weather, RSS, IPTV player, Megogo USB -Wi-FI Ralink RT5370, Mediatek MT7601

Dimensions (mm) 148x90x30

• Dvb set-top box lumax

Files:

Official software 09/12/2019 (3.4 MB): https://cloud.mail.ru/public/5tGc/5p69rmwjgUser instructions (2.4 MB): https://cloud.mail.ru/public/E1MQ/ zotXwWGvg

Verdict:

The very name of the World Vision brand immediately a priori determines the quality of the product and its official and reliable guarantee. World Vision T62A LAN is truly a premium device in the T2 receiver segment, providing maximum reliability and ease of use.

Firmware for World Vision tuners

A software update is necessary in the following cases:

1. When the set-top box starts to work inadequately: reboot, freeze, or refuse to connect to the TV.
2. When will a new, stable version of the software be released?

To update you need:

1. Download the latest version of the set-top box software from the official website. The firmware format will be .bin.
2. Write the file to a flash drive with the Fat32 file system.
3. Insert the USB drive into the console and go to the menu.
4. In the “System” section, select “Software Update”.
5. Then update via USB.
6. Specify the path to the file and click update.

If the software file meets the hardware requirements, then the firmware will take 10-20 minutes. When finished, the device will reboot.

World Vision Errors

During the operation of the site, we have accumulated a lot of questions from subscribers regarding World Vision set-top boxes. For some topics we will try to answer and provide possible solutions to problems.

• Connecting and setting up the Selenga digital set-top box to the TV

The set-top box does not search for channels / finds less than 20

1. Try searching manually.
2. Make sure you select the correct antenna. If the distance to the TV tower in your region is more than 10 km, then you will need an outdoor antenna with a signal amplifier.
3. Check the antenna cable for integrity.

The device does not connect to the TV

1. There may be problems due to old software. It needs to be updated.
2. Check the cable connecting to the TV. In 30% of cases the culprit is just a wire.

The console reboots or freezes

1. Update your software.
2. Reset to factory settings.

How to set up a learning remote

In total, the universal remote control has 4 programmable buttons: TV Power, Vol+\-, AV. To program them, you must press the OK and 0 buttons simultaneously, the red light should light up. After this, place another remote control opposite the student and press the button on the second one that you would like to program. After that, on the original remote control, press and hold the button that you would like to transfer. It is necessary to hold it until the remote control is not trained, the diode blinks 2 times. At this point the learning process can be considered complete.

Search and configure 20 digital channels on World Vision set-top boxes

When you connect any of the World Vision set-top boxes for the first time, a special welcome message should appear on the TV, in which you will be prompted to quickly set up the device. In any case, if the antenna selection was made correctly, the tuner will be able to independently configure all available channels. To do this you need:

1. Go to the device menu by pressing the corresponding button on the remote control.
2. Press the “Menu” button and go to the search section. Specify in the DVB-T2 range item. If the antenna has a signal amplifier, then also switch the power to “on”.
3. Select “Auto search” and click “OK”.
4. The set-top box will search across all available frequency ranges. The search will continue for 5-10 minutes. During this time, the device will save the entire available channel list and save the settings when finished.

The auto-search function is very convenient in cases where there is a stable signal and the antenna itself is well-tuned and is capable of receiving a digital signal without problems.

Manual search

If there are problems with the signal strength or the device cannot detect the required number of channels for no apparent reason, then you should repeat the search procedure in manual mode. The sequence of actions is as follows:

1. Go to the console menu, to the search section.
2. Select “Manual search” there and press “OK” on the remote control.
3. After that, go to the Internet and open the interactive map of CETV. We indicate your area of ​​residence on it and write down the parameters of the television tower closest to you. We will be interested in the channel number for RTRS 1 and RTRS 2.
4. In the set-top box menu, first indicate the number of the first channel from the card. At the same time, we check that the power and quality of the signal changes from 0% to some value. In this case, it is not necessary to have 100%. In some areas of residence, 60%, 70%, etc. is enough for normal broadcasting...
5. Click “OK”. The search will find available TV channels and radio.

What can he do?

• Reception of fixed T2 channels in good quality. This is why I bought it (for the dacha).
• Media player. Play music, videos, pictures from a flash drive.
• Weather forecast (from the Internet).
• Reading rss feeds. I added news channels to myself, and now I have the latest news right on my TV.
• Mail. Built-in gmail service. We watch mail on TV.
• Youtube. Built-in application of the most popular video hosting. It works great, it’s fast and doesn’t slow down, it cuts out ads, but... There’s one thing - there’s no way to log into your account to monitor your subscriptions. Search only.
• IPTV. For those who don’t know what it is, iptv makes it possible to load any channel in the world into your set-top box and watch it without problems. I used to use these playlists, it was all free, but it was a little buggy (just a little). I thought the problem was in the tuner itself, poor reception, etc. but then I connected to the service from edem.tv for 1$\month. and everything works great.

Characteristics of World Vision digital set-top box models

*The table contains blank data in the cells with price and DVB-T2 tuner model. In the case of price, the reason is that not all consoles are still on sale and are at the testing stage or have been completely discontinued. In the tuner model data, we were unable to find out the “filling” of some consoles from the manufacturer. Perhaps this is a trade secret or the data has not yet been added.

Instructions for connecting World Vision set-top boxes to TVs

According to our observations, the most popular World Vision set-top boxes at the moment remain devices of the following models: Premium, T62A and T62D. That is why we will take screenshots of equipment for further instructions for these consoles.

However, we dare to assure you that the instructions are equally suitable for any of the device models of this company, the main thing is to do everything in the same way as the review. The general connection diagram is as follows

The antenna is connected directly to the digital set-top box through the corresponding input. In this case, the connection to the TV itself is made by ONE of 3 options:

1. Via HDMI cable. Such a wire is usually not included in the kit. However, if your TV has such an input, then it must be used first. The thing is that HDMI provides the best image quality and is generally more durable. It is best to buy a cable from trusted companies: Twisted Veins, Mediabridge ULTRA, Monoprice. A meter of their cable will cost 2-3 times more than cheap analogues, but their quality will be 5 times higher.
2. Via RSA (tulips). Particularly relevant for TVs older than 7-10 years of production. These models do not have HDMI, but there are multi-colored inputs for RSA. They are also called “tulips” for their corresponding color. 2-3 meters of this cable are often included with the set-top box. Its quality leaves much to be desired and when using it, be prepared to replace it after 2-3 months of active use. On some TVs you will find options in which you will need to connect not 3, but 2 or 1 RSA output. The principle does not change here, the main thing is not to make a mistake with the colors.
3. Using converters and adapters. This is especially true in case of absence or failure of any output on the TV. Adapter from RSA to SCART. A special SCART output can be found on TVs that are more than 10 years old. According to our observations, many subscribers still have such “tenacious” TVs. In stores, the adapter can be seen for 200-300 rubles.
4. RSA-HDMI signal converter. It may be useful if, for example, the output for “Tulips” on your TV is broken. Costs vary, from 500-1000 rubles on average.

After the device is connected, to turn on the set-top box and check the connection, you must do the following:

1. In the TV menu, go to the signal display mode you need. For HDMI, this is the corresponding mode. For RSA, AV (Audio-Video) is usually selected.
2. After this, you can turn on the set-top box and press the power button on the remote control.
3. If the welcome menu appears, then the connection was made correctly and you can begin directly setting up digital channels.