How to set the time on the Samsung TV screen?

Possible problems and ways to solve them

Despite the simplest interface of modern LG TVs, sometimes problems arise with setup. Let's consider the most popular of them and solutions:

• No image available. Check the correct connection of the digital set-top box, including the integrity of the cable. If you are using wireless communication, make sure the modules are working.

Auto search did not find all channels. Most likely this is due to a weak signal. You can check its level by pressing the “info” key on the remote control. A scale will appear indicating the signal quality. If it is low (less than 50%), use manual tuning, or purchase equipment to enhance the signal. Found a mistake? Select it and press ctrl+enter

Location, date and time

Selecting the correct country will allow you to register the device for official use, download additional software and select current digital TV channels.

1. Go to the general settings section (similar to the previous point).
2. Here we go to the “country” tab. A list of countries will appear where you need to find Russia and select it.
3. We go back by clicking on the “exit” button.
4. In the general settings tab, select “date and time” and set the correct data, including the time zone.

The performance of various software depends on the correct implementation of this point. The TV signal or wireless connection may not work properly if the date and time are set incorrectly.

Without Internet access

Don't despair. Wireless connection still works. It’s just that a person will additionally have to buy a special adapter for TV. It's called a transmitter. Costs about 2,000 rubles. With its help, you can display images from your iPhone on TV. The main thing is that the TV has HDMi connectors.

Connection instructions look like this:

1. Insert the transmitter into the TV.
2. Install iMediaShare on your Apple phone and launch it.
3. Connect iPhone to the Internet.
4. Select the desired TV in the program.

As practice shows, this technique is not used too often in practice. Therefore, users prefer a wired connection.

What you need for a DLNA connection

First, let's look at the highest quality connection. Samsung LED TVs often have DLNA support. Using it, you can connect your iPhone to the device without wires and jailbreak, which greatly simplifies the task.

What might be required to bring your idea to life? The following are required:

• iPhone or any other Apple device;
• TV
  that supports DLNA;
• Twonky Beam
  program .

That's all. Nothing else is needed. What exactly needs to be done? How to connect an iPhone to a Samsung TV and more?

How to make changes on the Lumax DV 1107 HD digital tuner

If you use a Lumax DV 1107 HD digital set-top box, here you can also configure the data based on the current settings. The algorithm of actions is as follows:

• enter the Menu;
• go to the Time section;
• select Region and time;
• set parameters based on region;
• save the information.

After making changes, restart the equipment. It is advisable to check that the information is entered correctly. To do this, enter the menu again and make sure that the information has changed and been saved.

Auto search for TV channels

Most LG TV settings can be done automatically. Thus, all models provide an auto-search function for available TV channels. Launches in just a couple of clicks. Finds digital and analogue channels if the available signal allows. Searching for TV channels on LG TVs is as simple as possible; the user only needs to specify the related parameters and confirm the launch of the automated process. We do the following:

• Go to the LG TV settings section and select the “channels” tab.
• We indicate the signal standard by which the search will be performed (digital or analog).
• Click the “start search” button.

The auto search will begin, and the found programs will be displayed on the screen during the process. By default, paid and encrypted ones are skipped; if you wish, you can activate them later (you will need to pay for access). The system will automatically number the found TV channels. Upon completion, the user can adjust this list or add captions to each program.

Disable automatic updates

In Smart TV, by default, the function of automatically updating the current software and the OS itself is activated. On the one hand, this is convenient, since the user always has the latest software at his disposal. On the other hand, this leads to some problems - after updating some important software, all settings fail, including found TV channels. Therefore, many users disable auto-update. This is done as follows:

• In the general settings section, go to the “Digital cable” section (in some versions it may be designated as “Digital”).
• A new window will appear in which we click on the “turn off auto-update” button.

We recommend running automatic updates at least once every six months. This is due to the fact that the OS version becomes outdated over time and errors may occur when installing various software, or the device will stop playing any content format. To do this, follow the same procedure, instead of the “disable” button, click “enable”.

Best apps for Samsung Smart TV

Official widgets hosted in Samsung Apps

Peers TV

The application runs on earlier versions of operating systems. Downloaded from Samsung Apps. The cache size is user-selectable, so the program works satisfactorily at low connection speeds. The controls are simple and intuitive. Another positive thing is the program schedule, no lags, you can add playlists. Unfortunately, there are a lot of ads that are disabled in the paid version.

Like TV

An application that combines Internet television and online cinema. Convenient navigation - TV channels are divided into categories: “Favorites” tab, TV program, constantly updated video library. The downside is that you must be a subscriber of Siberian Networks. Users report problems with sound and frequent application crashes.

Ateka

An online service that broadcasts the world's best TV series in Russian and in the original language with subtitles in high quality. The archive is constantly updated, new items appear simultaneously with world premieres. When you sign up for a paid subscription, you can watch content on up to five devices under one account with simultaneous access to two video streams. The interface is friendly and intuitive. As a bonus - free access for 1 week.

A service with a large archive of media content, which is conveniently divided into thematic collections. The quality is good, many products are in 4K with 5.1 surround sound. About 50 Internet TV channels are broadcast, some for free. The main disadvantage is that a paid subscription does not provide access to the entire archive; an additional fee is charged for viewing the highest-grossing films in HD and UND quality. Users mark the debiting of money without subscribing. The free version has a lot of advertising.

Megogo

One of the largest online cinemas. Concise interface with convenient access to categories. Movies are divided into categories (title, year of release, popularity, etc.). There are many selections: films of the year, funny comedies, spectacular action films, etc. The paid subscription includes additional options, for example, the function of pre-ordering new films, their rental, etc. Cons: poor support service. There are cases of charging subscription fees without the user's knowledge.

Unofficial, downloaded from third-party resources.

XSmart

An aggregator application with free access (the authors claim that it is legal) to television and film media libraries. The free version has up to 720p quality. Registration and a paid subscription are required to access HD and 4K content. Users note easy navigation, detailed descriptions of films, and distribution of content into categories. Recently, the widget has started to work worse - there are quality problems.

ForkPlayer

The popular application is supported by most TV models. Provides free access to a huge archive of media content. Supports IPTV streaming. Of the minuses, the interface resembles the menu of push-button phones from the early 2000s, which makes setting up the application quite difficult. An abundance of tabs and an inconvenient virtual keyboard do not add advantages to the application.

GetsTV

A universal program for watching TV, movies and series on Samsung Smart TV. The content archive is large, updated regularly, there are a lot of products in the 18+ category. The free version supports resolutions up to 1080x720. For HD and 4K quality content you need to sign up for a paid subscription. 20 free TV channels are available; after paying for access, about 200 open, including in HD quality. A lot of advertising.

HDrezka

Free client of the famous HD cutting site for watching movies. The interface is minimalistic. Content is grouped by categories: movies, TV series, anime, etc. To view, you must create an account on the site. The performance of the client depends on whether the content on the site is blocked or not. Lately there have been problems with access. To bypass blocking, the latest versions of the application have many new mirrors and it is possible to enter your own.

Manual search for digital TV channels

If you live outside the city limits, then first make sure that your locality is within the broadcast zone. To do this, go to the RTRS website (map.rtrs.rf) and find your region there. The numbers indicate the location of the repeaters. If you are too far from them, we recommend using other broadcasting standards (satellite, analogue or iptv). No. 4-4If there are no problems with this, proceed to setting up the LG TV:

• In the TV menu, go to the “Settings” item, select the “Manual search” tab.
• A dialog box will appear where in the “signal type” section we select the cable.

Important: if the specified section does not appear, it means that you entered the country incorrectly at the previous stage.

• We indicate the following data: frequency H – 247000, frequency K – 770000, modulation – 256, LD – auto. These parameters are relevant only for Russia; for other countries they will be different.
• Check the box next to “skip encrypted channels”. If this is not done, they will be automatically added, but when you open them, a message will be displayed each time that the signal is encrypted, which is quite inconvenient (if you scroll through programs).
• Click "quick scan".

On average, the search process takes 15-20 minutes (depending on the TV model and current location). When finished, do not forget to click “save”, otherwise you will have to start the search again. This method is good because it allows you to find channels, even with a weak signal. Therefore, residents of remote settlements use manual tuning.

What time zone should be on Tricolor

For most subscribers, it is not clear why to change the receiver settings. The answer is extremely simple - for the convenience of the user. The setup process is simple, so it is accessible even to inexperienced equipment owners. The procedure takes from 5 to 10 minutes.

If the receiver shows the current time, but the likelihood that the expected broadcast will be missed is completely eliminated. After changing the equipment settings, you can safely set a timer to turn on and switch the desired channel.

Regions + time zones:

Interface language

First of all, you need to make language settings:

1. Turn on the TV and press the Home button on the remote control (on some models it is indicated in the form of a house).
2. Open the LG TV settings section in the internal menu, select the item indicated by an ellipsis.
3. Several tabs will open, among which we select “general”.
4. We go to the “languages” item, install Russian in all sections.

Now, when using any function (internet search, additional software, games, etc.) the great and mighty will be displayed.

Setting up IPTV

This section is only relevant for Smart TV. If you are the owner of earlier models, you can skip this point. Before setting up your 4K LG TV, connect it to the Internet. This can be done via a wireless connection (Wi-Fi) or via a LAN connector. Having made sure that the network is working, we proceed to activating IPTV broadcasting:

• In the “network” section, click on the “select” button.
• A dialog box will appear where you need to select the connection created in the previous step (wireless or LAN) and click on the “update” tab.
• After waiting 1-2 minutes, press the “ready” button.

• We create a new account in the Smart TV operating system, indicating your login and valid email address. You will receive an email in which you need to follow a link to activate your account.
• Download the SS IPTV application from the LG market. After installation, the program will issue a code.

• We go to the official website of the software developer, in the “playlist editor” section, enter the received code.
• When the system checks the correctness of the entered data, click on the “add device” tab.

• Download the IPTV playlist (you can get it, for example, from your provider, or find it on the Internet).
• Open the downloaded file in the editor. A list of available channels will appear. Click “save”.
• We go into the application, click on “update”, in the dialog box that appears, select the downloaded playlist.

It is not necessary to download the playlist; you can select the “external playlists” section in the application, then “add” and simply insert a link to the file (not the website, but the address of the file itself).

Connection methods

It is important to understand that modern TVs support the connection of some external devices. And this makes life much easier. Some TVs even allow you to connect to the Internet! All these parameters will have to be taken into account when implementing the task.

How to connect an iPhone to a Samsung TV? In general, this can be done in the following ways:

• via HDMI;
• using composite input;
• using a USB cable;
• via Apple TV;
• via ChromeCast;
• via DLNA.

The last option is used in practice most often. You can also use a wired connection. The remaining options are not stable and may work with errors. But with the right actions, no difficulties will arise.

Satellite television

Despite the development of the digital signal and IPTV, many still prefer to watch satellite channels. Next, we’ll tell you how to properly set up satellite broadcasting on an LG TV (a dish is required).

Search for free channels

To find free broadcasts via satellite signal, we perform the following procedure:

• We buy a set-top box that connects to the TV via an HDMI connector (if you don’t have one).

Please note: some TV models have a built-in receiver for a satellite signal; they do not require a dish - the cable is connected directly to the connector on the case.

• Having installed the antenna plug into the TV or set-top box, go to the “Channels” section.
• A new window will appear, in the “source” tab, select “satellite”, click “OK”. If several dishes are connected to the TV, in the “satellite setup” section you must select the one that was connected in the previous paragraph.
• Having finished with the settings, click on the “automatic search” tab. Upon completion of the operation, the system will display a corresponding message.

As in the case of an analog or digital signal, the operating system will automatically assign serial numbers to the found TV channels, which can be changed if desired.

Search for paid channels

To view paid satellite programs, you need to purchase a special module from your television provider. To activate paid TV channels, do the following:

• We register the purchased device on the service provider’s website. Usually you need to log into your personal account using your personal data and enter the equipment identification number.
• We insert the module into the TV connector (which one depends on the specific model).
• We activate the automatic search function, similar to the previous point.
• Upon completion, paid (i.e., paid from the provider) channels will be decoded and become available for viewing.

When purchasing a new module, you will need to re-initiate the search process, which will reset the numbering. Therefore, it makes no sense to change the list; leave the sequence numbers generated by the system.

Apple TV

The easiest solution for many is to use AppleTV. This technique is suitable for devices that can connect to WiFi. How to connect an iPhone to a Samsung TV in a similar way?

1. Install AirPlay on your mobile device.
2. Connect your TV to AppleTV and Wi-Fi.
3. Turn on Wi-Fi on iPhone.
4. Open any video on your device and start watching it.
5. Swipe up from the bottom of the screen.
6. Click on the AirPlay button.
7. Select AppleTV.

Everything is extremely simple. Now we understand how to connect an iPhone to a Samsung TV and more. The proposed methods work flawlessly!

How to set channel order

Often, it is necessary to retune the TV, after which the channels change their usual location and are arranged in a chaotic order. This mostly happens after automatic setup.

Many Samsung models are equipped with a function for sorting and organizing TV channels. Thanks to her, it’s not difficult to make the necessary changes:

1. Enter “Settings”, then find “Channel List”. In some models, login is performed through the task manager login button located on the remote control.
2. In the list of channels, click the “Change channels” icon located at the top right.
3. At the bottom in the submenu, select “Change number”, mark the desired channel with a tick and move it to another place.
4. The changed channel position is confirmed by pressing “OK”.
5. According to a similar scheme, the remaining channels are moved to other places.

After starting the automatic search, the placement of channels may change again. The same will happen after automatic updating, unless this feature is disabled. In such cases, you will have to do manual adjustment again.