Samsung smart TVs in 2021 come with two voice assistant options: Samsung Bixby or Amazon Alexa. Both allow you to control some TV functions using your voice. You can also control other smart devices in your home, as well as get other information such as the weather forecast. It only takes a few steps to enable the voice assistant. Once you launch it, you will save time and click on the remote control by simply saying what you want. Whether you want to use Samsung's Bixby or set up your Samsung TV with Alexa, here's how to set up the voice assistant on your device. Samsung Smart TV.(Image credit: Tom's Guide) Go to Settings > General > Voice. You will be asked if you want to set up a voice assistant. Click OK.(Image credit: Tom's Guide)
Teach Bixby to remember your voice.
Press the microphone button on the remote control and say what you see on the screen. You'll say, "Hey Bixby," "Sign into my account," "Sign into your Samsung account," and "Switch to my account with my voice." After you say each phrase, release the button on the remote control. Once the process is complete, you can set up your Voice ID later by going to Settings > General > Voice > Bixby Profile Settings. (Image credit: Tom's Guide) To find out what Bixby can do (and how to properly say the prompts ), visit the Explore Bixby menu. It breaks commands into groups such as Device Management, Music Streaming, and SmartThings. (Image credit: Tom's Guide)
How to turn off voice control?
Operating your TV using your voice may not be fun for some people. Also, according to a large number of users, voice instructions are irritating, as they distract from viewing information on the screen.
Therefore, a very popular question among users is how to turn off the voice instructions or completely turn off sound control.
This can be done in several steps:
- Go to the TV settings.
- Select the “System” section.
- Select the “Voice instructions” subsection.
- Select the “Off” mode.
You can completely disable the recognition of sound commands in the same section. To do this, as described above, you need to press the “ Off ” mode. Every year, the services available on TVs will improve.
LED screen technology has great prospects, which means TV manufacturers will develop and add new functions. Models using bluetooth, Wi-Fi, and Smart TV headsets are already available. The virtual assistant involved in voice recognition will not be left out of attention either. In the near future, major manufacturers will release devices with more advanced voice control. There is no doubt that Samsung will be a leader in this area.
Learn the commands and customize your language.
Go to Settings > General > Voice and select Alexa Settings. You can learn about commands you can use to control your TV and Alexa. You can also choose a different language. But for more Alexa settings, you need to open the Alexa app on your phone. Interestingly, you can't access Alexa settings on your TV using your voice; You will receive a message asking you to open the application on your phone. Whether you chose Bixby or Amazon Alexa, you're now ready to use the voice assistant on your Samsung smart TV.
What features are not available for voice control?
Voice control capabilities differ for each TV, so it is impossible to pinpoint the functions that are not enabled using commands. For each device, you need to see a complete list of operating commands for voice control in the TV Help menu.
Possible commands that a voice-controlled TV will not perform:
- Search and switch through applications that are not pre-installed;
- Changing screen brightness;
- Entering text into the search bar;
- Go to device settings;
- Search videos from third-party sites.
Function value
In order to further carry out the deactivation procedure more quickly and naturally, it is suggested that you first understand what talkback is. If you are aware of the localization of the option in the phone parameters, you can easily find other controls.
Voice guidance mechanisms are designed for users with poor vision or no vision at all, while the system somewhat simplifies interaction by reproducing all manipulations by voice. In practice, the option is predisposed to people who have previously sat at the computer a lot, since all operations are more reminiscent of clicks with a regular mouse.
Before you turn off voice guidance on Android, you should understand that the function provides voice acting for actions performed with one click. Additionally, there is a notification about incoming calls, and during the shaking process it reads all the information displayed on the interface.
How does a Smart Touch Control differ from a push-button remote control?
| Remote controller | Button | Intellectual |
| How to connect | Works immediately after installing batteries, no need to connect. | After installing the batteries, you need to connect them to the TV. |
| What TVs does it work with? | Works with any Samsung TV. | Works only with the TV that came with it. If there is no such remote control in the box, then the smart remote control will not work with your TV even if you buy it separately. |
| How many TVs can be controlled simultaneously | Works simultaneously with several Samsung TVs. | Works with only one Samsung TV at a time. |
What to do if the TV turns off immediately after turning it on
One of the popular questions asked by TV receiver owners is why the TV turns on and then turns off immediately. This behavior of the device is classified in different ways, ranging from external factors and ending with a breakdown of the device itself.
Causes
There may be several reasons why Samsung or Philips TV receivers immediately turn off after being turned on.
- loose connection of the plug to the socket;
- remote control failure;
- set sleep timer;
- software failure;
- failure of the power supply.
To find out why, when you turn on the TV, the image appears and immediately or disappears after a while, you need to diagnose the device for faults and, if identified, immediately carry out work to eliminate them.
Faulty remote control
A broken remote control is one of the common reasons why a working TV goes out on its own. It is necessary to inspect the remote control and, especially, its buttons. They can be pressed in or stick, after which the remote control starts randomly sending commands to the television receiver.
To make sure that the problem is in the remote control, you need to remove the batteries from it or take the device out of the room. If this is indeed the problem, the TV will work normally and will stop turning off immediately after turning on. You can check the functionality of the remote control using a mobile phone camera.
You need to turn it on, point the remote control at the lens and press some buttons. If it is working, the user will see red LED flashes. If the problem really is with the remote control, you will need to disassemble it and clean it thoroughly. You can carry out such repairs yourself or contact a specialist. If the actions do not bring results, you will need to purchase a new remote control.
Socket
The next common reason for a television turning off immediately after turning it on is the plug not being firmly inserted into the electrical outlet. In this case, the plug overheats greatly and this leads to a short circuit, as a result the user notices that the LG or Samsung TV turned off immediately after turning it on.
The reason for the strange behavior of the TV panel may be a broken power cable. Because of this, insufficient voltage is supplied to the device; after switching on, the protection is triggered and the TV immediately shuts down.
You need to inspect the cable for breaks, kinks or shocks. If they could not be detected visually, it is better to replace the cord, because damage may be inside and it is very difficult to identify them.
Sleep Timer
Another popular reason that a Sony or other brand TV receiver turns off immediately or after some time after startup.
It may be incorrectly installed by the user himself, turned on as a result of children's games with the remote control, or activated as a result of a date and time failure in the television receiver, for example, during a power surge or power outage. To fix this problem, you need to open the menu, find the timer settings and turn it off.
If you cannot do this on your own, you need to refer to the operating instructions or call the customer service center of the company that manufactured the TV.
Software
This problem is typical for TVs with Smart TV function. If the user has not disabled automatic updating, the TV settings may be accidentally changed during the installation of a new version of the software. The second possible reason is that an application was installed on the TV that independently selects the time to turn the device on and off.
To fix the error, you need to check the settings of the TV receiver, and also carefully study all the downloaded software and remove questionable programs.
If the TV starts up on its own at night and immediately turns off, it means that it is trying to perform an automatic update. To do this, the device starts up, connects to the network, checks for new software versions and, if it does not detect them, shuts down. To prevent this from happening, you need to disable device auto-update.
power unit
Failure of the power supply is also a possible reason why the TV turns off immediately after startup.
The following signs indicate this:
- the TV receiver does not respond to being turned on, but the power indicator blinks continuously;
- the device turns off immediately after startup or after some time;
- The power lamp does not light up.
To check this part, you need to measure the voltage on the TV microcircuits with an ammeter. If power is not supplied, this confirms that the fault has been correctly identified.
The most common cause of problems with the power supply is fuses. You can identify a broken part visually. It looks swollen, has traces of burning, which appeared if the part smoked due to a voltage drop, and it may also have missing contacts.
To replace, you can purchase the necessary spare part and solder it yourself, or contact specialists for repairs.
What to do
If the TV randomly stops working after starting, to determine the type of failure you must:
- check the functionality of the remote control;
- make sure that the power cable and plug are intact, have no signs of damage, and that the plug itself is tightly inserted into the socket;
- go to settings and make sure the sleep timer is disabled;
- disable automatic updating of the TV receiver and remove all applications that can independently launch the device;
- disassemble the TV and diagnose the power supply.
Having discovered a malfunction during the inspection of the television panel, the user needs to fix it on his own, if possible, or seek help from specialists.
What to do if the TV turns off immediately after turning it on Link to main publication
Home page
To expand the capabilities of your TV receiver, the user can connect an Android phone to it. This can be done in many ways if... Many consumers are familiar with the Sony Bravia brand. TVs under this name are distinguished by their high quality and reliability, as well as a wide range of functions... To connect satellite or cable television directly to a television receiver, the user will need a CAM module for the TV. Connect it to the TV... When purchasing a new TV panel, it is important to consider the distance to the TV. Watching your favorite shows or movies with too much or, conversely,... When there are a lot of guests in the house, they all need to be entertained. There is a fairly simple way to do this - sing a song at karaoke... With the development of electronic technology, TV devices have been constantly improved. Nowadays, most homes have LCD screens. Previously, people used CRT TV...
Peel Smart Remote
Peel Smart Remote is such a powerful app that it can control not only your Android TV or Apple TV, but also other home appliances. In addition, Peel will create a personalized TV program for you based on your viewing. The more shows you watch using Peel, the better the recommendations you get.
No matter where you live or what TV you use, you can easily set a reminder so you don't miss your favorite show. Unfortunately, recently the application is exclusively available only in the Samsung Galaxy Store, but you can always try to find and install the APK file.
Anymote
Anymote - This smart remote works with both IR and Wi-Fi. But it is worth noting that it is not compatible with Huawei and Sony smartphones; from LG only G3 and G4 are supported, and from Samsung from S4 to S6 (but not from S7 due to hardware limitations).
If your phone is compatible, you can create macros to perform multiple commands with one touch, and use automated tasks, including integration with Tasker and Google Now voice commands. There is a floating widget for accessing controls even while using other applications.
AIR Gestures lets you change channels by simply swiping your hand over the phone, or adjust the volume level (up and down). Anymote can also automatically mute your TV when someone calls you.
The customization options are quite extensive: you can customize buttons, change colors, layout, text and icons. The paid version will allow you to add an unlimited number of remote controls and backup settings.
A universal way to disable the assistant
New Smart TV receivers have a quick actions menu. It is often called "Accessibility" or some similar title. The menu is activated when a certain button is pressed. On LG TVs, you must hold down the “Mute” button. The settings in the “Accessibility” menu will immediately open, where the desired setting will be.
On Samsung brand devices you also need to hold down the volume button.
Hold down the key until a window titled "Availability Links" or "Special Access" appears. possibilities". Inside there will be all the auxiliary functions that often require turning off. There is also a “Voice instructions” item.
Set the assistant's status to off. After this, voice repetition will not work. Accompanying is also included.
Which remote control did I choose and why?
I decided on the combined radio/IR remote control MX3 . The solution is the most universal and easy to use.
The remote control operates on a radio frequency and communicates with a small USB receiver. It's not as convenient as Bluetooth and doesn't work with most devices out of the box.
This way the receiver connects to macOS, Windows, Linux and even Raspbian (the operating system for the Raspberry Pi) without the need to install drivers or additional programs. You can control both the mouse cursor and enter commands from the keyboard.
There's a perfectly usable QWERTY keyboard on the back of the MX3. Russian letters are applied, which can be switched using the Alt button. It works fine on Smart-TV, but for TV set-top boxes on Android you will need to install applications that support the Russian language.
The remote control can block the buttons that are located on the bottom edge. While working with control buttons, the keyboard is locked and vice versa.
The backlight turns on when you press the buttons and goes out after 3 seconds
There is a backlight. It works for a few seconds after pressing or is completely turned off by a special key.
The MX3 remote has 5 programmable buttons. The procedure for this is as follows:
1. We place the original and programmable remote controls opposite each other, combining their IR transmitters.
2. Press the TV button to enter the programming mode (the red LED will start flashing).
3. Press the programmable button on the original remote control.
4. Select one of the available buttons on the smart remote control (you can program the main power button and the four colored keys below).
5. Confirm saving the settings by pressing the TV button again.
On the one hand, it seems that five keys are not enough, but in most cases this is enough.
I tied the main power button to turn on the TV, and allocated one of the color buttons for switching inputs on the TV. The remaining three were programmed to turn on/off the air conditioner, increase and decrease the temperature.
So, in most cases, you can get by with a universal remote control to control the cooling, turn on the TV and control the TV set-top box. It is to this that the radio receiver is connected.
What types of remote controls are there?
There are three main types of remote controls: infrared, radio and Bluetooth.
Infrared remote controls have been familiar to many of us since childhood. Such control elements operate in a line-of-sight zone, and particularly powerful models can “look around corners.”
A little later, feedback appeared in similar remote controls so that the user could see the current operating parameters of the device. Many air conditioner models are equipped with IR remote controls with feedback, which allows you to display the current operating mode and set temperature on the screen.
Bluetooth remote controls appeared as this standard evolved. Technology has learned to transmit signals at higher speeds and over greater distances. The modules now consume minimal energy, and reconnection does not require user action and takes a couple of seconds.
Modern devices often cannot cope with a large number of Bluetooth-connected devices. So every now and then remote controls, keyboards, wireless headphones or smartphones “fall off” from televisions.
Other types of control panels are usually combined into the category of radio remote controls . They transmit a signal from a transmitter to a receiver at a specific frequency.
Most often, such remote controls have a maximum range, but require a special receiver, which is made in the form of a miniature USB flash drive.
The indisputable advantage of such solutions is simplicity. Everything works right out of the box, plug in the receiver and the remote is ready to go straight away with no pairing or setup required.
Many modern universal remote controls combine several technologies for convenient communication with different gadgets.
