How to adjust the signal quality on Tricolor TV: necessary actions, tips, reviews

• December 15, 2020
• Equipment
• Maria Ivanova

Many users quite often encounter such a problem as poor signal quality, or even its absence. It happens very often when the picture freezes, breaks into small squares, or the message “No signal” appears. These and many other signs indicate that the signal being received is insufficient and weak. And in order to adjust the signal quality on Tricolor TV, it is recommended that you read this article.

Ways to check signal strength and level

Any user should know how to adjust the signal quality on Tricolor TV if he wants to use the company’s product with pleasure. For example, in order to check the quality and level of the signal, you need to perform a number of actions:

1. First of all, you need to turn on the information channel from Tricolor TV.
2. Then you need to press the red button on the remote control itself.

After these manipulations, an information window should appear. At the very bottom of this window you will see two bars; they display the level and strength of the signal. If signal reception is stable, then these bars should be filled to approximately 80% or more.

Subtleties of installing the receiver

Installing the receiver to the TV is carried out in one of two ways:

1. Using a high frequency (HF) antenna cable.
2. Using a low frequency (LF) cable with connector.

The RF is connected to the TV socket intended for the antenna and to the “RF Out” socket on the receiver. When you plug in the receiver, the word “BOOT” and the TV channel number should appear on the screen of the television device. Turning on the channel search, we get the phrase “No signal,” indicating that the receiver is working correctly.

The algorithm for attaching LF to a satellite receiver is the same as for HF. The only thing is that after the “BOOT” message appears, press the “A/V” key on the remote control and wait for the “No Signal” message to appear. If the inscription appears, then everything was done correctly. Other information that appears on the screen of the television device indicates that the equipment is assembled incorrectly.

Steps to troubleshoot some problems

However, not all users know how to adjust the signal quality from Tricolor TV. To reset settings to factory defaults, it is recommended to do the following:

1. First you need to open the menu.
2. Next, you should select the settings tab, otherwise it can be called “Applications” or “Settings”.
3. Then you need to select the item called “Factory settings”.
4. Then you should confirm your choice, and to do this you need to click on the “Ok” button.

After you have reset the factory settings and rebooted the receiver, you will need to configure the device again. In the new settings, you will need to indicate your region, as well as the satellite television operator itself. If these manipulations did not help and the channels still do not show high-quality channels, you will need to re-configure the antenna to receive a signal from the satellite.

If 2 bars are filled by approximately 70% and the TV still does not show, it is quite possible that this is due to a change in the channel display settings themselves. And in order to eliminate this malfunction, that is, for the channels to work again, it is necessary to update the list of TV channels.

Before setting up Tricolor TV, you need to perform a number of manipulations:

1. On the remote control, press the “Menu” button.
2. Next, select “Search for channels”.

Installation of a television connector

The television connector is connected to the converter in accordance with the diagram:

1. Strip the top insulated layer of the cable to a length of 1.5 cm.
2. Unfold the braided shielding along the wire.
3. Turn the foil over the braided covering.
4. Remove the insulating layer of the conductor 1 cm long.
5. Install the cable into the F connector.
6. Leave a protruding central conductor 2 mm long (the excess is cut off).
7. Seal the F-connector along the entire length. This is done with a heat-shrinkable tube or 2 layers of electrical tape covered with silicone-based sealant.
8. Fix the cable in the arc space of the converter using a layer of electrical tape or tie.
9. Connect the other end of the wire to the receiving equipment.

In relation to the antenna wire used, there are two ways to install the receiver to the TV:

• High-frequency antenna cable (HF) - plugs into the antenna socket on the TV and into the “RF Out” input hole of the receiver. After turning on, the combination “BOOT” and the channel number appears on the television screen. When you turn on the channel search function, a “No Signal” notification is displayed, which implies normal operation of the receiver.
• Low frequency cable with connector (LF) - similar to HF. When connected, “BOOT” appears on the television screen. Afterwards, you need to press the “A/B” button on the remote control surface of the receiver. As a result, the “No Signal” notification should light up. The appearance of other information indicates that the equipment was assembled incorrectly.

After these steps, you can start setting up channels.

Main reasons for bad broadcasting

There can be several reasons for a bad signal. In this case, there is no need to panic; you can increase this signal yourself at home. And in order to eliminate the malfunction and improve the quality of the signal, it is first recommended to find the cause of the weak signal. Such reasons include the following:

1. Weather. Quite often the signal level becomes significantly worse due to strong wind or rain. To set up the Tricolor antenna yourself without a device, all you have to do is wait for the weather to improve.
2. Antenna. If, for example, the Tricolor dish has changed its location or the settings of the antenna itself have been changed, in this case the quality and strength of the signal may also drop significantly. And the plate can move due to strong wind, for example, if it was poorly secured. In order to correct the situation, you just need to return the dish to its place, while simultaneously monitoring the signal level on the TV itself. Quite often in winter, a layer of ice forms on the plate; this circumstance also has a noticeable effect on the level and strength of the signal. In order to correct the situation in this case, it is necessary to remove the ice crust. It is recommended to do this very carefully so as not to damage the converter itself and not to move the plate from its original location.
3. Converter. It is a device that receives a signal, then processes it and after that transmits it to the receiver. Difficulties in its operation may arise when the converter fails (is damaged). Due to a damaged converter, the signal level may noticeably drop. And how to adjust the signal level from Tricolor TV in this case? It is worth noting that such a problem is quite rare, but nevertheless, in no case should it be excluded.
4. Cable. Quite often the signal level drops due to a damaged cable. Before adjusting the signal strength on Tricolor TV, you need to check the cable for any external or internal damage. If during a visual inspection it was revealed that the signal does not pass through because the cable is damaged, experts recommend cutting off the defect and only then connecting the ends together using a plug. Next, wrap the cable with electrical tape. And you must remember that while laying the cable, under no circumstances should there be any wiring or sockets nearby. Even if they are there, there must be a distance of at least 15 cm between them and the TV cable. You can find out what diameter the cable should be on Lingsat. All the necessary parameters for satellite broadcasting for a specific area are specified there.

What else does the quality and strength of the Tricolor TV signal depend on?

Other reasons for poor signal quality include the following:

1. Incorrectly organized satellite visibility.
2. Incorrectly configured antenna unit installation parameters.
3. Improper maintenance of the deflector.
4. Poor quality network installation.
5. Presence of nodes and points of signal loss.

In order to determine why the quality and strength of the signal are lacking, you can pay attention not only to the global parameters that were discussed earlier, but also local ones. Another way to put it is that it may depend on the process of checking the antenna cable before examining each individual element of the data network. Only after it has been possible to determine the cause of the bad signal, will it be possible to set up the signal on Tricolor TV.

How else can you check the signal level?

In order to check the quality and strength of the signal from Tricolor TV as efficiently as possible, you need to make the settings directly on the TV itself. And in order to figure out how you can do this yourself, you need to look at the operating instructions for the receiver.

There is such an option as “Infobanner”. It consists of 2 indicators. Moreover, the left signal is responsible for the strength of the signal from Tricolor, and the right one is responsible for the quality. It is very important that these indicators are at least 70%. But there are exceptions when receivers work stably at 48–50%. But in order for the receiver to always work correctly, this figure must still be at least 75%.

But in any case, first of all, you need to focus on the numbers that are indicated directly in the operating instructions for this receiver. If this data is not in the instructions, therefore, this figure should be at least 70%.

Receiver registration

Receiving a television picture occurs after registering the equipment. Registration is carried out in one of the following ways:

• On the Tricolor website;
• At a sales office or an authorized center (usually after purchase at specialized points of sale, the receiver is registered);
• Through the technical support department, when you have a subscription agreement in hand.

The identification number is a sequence of 10-12 digits. The number can be found on the packaging sticker or on the receiver body sticker. There is no inscription on some packages and cases, so you need to go to the receiver menu. When clicking on the “Status” submenu, the user will see the ID.

To conclude an agreement, it is required to provide the user’s personal data (full name, passport, date of birth, place of installation, contact information).

Registration actions end with confirmation of the equipment over a telephone conversation with the Tricolor service. You must indicate the purpose of the appeal, full name, identification number.

Satellite visibility

The principle of operation is as follows: the antenna unit directs the focus of the deflector to a point in the sky. At the same time, in order for the signal to pass through, it is very important that there are absolutely no obstacles on the imaginary line between the satellite and the unit. The antenna's viewing area must be clear, that is, there should be no vertical walls or objects that reflect the signal. Otherwise, the antenna unit will need to be re-weighed.

Antenna positioning process

The accuracy of the antenna direction plays a key role in the quality and strength of the received signal from Tricolor TV. You can correctly adjust the position of the deflector as follows:

1. To do this, you can use a special device called SatFinder.
2. It is necessary to take into account the angle of inclination to the horizon vertically and azimuth. In order to find out this data, you need to go to the official website of "Tricolor TV", then to the "Help" section, then click on the "Connecting equipment" section, then click on the "Antenna setup" section, this is where you can find out this data for a specific city.
3. By manual rotation. It is recommended to do this very carefully and slowly. You need to turn it about a couple of degrees, while making short pauses, about 10 seconds. This is necessary so that the indicators on the TV screen can be updated.

If you set up the antenna correctly initially, then later you may not need to set up the signal on Tricolor TV yourself.

What to do when the picture crumbles into squares or disappears altogether

But if the transmitting equipment is operating normally, then the cause of the breakdown will have to be found and corrected on the spot. To do this, you can invite a specialist or try to establish broadcasting on your own. It is important not to fuss and follow a clear sequence of actions.

First, you need to reset the receiver to factory settings, reconfigure it to the satellite and search for TV channels automatically or manually.

Satellite visibility

If system diagnostics show that the quality and strength of the received radio waves is zero, then the issue may be a loss of communication with the source of radio waves. It is necessary to check whether there are any physical obstacles on the path of the television signal from the satellite to the dish that could affect reception. This could be a solid metal or stone fence built by neighbors, or a huge information board. In such a situation, it is recommended to raise the antenna or move it to a new location and reconfigure it.

Antenna positioning

Sometimes a broken tree branch or strong wind can change the position of the dish relative to the source of radio waves. Even the slightest change is enough for TV channels to disappear from the TV screen. If this is the problem, you will have to start positioning the dish, after which the equipment will be configured again.

There are several ways to ideally position your device. The easiest one is to download the Sat Finder application to your mobile phone. The program automatically determines the coordinates of the antenna installation point using GPS and calculates the direction of the mirror and the angle of inclination relative to the Earth.

Engineering enthusiasts can determine the correct position of equipment using a protractor, ruler, map and compass. But you need to take into account the angle of geomagnetic declination of the area.

If the installation direction is approximately clear, then the receiver can be positioned manually. To do this, you will need the help of household members who will monitor how the reception indicators on the TV screen jump. First, the deflector is slowly rotated relative to the horizon, pausing for a few seconds. As soon as the numbers have stopped jumping, the indicator has reached its maximum, you can begin adjusting relative to the vertical, gradually changing the angle of inclination.

Having achieved the desired clarity of the picture, the antenna should be carefully secured to the bracket so that you do not have to do everything again.

Dirt and weather

The fact that satellite television can malfunction due to weather disturbances is no secret to anyone. On a clear sunny day everything is fine, but as soon as the wind picks up, it starts to rain or snow, watching TV becomes problematic.

Important: Installing a dish with a diameter 10-20 percent larger than recommended for a particular area will help improve the quality of reception of satellite TV channels in bad weather.

Minimum switching points

The most ideal option for laying cables inside the house is from point to point. However, under no circumstances should you use:

1. There is more than one break point on one cable line.
2. Cable wall sockets, which are an additional switching point with a reduced level of reliability of the contact itself.

Before you adjust the signal quality on Tricolor TV, you must first determine the cause of the poor signal, and only then take appropriate actions depending on the reason for the lack of signal. If you can’t do it yourself, there’s nothing wrong with that, you can use the help of specialists.

You can also read reviews from other users about why they choose the Tricolor TV operator, what advantages and disadvantages they encounter during use. For example, many people love Tricolor TV because it is possible to watch a large number of channels in areas where there is no Internet. But the most important drawback that users encountered has not been overcome: bad weather conditions greatly affect the signal quality.

Information site - about Tricolor TV

Home » Setup Tips

Reading time: 3 min Published: 01/31/2020 Category: Setup tips

One of the most common problems associated with Tricolor TV is a weak signal or problems with viewing.

It is worth noting that when the signal quality improves, it is not possible to increase the number of receiver channels. This can only be done if several transmitting and receiving devices are installed. Poor Tricolor signal quality can often be corrected.