How to set up a Telekart remote control on a TV?

Many modern TVs support the ability to synchronize with certain types of remote controls, which can improve the comfort and functionality of the intended use of the devices. One of the most popular control systems is Zala. Zala interactive television is perfect not only for domestic TVs, but also for modern models of LG, Samsung, Sony TVs and even Smart TVs. Despite the ease of connection, most users do not know how to configure the Hall remote control with minimal intervention in the software shell.

How to disable unnecessary buttons

If the TV remote control is used by small children or elderly people, then it is better to immediately disable some of the buttons responsible for the TV operating mode. Accidentally clicking on them may reset the settings.

Disabling the buttons is done using a piece of masking tape. It is glued over a certain area on the printed circuit board. They seal the contact points with the buttons that they want to turn off. If necessary, the masking tape can be peeled off at any time.

Types of remote controls used

First, let's look at what types of remote controls are used by Beeline, since the features of the device model play a key role in troubleshooting the problem. The company has many options for users:

Motorola MXv3. Universal Motorola remote control, suitable for many Beeline tuners. The device can also be programmed to control other devices, which are selected during setup by pressing the appropriate button (STB, TV, DVD, or AUX).
Motorola R1A (RCU300T). Another universal model of a control device, similar to the previous version.
Tatung TTI. A universal, customizable remote control, the principle of setting it up is no different from other remote control options - to get acquainted with other equipment, you need to press the button for one of the modes (AUX, TV, DVD), and then “Setup”.
BeelineRCU01 is a universal device, initially programmed to control a set-top box; through configuration, it can be connected to another type of equipment (TV, DVD player, etc.). The operator has many other variations of remote controls in his arsenal, including universal Beeline, Cisco, Tatung and others. Some of them can work in conjunction with different models of Beeline set-top boxes, while others are tailored only for specific equipment (for example, Cisco, Motorola or Beeline remote controls cannot be configured for the Jupiter set-top box; you will have to use only the device that comes with the package). In addition, they can be with a “Setup” button (modern) or without it.

MXv3 remote control from Beeline set-top box

Initially, remote controls of a certain model are tuned to the set-top box of their manufacturer, but many of them can also be connected to tuners of other brands. Each Beeline remote control comes with instructions in Russian, allowing the user to understand the device settings, as well as how to use it.

Performing the setup procedure

Having certain skills and knowledge, users will not have any questions about how to set the TV on the Hall remote control or select manual channel switching. Using special instructions, you can avoid any difficulties in the future.

There are 2 working ways to configure:

Option #1. Connect the TV you are setting up to the network and go to the menu. Press and hold a separate button on the remote control until the display shows red and then green. Point the Zala diode at the receiver of the TV remote control device and press any selected button on the same remote control. The Hall indicator color should change to bright red. Press the required button on the main remote control (for programming) and wait for the green indicator.
Option #2. Many users do not know how to set up the Zala remote control in an easy way. In this case, you should use the second option. Just hold down the button until the red color appears. The indication will indicate that the buttons can be pressed for programming. The indicator will go into flashing mode and in this case you will need to point the Hall to the TV remote control transmitter. Flashing three times followed by a permanent display means that the button has been programmed successfully.

To find out how to configure the Hall remote control, you do not need to study literature. The entire procedure is performed in several steps. In this case, the device can be programmed with only 4 buttons: on/off, volume control and AV/TV switching.

Preparing for setup procedures

To configure the Zala remote control as efficiently as possible, it is important to first familiarize yourself with the functionality of the device. All main features are indicated in the instructions for the remote control. In addition to the factory recommendations, it should be taken into account that the buttons should be trained exclusively in a separate block. Typically, the button area for setting is highlighted with a black line. The actual setup of the Hall remote control to the TV must be carried out using fully functional batteries.

What to do if the remote control for the Beeline set-top box is broken

The steps to correct the problem depend entirely on its source. If the issue is a software failure, then the issue needs to be resolved using software methods; in the case where the remote control has stopped working due to hardware malfunctions, action should be taken at the hardware level.

Diagnostic measures

If the remote control has stopped responding to pressing certain keys, for example, does not switch channels, or all of them at once, but it has not fallen, no external damage is visible, no penetration of water or visible contamination was noticed during inspection, proceed to the following diagnostic steps:

Press the “STB” button and look at the LED.
If the light is on, reset the remote control settings to factory settings (more on this below).
When the LED does not light up, the batteries should be changed.
If the TV set-top box still does not respond to the Beeline remote control, you need to reset the settings for both the remote control and the tuner. The process may differ slightly depending on the device model, but the principle remains the same.

Performing the setup procedure

There are 2 working ways to configure:

Option #1. Connect the TV you are setting up to the network and go to the menu. Press and hold a separate button on the remote control until the display shows red and then green. Point the Zala diode at the receiver of the TV remote control device and press any selected button on the same remote control. The Hall indicator color should change to bright red. Press the required button on the main remote control (for programming) and wait for the green indicator.
Option #2. Many users do not know how to set up the Zala remote control in an easy way. In this case, you should use the second option. Just hold down the button until the red color appears. The indication will indicate that the buttons can be pressed for programming. The indicator will go into flashing mode and in this case you will need to point the Hall to the TV remote control transmitter. Flashing three times followed by a permanent display means that the button has been programmed successfully.

The largest telecommunications provider Beeline uses high-quality equipment to connect subscribers, but, as with any hardware, devices sometimes tend to fail. Malfunctions occur for various reasons, and the primary task is to identify the source of the problem. Thus, users sometimes encounter such troubles as partial or complete lack of reactions from the Beeline remote control when pressing buttons. Moreover, with a quick inspection it is not possible to determine the cause, which casts doubt on the operability of the device. If you have a similar situation, you shouldn’t panic ahead of time, because most problems can be fixed by yourself, although only a specialist can fix serious problems.

Remote control for Beeline TV set-top box