Universal remote control - how to set it up?
Press the SET and TV buttons simultaneously and hold until the light/indicator on the remote control lights up (usually next to the POWER button). Then we set the code that we previously found in the instructions.
After this, the light should go out and you can immediately use the remote control in connection with the selected device. If the code did not work or it was not possible to find a similar model at all, many remote controls have an auto-search function. For example, if you press the same SET + TV buttons and wait until the indicator blinks, the remote control itself will begin to try to establish communication with the device.
If he picked up the code and some action occurred on the device, then he should immediately press any button on the remote control in order to confirm the found code.
These steps apply to almost all universal remotes without a display.
If someone wants a little more comfort in controlling their equipment, then you can purchase such a miracle device as the Logitech Harmony Touch Remote.
Codes for universal TV remotes
This opportunity is provided by special codes for universal TV remote controls.
Often there are several numbers for one model.
When your device does not have a special key on which “SET” is written, then it is multifunctional and can be configured for a TV, modern DVD player, etc.
In this case, you will need to press a special button called “SET” and any other button on the control device at the same time. For example, when you make a connection, then you need to press the button named “TV” and the power key, then the installed indicator will light up and you will need to enter a special code for a certain type of device.
Player "BBK" - 0743, 0983, 1313, 1873. "Daewoo" - 0021, 2531, 2581, 0061, 0661, 0861, 0931, 1111, 2051, 0081, 0351, 1211, 1811, 1931, 1891, 2411.
"JVC" - 0051, 0171, 0821, 1031, 1181, 0641, 1451, 0301, 1261, 0351. "NEC" - 0021, 0031, 0261, 0081, 0661, 0751, 0051, 0861, 1281, 0421, 0531, 0931, 2481, 0061, 1211, 1321, 1561, 2031.
What you need to connect
Setting up a network connection on TV requires:
- Internet access;
- TV with LAN connector;
- TV instructions.
The user should also first determine his own IP address, which may be needed in the future. Instructions:
- Open your computer's control panel.
- Go to the “Network and Internet” section.
- Go to the “View network status and tasks” subsection.
- Click on "Local Area Connection".
- In the “Status” window, click on the “Details” button.
Features of connecting a wired Internet to a TV are also determined by the type of connection - dynamic IP or PPPOE. It is also better to check this point with your provider in advance. When everything is prepared, you can proceed to setting up the connection.
How to setup?
Like this: You need to hold them for about 2-3 seconds until the “TV” indicator flashes red. This will mean that the programming mode has turned on.
Enter code 991 - this will enable automatic code selection. Next, in order for Rostelecom to begin selecting codes, slowly press the CH+ channel switch button.
One press - one remote code.
As soon as one of the codes works, the TV will turn off. This means that the auto-tuning of the remote control was successful. To save the settings, click OK. In order to go through the codes of the Rostelecom remote control manually, you need to again enter the programming mode, as I said above. Next, look at the list of codes that I will post below, find your TV manufacturer there and enter it.
After this, the remote control indicator will blink twice. Press the CH+ volume up button and see how the TV reacts.
We recommend reading: Return without box
If the code does not work, try the next remote control code from the list.
How to set up a universal remote control for your TV
This may take one minute.
- Double pressing the “TV” button will end the mode setup program.
- Turn on the TV and select TV mode on the universal remote control.
- Enter the code 9999 without releasing your finger from the “9” button pressed for the last time, and release it immediately after turning off the TV. The universal remote will begin an automatic search from the database. This may take a quarter of an hour.
Now you can again enjoy your favorite channels without having to get up and go to the TV and switch them on it. Enjoy watching!
Universal remote control for TV, how to set it up?
If the indicator does not go off, then you need to press the MULT button after entering the code. Dial the desired number and simultaneously hold SET (TV) and POWER. Hold SET (TV) until the red LED is active, then press POWER once, point the remote control towards the switched on TV and wait for his reaction.
Then press the MULT button. In the first and second cases, it is important to know the exact model of your TV.
We recommend reading: Is the discount on fines canceled or not?
Once you know the model, find its code in the instructions. If you do not have instructions, then below is a table of codes for various TVs and more. In the event that the device does not start working, you need to try entering a different number for the existing TV model, or use method 3. If you do not want to configure it yourself Remote control or it doesn’t work, then you can ask an employee of some electronics store, it’s enough for you
