More and more people are saying on the Internet that television channels will soon become paid. You shouldn’t immediately look for a way to decode channels, since such rumors have been circulating for the last ten years, and have not yet come true.
If you want to watch shareware programs, then we can help. Let's start with the fact that all broadcasts, satellite, cable or terrestrial (), are conventionally divided into three categories.
Open television channels, always accessible from any device and completely free, shareware and paid. The first group transmits the signal in open formats, so there is no need to think about how to decode digital television channels. In the second case, flashing the firmware or entering the BISS code yourself can help.
By contacting the specialists, you will receive a ready-made tuner. Of course, you will have to pay for this service, but there is a guarantee from specialists and the receiver will work. Are you confident in your abilities and don’t want to pay? Then follow the instructions.
Why it works
Everything is as usual: laziness and reluctance to spend extra money. It would be enough to hire a specialist and develop their own method of data encryption and that’s it, their channel would become invulnerable to such viewing (by the way, some channels did this, which is why not all of them are decoded, although an intelligent person can do everything - keep in mind that sometimes, the whole point is that the key has not yet been found). But the majority uses standard cryptography methods like Nagravision, Seca 1, Seca 2, Irdeto, Betacrypt, VIACCESS 1, VIACCESS 2, VIACCESS 2.3, VIACCESS 2.5, CONAX, etc. Naturally, they have long learned to select them, and some pirates have become so insolent that they began to produce access cards in industrial sizes ;), I will also talk about them below (about cards, not pirates).
So why do the systems described below work? After all, we don't use any cards. Well, you probably already understood the answer yourself: nothing prevents you from using a computer processor, rather than a receiver, which reads the code from a file, not a card. The principle is the same, the medium is different.
Instructions
To decode satellite channels on the receiver
pay for their viewing for the required period of time in any way available to you that is supported by the television provider.
Also take advantage of the sharing function, which means using an access card on only one satellite receiver
, transmitting information to other devices connected to it. There is also another way to watch encrypted channels - Internet sharing. In this case, you look on the Internet for servers that provide a similar service for a nominal fee (sometimes for free as part of a customer attraction campaign), and they provide you with access to watch satellite channels.
You can also use an alternative way to unlock channels - by entering the keys into the receiver emulator program using the remote control. In this case, you independently search for access keys on the Internet, and then enter them into the appropriate form in the service mode of the device.
If in your receiver
There is no provision for an emulator, update the software to the desired version using a removable drive and an Internet connection. After this, you will be able to enter keys. This works in very rare cases, for example, when the security policy of the company providing you with access to satellite television does not provide for their periodic change (sometimes up to 1-2 times every 10-15 minutes). There are also receivers with emulators that support access key updates, however, this also has its drawbacks. It is always a better option to pay for full access rather than to tune in broken channels every time, thereby, by the way, violating the terms of the contract.
The most interesting satellite channels are in most cases encrypted. In order to be able to view them, you have to pay money to the provider, and considerable money at that. Meanwhile, there are ways to hack such channels, allowing you to watch them completely free or by paying a small amount.
What to do when everything is downloaded
Well, since you have a satellite dish, you probably have already downloaded everything. In general, a rotor would be useful to rotate the plate around the satellites, but I think in any case, one way or another, you have access to the hotbird - we have it free and the broadcast of paid channels occurs unofficially, so you will not completely break the law , decoding its channels. First of all, let's install ProgDVB , here I think my comments are not needed. Softcam Server in the same way . But it’s worth talking about it in more detail; for the device to work properly, you should edit its ini file.
SoftcamServer.ini
SoftcamURL=www.sweb.cz/cardmanie/programy/SoftCam.Key // where to download SoftcamLocation=c:\ProgDVB // where to save, here you should specify the directory ProgDVB ServerMode=3 // do not update automatically - you can specify 0 - to update each launch ManualMode=1 // resave files without confirmation SaveMode=7 // SoftcamName=Softcam // key file names KeybinName=Keys // KeysfileName=Easy // LastDate=02/17/2006 // date of the last download
Installing MD Yankse 1.32.1 TT is incredibly simple, just unzip it into the ProgDVB . Now every time you click on the red checkmarks (aka encrypted channels), wait 5-6 seconds and Yankse will try to decrypt the channel. Its settings can be changed in the Plugins > yankse menu, but by default they are already set well enough for it to do everything automatically, the most interesting menu item is Plugins > yankse > Show Monitor, which allows you to launch its decryption monitor.
For those who are still interested not in free channels, but in the decryption method:
Let's take a closer look at the contents of the file. Its lines look like this: S PPPPPP NK KKKKKKKKKKKKKKKK where C is the encoding letter: I - Irdeto, S - Seta, V - Viaccess, N- NagraVision, X - Conax; PPPPP - provider ID number; NK - key number; KKKKKKKKKKKK is the actual key. (All digital codes are hexadecimal)
Where you can get the keys and generally find out how they are obtained is here - https://www.sat-key.org/.
So you’ve done your first decryption - yes, programmatically, but in fact you didn’t do anything yourself, but this is the first step, and it’s up to you to decide where to move next.
Method number 3
How to decode Tricolor channels using the so-called BISS encoding? This procedure is easy and simple. To do this you will need a satellite dish and convectors, a regular tuner. In the list, select the channel you want to open. A window will appear in which you will see some information about the channel. By pressing the red button on the remote control, you will open a window for entering keys into BISS. Even a child can understand how to further decode satellite channels. Simply enter the keys and save them in the tuner's memory.
What is this all for
And I already said - to gain knowledge, because it’s not right to have paid porn channels for free , and who needs it, after all, there is robbery ? Well, yes, you can also record all the new movies that are usually broadcast on paid channels, but they are not in Russian, although it’s very easy to find sound tracks for them on the Internet... but still, we are law-abiding citizens, aren’t we?
