Setting up the MTS remote control to control the TV using codes from the manufacturer

Most receivers are equipped with a push-button remote control. These devices can also be purchased separately. The remote control for the MTS TV set-top box is a lightweight rectangular push-button device with rounded edges, equipped with an infrared sensor. Commands from this device are transmitted via infrared radiation to the set-top box decoder, where they are converted into a digital signal sent to the TV. The electronic remote device is powered by AA batteries.

Setup by entering a code

How to set up an MTS remote control on a TV? It is enough to follow the procedure described below. Those who have equipment for producing common brands can enter one of the special codes that are indicated in the instructions supplied with the set-top box.

Universal remote settings:

1. Turn on the TV, hold down the TV button until the LED lights up.
2. Enter the value that corresponds to the name of the equipment manufacturer (indicated on the directory pages). Data is entered in 10 seconds, so it is advisable to prepare everything in advance.
3. The LED goes out after a couple of seconds if everything was entered correctly.

If the MTS remote control does not work, then the code was entered incorrectly.

You can try dialing again or configure it automatically. How to unlock the console remote control?

To do this you will need to perform the following steps:

• turning on the TV;
• holding down the key labeled TV until the LED starts flickering;
• This is followed by releasing the button, pointing the remote control towards the TV and waiting for automatic selection to occur.

In this case, a special window will appear on the monitor. When a match occurs, the program will automatically display it. Then you should open the menu and proceed to saving the settings.

This method will work when using equipment from other companies. For example, this way you can select a code for a Samsung TV for further use.

This manufacturer uses almost the same values ​​for ease of control of different equipment (DVD players, etc.). How to find out the code? To configure the equipment, the data entered in the table of the directory that is supplied with this set of MTS set-top boxes is suitable.

Codes

The table shows codes for remote controls that are suitable for TVs of different brands.

Configuring the MTS remote control to control other devices

Depending on the type of remotely controlled equipment: TV, DVD player, stereo system, TV set-top box, etc., there are a number of functional buttons through which the corresponding settings are made.

Each individual device is controlled according to the manufacturer's code.

The device delivery package necessarily includes a reference book of code values. If necessary, the current version of the codes for the MTS remote control can be downloaded from the “Home Internet and Television” section on the provider’s official website.

The code search is performed automatically or manually. Once configured, the above buttons perform the function of switching to control the corresponding device. The STB button, for example, switches to the set-top box control mode, and the TV button activates the TV control mode.

The procedure for manually setting up the remote control

1. Turn on the device (TV or DVD player, etc.).
2. Press and hold for 3 seconds. the corresponding setting/switch button until the LED on the remote control lights up. Manipulation puts the remote control into setup mode.
3. Next, you need to enter the four-digit code value within 10 seconds (previously found out from the reference book). It takes 10 seconds to set the code value. If you managed to meet this period of time and the code was entered correctly, the LED will go off.
4. If an error is made when entering the code (the LED flashes), you can repeat the entry again.
5. Next, you need to check the operation of the main device control keys - sound adjustment, for example, and others.
6. If, as a result of testing the modes, not everything works adequately, you can try installing an alternative code for this model from the reference book.
7. The installation mode ends automatically within 10 seconds. You can speed up the output by pressing and holding the button of the corresponding setting button.

Automatic setting mode

The process is initiated by pressing the corresponding setting button and holding it for 5 seconds. After the remote control enters the automatic search mode (the LED signals by flashing), you should stop holding the button. When searching for a setup code to control a TV and DVD, the automation checks whether the volume is adjusted correctly, and when setting up AUDIO, it checks whether the device is turned off. When the tested modes work correctly, you need to initiate code recording by pressing the corresponding button (TV, DVD, AUDIO or STB).

If necessary, when the settings of the remote control of the set-top box are lost, they can be reset to factory settings in order to make the necessary settings again. All you need to do is press and hold two buttons at the same time. After the LED flashes three times, lower the TV+0 buttons. This manipulation replaces all user settings of the remote control with factory settings.

Basic functions of the remote control

There are several blocks on a standard TV remote control. Their location varies: it all depends on the specific model. Main functions:

1. At the top there is a mute/unmute icon and volume up/down buttons.
2. Next are the channel switching buttons.
3. Another block at the top is designed to switch to one of the modes, thanks to which you can control other related equipment. Each of them is signed. For example, the designation “DVD” is the playback mode of a video player, “AUDIO” is a music center. “STB” – return to the list of encodings for the universal remote control.

You can configure the MTS TV remote control automatically or manually.

Contacting MTS support service

If the MTS set-top box does not turn on from the phone and the remote control, and attempts to restore the equipment yourself are unsuccessful, then you need to seek help from professionals. Complex diagnostics require special equipment. Repairing with improvised means may worsen the problem.

First you need to call customer support. You can contact the call center managers for free; to do this, call the short number 0890. If you plan to call from a landline rather than a mobile phone, then dial the code before the short number. As a result, you need to dial the number 8 800 250 08 90. This is also a free hotline.

You need to explain the problem in detail. Experienced contact center specialists will tell you how to determine why MTS TV does not work on your TV. If the cause of equipment failure is really serious and cannot be eliminated independently, then the subscriber will be informed of the addresses of service centers.

Prepare your passport details in advance, as well as a subscriber service agreement signed with the provider. This will significantly speed up the process of reviewing your application. Consultants identify the subscriber in order to conduct remote equipment diagnostics.

Unblocking

If the remote control is locked, it can still execute certain commands. How to remove the block? First you need to find the reasons for the failure in its operation. The device may stop responding due to dead batteries or the start of one of the modes. First of all, you need to install new batteries. If nothing has changed, you can proceed to setting up the MTS remote control.

This is done in a few simple steps. To remove the lock from the MTS remote control, you will need to perform the following steps:

• holding down the button on the remote control of the set-top box with the designation “MTS” for a couple of seconds;
• dial 0001;
• checking the operation of the device;
• if it does not respond to pressing, you need to enter 0002, 0003, 0004 or 0005.

Basic and special keys

For universal remote controls, a standard set of keys is provided, which are combined into common blocks and perform separate functions. There are also buttons that allow you to select a special mode.

The following are the most practical for users:

• keyboard with numbers for entering passwords, channel numbers in order;
• return to a specific channel;
• cursor, rewind;
• navigation (goes to the profile, displays menus, search lines on the screen, enters the film library, lists of the most frequently visited channels);
• adjusting viewing, rewinding and pausing movies;
• setting up equipment, including searching and compiling a list of TV channels;
• Calling up the settings menu by pressing one key;
• editing a previously compiled list of TV channels;
• creating a list of selected television channels;
• the ability to switch to programs by pressing buttons from 0 to 9;
• return by pressing a key with a rounded arrow icon;
• setting pause, repeat (watching videos up to an hour long);
• creation of an information system about the start of a TV program, information from other online services (for example, YandexTraffic, MTS-weather, etc. (the list depends on the installed software);
• sending requests from the website Omlet.ru (favorite movies, programs, videos);
• blocking individual TV channels as part of the “parental control” option.

Using the remote control

Using MTS remote controls for TVs is simple; any inexperienced user can handle it. First you need to install two batteries, select the control type (one of the listed modes). You can regulate the operation of the equipment according to the instructions using a set of code numbers from the manufacturer (indicated in a special reference book).

Other information is provided on the website of the Russian company.

The MTS remote control is activated by pressing the TV button. After this, it is enough to use the remaining components for control.

How to replace the “native” remote control

For the MTS set-top box, an analogue remote control adapted for the receiver is allowed. You can purchase such a device at any store that specializes in selling consumer electronics. As an alternative, in the process of finding/replacing a faulty remote control, you can use a smartphone to control the viewing of satellite television. For these purposes, you need to find an application for controlling the TV of the corresponding model in the mobile device store and install it. The preferable option is when the TV receiver and smartphone with the installed application are from the same manufacturer.