Technologies are developing more and more rapidly: their diversity gives us new opportunities for comfortable work and leisure. Bluetooth headphones are another technology that can make using a computer, phone or TV much easier. They allow you to watch your favorite programs or play games without disturbing others, while remaining mobile and doing something in parallel. If you want to know how to connect wireless headphones to your Samsung TV, keep reading our article.
What are the connection methods?
Modern Samsung TVs are equipped with a special jack on the rear panel (3.5 mm), which is used to connect headphones. Considering that with this method it is necessary to insert or remove the plug each time, the last element becomes loose and becomes unusable. In addition, if the TV receiver hangs on a special wall holder, the wire length is not always enough, and it is not so easy to reach the socket.
The solution to the problem is to install a digital converter. This provides a number of advantages:
- You can use wireless headphones by setting up operations from the remote control in the TV menu. This does not require physical contact with wires or connectors.
- There is no need to move the receiver while looking for a suitable input for the accessory.
- In a house where there are small children, such a system is especially relevant; their sleep will not be disturbed by the sounds of a movie or program.
Possible problems
Most of the faults arise from the connection diagram and subsequent configuration. Connecting to an old TV set can become an insurmountable difficulty.
If all the connections were made according to the rules, but nothing began to work, you need to check the power supply or test the socket. Additional settings can be made via the remote control.
How to connect wired headphones to Samsung TV
Connecting a wired headset to the TV is not particularly difficult. You need to find the required connector on the back panel of the device and carefully connect the headset using a wire. If the sound comes through the headphones, then the procedure was performed correctly.
This method has two serious drawbacks. When regularly plugging/removing the plug, the chance of the connector becoming loose ; on a TV hanging on the wall, it is inconvenient to reach the required input.
The way out of the situation, as indicated, is to purchase a digital converter that provides direct interaction, without installing a cable into the television connector. Another way to solve the problem is to buy a wireless headset.
Headphones
They work on the principle of transmitting radio frequencies directly to the device. They are connected via a radio channel, which allows you to listen to any TV programs wirelessly. They are connected using special modules that are installed in the audio output of the TV.
Some models of television receivers are initially equipped with a transmitter, so there is no need to purchase additional equipment.
Before purchasing radio headphones, pay attention to the presence of a volume control and their size. They often turn out to be quite inconvenient for the average user.
Connecting wireless headphones via Bluetooth
For TV, there is a huge range of wireless headphones on the market. The products differ from each other in the method and type of pairing. In theory, the headset should be universal and fit any TV receiver. In the case of the Samsung brand, connecting headphones to a TV is focused on original modifications of its own production. The preferred type of pairing is via Bluetooth.
If you have third-party wireless headphones at home, you don’t have to spend money on buying a Samsung headset. You can buy a transmitter with a Bluetooth channel that allows you to connect with any accessories. The devices differ in price from each other. Depending on the number of connected devices. Modern versions of Samsung TVs (5-6 generations) are equipped with a built-in Smart TV option.
The algorithm of actions is as follows:
- Turn on the headphones, select connection mode . The last function is specified in the instruction manual. This usually happens by pressing the activation key and holding it for a short time. The result of the action will be notified by a light indicator (red or blue flickering, indicating that the device is turned on).
- Enter the TV menu. Each modification has its own illustration. Find the “Sound” item.
- Find the "loudspeaker" section, select a column "list of bluetooth headphones". The TV receiver will automatically search for suitable devices with the required operating protocol. A list of detected devices will be displayed. If the headset does not appear, you need to move it closer to the TV and repeat the search (by pressing the “refresh” button).
- Connect Bluetooth headphones to a Samsung TV - select the desired headset model from the list that appears, then select “pairing”. The default access code is "1234" or "0000". Once the connection is established, the sound should go to the headphones.
- To switch the signal from the headphones to the standard TV speaker, simply turn off the headset. If there is no need to use accessories, you can remove auto-connection in the system setup menu. In this case, a message will not pop up on the TV screen asking you to transfer the sound to headphones.
Connecting speakers to Samsung via Bluetooth
With another popular company from South Korea, Samsung, the situation is a little simpler, but still, many users report problems when trying to “connect the speaker to Samsung.” And here people are faced with the impossibility of connecting portable speakers to a TV if they are not of original origin. Nevertheless, a solution was found.
Step-by-step instruction
- First, open the TV settings and go to the “Sound” subsection, and from there to “Speaker Settings”.
- In this case, place the paired device in close proximity to the screen. Bluetooth must be activated on it immediately.
- Now select “List Bluetooth Headphones”. The program will start the search. Having found suitable speakers or a headset, you will automatically activate the connection with the TV.
If we are talking about Samsung “K” series devices, then the actions will be slightly different: “Sound” - “Select speaker” - “Bluetooth Audio”.
Bluetooth is missing or cannot be activated: what to do
There are special devices called Bluetooth transmitters that pair perfectly with any TV. Its purpose is to take sound from the TV via cable and send it via Bluetooth to any wireless gadgets.
Apple TV
You can also connect headphones using the Apple TV , which is equipped with tvOS 11 or a newer version. Previously released headphones do not support versions. Before you begin, turn off Bluetooth to avoid interfering with the connection between devices.
- Turn on the set-top box and TV
- Go to the Apple TV settings menu
- Find the "Remote controls and devices "
- Enter the Bluetooth
- Once your AirPods in the list of available devices, connect to them
The connection is successful, now you need to configure the sound in the headset:
- To adjust the sound, go to the settings menu in the “ Audio and Video ”
- Change the " Audio Out " value to " AirPods "
- Sound volume is adjusted using the remote control
How to Use ANC and Ambient Sound on Galaxy Buds Pro
(Image credit: Regan Coule/Tom's Guide) Active noise cancellation reduces the volume of nearby sounds, while Ambient Sound mode uses microphones to make them clearer. This allows you to enjoy your music with fewer interruptions and also gain extra spatial awareness in busy areas. You can switch between modes in the Galaxy Wearable app under Noise Control, and you can also use it to adjust the ANC intensity of the effect between High and Low settings. Alternatively, if you set one of the tap and hold gestures to toggle noise control using the previous steps, repeating tap and hold will toggle the different modes. Using either method, you can also disable both modes to save battery. There's also a new Samsung Voice Detect feature. When enabled, this setting automatically turns on ambient sound when the microphones detect that you're speaking, and automatically turns off the feature when you're silent for a few seconds. To turn on voice detection, open the Galaxy Wearable app and simply tap the switch. This is under the ANC level controls. You can also tap on the Voice Detection feature itself to set the delay for turning off Ambient Mode: 5, 10, or 15 seconds.
Which Bluetooth headphones to choose for Samsung Smart TV?
The range of Bluetooth headsets is incredibly huge, so it’s easy to get confused. One of the key selection criteria is the connection method.
Main varieties:
- Wi-Fi – provides a large coverage radius, has high throughput and minimal distortion. However, there are few such models and they are expensive.
- Infrared is an undesirable option, as it has a short communication range, and the signal quality leaves much to be desired.
- The radio channel is the preferred option for stationary devices. The signal quality is quite high, as is the capture range. When buying headphones specifically for TV, it is better to choose this option. True, the price is relatively high, and the assortment is poor.
- Bluetooth is the most popular niche of universal models that can be used with almost all devices. They are presented in all price niches and it is quite easy to choose models with suitable sound quality. The disadvantages are that the standard has a short coverage range and there are drops in sound quality.
The right choice is a whole science; you also need to take into account sensitivity, frequency, SOI, autonomy. If you don’t want to bother with such characteristics (they are also difficult to find), we recommend choosing based on reviews.
How to Check Galaxy Buds Pro Battery Level
When connected, the Galaxy Wearable app will show the current battery level of each Galaxy Buds Pro on the home screen. The charging case itself can also give you a rough idea of the remaining charge. Placing the buds inside the case will cause the status indicator on the front of the case to light up with different colors and effects to show how many are left:
- Green: The battery is fully charged or has at least 60% charge remaining.
- Yellow: 30% to 60% battery charge remaining.
- Red: Charging or less than 30% battery remaining.
- Flashing red: This means a charging error has occurred. Remove and replace the buds in the case and contact customer service if this continues.
How to find your lost Galaxy Buds Pro
(Image credit: Samsung) If you've lost your Galaxy Buds Pro, there are a few tools that can help you track down the earbuds. The first, Find My Earbuds, is handy if you've just lost your headphones somewhere at home or at work: 1. In the Galaxy Wearable app, select Find My Earbuds and press Start. 2. This will make the Galaxy Buds Pro beep. Monitor the noises until you find them, then tap Stop in the app. Another option, SmartThings Find, is for when you think the buds are further gone: 1. Download and install the SmartThings app. Tap SmartThings Map Find, then Download to install the add-ons you need. 2. Select the devices you want to find - the Galaxy Buds Pro should be here if you've already matched it. Hopefully the app will locate your headphones and show your approximate position on a map. Remember that SmartThings Find is built on a volunteer network of Galaxy owners and requires that any lost items be within Bluetooth range of one of those owners' phones. . Otherwise, it may not be picked up, which, in turn, will not allow you to see it on the map. In other words, be careful with the Galaxy Buds Pro in remote areas.
