Universal remote control for TV, air conditioner, set-top box and other equipment

Today, it has become popular to use special devices to control televisions and other digital devices. It is for this purpose that a remote control is always supplied with certain equipment, however, like any other device, such equipment can fail, in such a situation it is difficult to find a specific model of the remote control, which is why universal devices are used for Android and other operating systems. In this case, you will need to clearly consider what a universal TV remote control is, and in addition, set up codes to control the corresponding device from a distance.

Any remote control can fail

Original or universal: which remote control is better and their differences

Of course, it is best to have an original remote control for household appliances, since it works perfectly, without any complaints and, if used correctly, will last several times longer. The only disadvantage of a stationary remote control is that it is designed strictly for one type of equipment. Let's take, for example, a universal controller; it will do an excellent job of controlling a refrigerator, TV or music center. But remember, to use the device, you must first connect the remote control to it. It is worth noting that the two device options differ significantly in price. If the original version is expensive, if you buy it separately, then you will buy the universal version for half the price.

Product-Specific Settings

At the moment, there are various options for universal remote controls on sale. In general, the procedure for setting them up is not significantly different, but here you will need to consider in more detail the procedure for setting up such models as:

1. IRC remote controls.
2. Models of Huayu equipment.
3. Versions of technical equipment Gal.

In each individual case there are some differences, which is why all options must be considered in a separate order.

IRC

This is the most budget and popular option for programmable devices. As a rule, to perform the setup, the device is switched to a specific mode. Especially for this purpose, the main key is pressed and a characteristic double blinking from the diode is expected to appear. Subsequently, manual code entry or automatic encoding is performed. At the end, confirmation of actions and a trial test of the device are done.

Huayu

More expensive versions of technical equipment. These device options are compatible with any technology. Here, to configure, you need to reset the settings by holding the main key. Subsequently, the button is held again to enter the mode. At the final stage, the encoding is searched or the value is manually entered with confirmation.

Gal

A medium-priced equipment option that is very popular. To configure this option, you need to do the following. First go to settings mode. Next, confirm the data entry automatically, or enter the code, and then save the changes. What should the double response of the diode indicate?

Important! When performing the appropriate settings, it is recommended to adhere to the order provided in the instructions that come with the equipment.

How does a universal type remote control work?

As a rule, all remote controls that a person uses to control household appliances work the same. The device has a battery or crown. The design of the devices is very similar: they both have keys that are convenient for switching channels, adjusting the volume and using other functions of the equipment. Also, such regulators have special features (depending on the model) that help provide quick access to the Internet or satellite television. The inscriptions on the buttons of universal remotes will quickly wear off due to intensive use. The solution is to put plastic film on the body

HELPFUL INFORMATION!

The universal type remote control is suitable for all devices, without exception, that have the ability to connect remotely via an IR signal. When the configured remote control is launched, an infrared beam signal is sent to the TV receiver, through which all available programs on the installation are launched.

What is the difference between universal remotes and original ones?

All modern specialized devices differ significantly from the original models for controlling televisions. As a rule, the following main differences can be distinguished:

• First of all, you should pay attention to the price; universal devices cost many times more);
• unlike original devices, the second option is easier to find in the public domain;
• universal devices are suitable for use with any electrical equipment;
• The key layout may differ significantly, as well as some signal delivery parameters;
• In addition, a major difference lies in the need to program universal fixtures.

In this case, the main differences between this type of equipment are presented, but in practice you may encounter other nuances that have minor differences.

Correctly setting up a universal TV remote control: important steps

You always purchase a universal remote control separately, and its cost absolutely does not depend on what functions the device will perform in your home. However, it always comes with an instruction manual. But such manuals do not always have a configuration method; it is for these cases that we have prepared this section. Mechanical wear and tear on the remote control may require the purchase of a new universal accessory. Instead of a mechanical method of synchronizing a universal type remote control with the TV, you can use an automatic process. To do this, you should perform a number of actions:

1. To start automatic search for TV channels and radio stations, you need to press the POWER button and hold it for 6 seconds. In this case, the remote control must be strictly aimed at the TV receiver.
2. After this, the light on the remote control will light up, indicating successful setup. Please note that after connecting the remote control, the VOLUME symbol should appear on the TV.
3. Once the value is displayed, the button can be released. Next, check the functionality of the used remote control.

If moisture accidentally gets on the remote control, it may become inoperable.

HELPFUL INFORMATION!

In some cases, it is possible to configure a universal remote control without a special code. However, such synchronization is possible for several TV models.

Instructions for setting up a universal remote control for a TV without using a special code

The method of connecting the remote control without a code implies a simplified version of synchronization, which saves you from having to search for a code and enter it. To do this, we will use active buttons:

1. Be sure to start the TV and turn it on one of the channels that transmit the signal well.
2. We simultaneously press the SET and TV keys. You will need to wait until the POWER key indicator lights up.
3. Next, press the POWER button every second. Wait for the TV to respond to your action.
4. The response may vary depending on the model: adjusting the volume or switching channels.

If the remote control breaks down, it is better to return it to the store under warranty or send it to a service center for repairs.

IMPORTANT! The active keys on different remotes are also different.
Often these are buttons labeled TV, SET, DVB, POWER. In this case, an indicator light is considered an important design attribute, which signals the reaction to the connection.

List of TV codes

Now let's look at the most popular codes for modern TVs. As mentioned earlier, often a whole group of different combinations corresponds to a brand. In this case, either all or some of them will work, which forces you to repeat the procedure several times. The list of current options is as follows:

• Acer: 1139, 1644, 2190;
• Allstar: 0037, 0556;
• BenQ: 1523, 1562, 1574, 2214, 2402;
• CTC: 0247;
• Daewoo: 0634, 0714, 1661, 1375;
• Hitachi: 1585, 0036, 0349, 0877, 0473, 0217, 1667;
• LG: 2182, 1265, 0001, 1859, 1840;
• MTC: 0512, 0361, 0370;
• Nokia: 0610, 0374, 0631, 0480;
• Panasonic: 2264, 0250, 0367, 0226, 1636, 0556, 0037;
• Philips: 1454, 0200, 0361, 1593, 0605, 2665;
• Pioneer: 0486, 0556, 0361, 0287, 0679, 0760;
• Samsung: 0264, 0766, 1312, 1243, 0060, 0217, 0618, 2051;
• Siemens: 0037, 0361, 0554, 0191;
• Sony: 0810, 1625, 1505, 0834, 0000;
• Supra: 0009, 0374;
• Tesla: 0610, 0715, 1037, 0556.

Download the full list of codes in PDF format

If your TV brand is not on the list, then it is recommended that you read the full document from Rostelecom PJSC. These are detailed instructions for using the Wink set-top box from the provider.

Table of codes for connecting universal remote controls when operating with a TV

The same connection code will not work for each type of TV (brand and model), since this password is considered a kind of protection against unauthorized connection and reducing the risk of infection of the TV platform with a virus or malware. To prevent this from happening, UPDU manufacturers have developed special codes. A cheap model often has a low-quality housing, which at the slightest impact will lead to cracks and chips on the device. For each popular brand of TV receiver, you can see their purposes in our table.

When entering the code on Chinese universal remotes when connecting it to the TV, carefully press the buttons. If they have Chinese characters, then first you need to know the translation, otherwise you won’t be able to quickly set up.

Setting up a universal remote control depending on the brand: SUPRA, GAL, HUAYU

Often, the settings of remote controls for universal use differ, but they may be similar for TV models or other household appliances from the same manufacturer. Let's look at several options for remote controls and their connection capabilities.

Controlling household appliances from a smartphone is not always reliable

SUPRA TV remote control model - connection method

Depending on the model of the universal remote control, its settings will differ, since the external design of the buttons may be different. Let's look at the setup guide for the SUPRA model: Also, a special key fob can play the role of a universal remote control for devices

1. First, find the connection code (it may be useful) specifically for your TV model. Then start the TV and place the remote control strictly perpendicular to the device.
2. On the remote control, hold down the POWER key and hold it down until you enter the assigned code. After which the remote control indicator should blink twice. At this point the setup can be completed.
3. Be sure to check the functionality of all buttons on the control device. If they are all responsible for their functions, then the setup is done correctly. Otherwise, you need to reconnect.

If the connection fails the first time, there is no urgent need to replace the device. If all the equipment is working, try setting it up again. Since all universal-type remote controls differ in configuration and modification, they have to be set up using several attempts. Since the majority, having read the instructions inattentively, begin to act at their own discretion.

Possible problems

It may happen that when controlling the receiver, television equipment is controlled at the same time, for example, you switch channels on the receiver, but at the same time you can open Rostelecom channels and switch them on the TV. And sometimes, on the contrary, the TV does not respond to commands. This means that the TV and receiver codes coincided when setting up the Rostelecom remote control.

To remove this conflict there are 5 number combinations 3220-3224. To do this, press the usual OK and TV buttons until the TV button flashes twice (to enter the programming state). Now you can enter one of the codes. If it does not fit, the others are checked one by one.

As you can see, setting up a universal remote control is not a difficult task. The device comes with detailed instructions. And in any case, you can always contact Rostelecom technical support for any questions you may have.

Hello, today I’ll tell you how to configure the Rostelecom remote control for your TV. Initially, it only works with the STB set-top box - it switches channels and performs functions from the menu.

In order for it to enter the TV control mode - increase and decrease the volume, turn the TV on and off, there are three settings options, including a new method.

The article also described the algorithm for resetting settings and eliminating the conflict between the console and TV remote controls.

Universal remote control for all GAL TVs: how to synchronize with TV

In fact, the manual method of connecting the remote control unit is considered the most reliable and practical. Despite a few long steps, you end up with a fully functional TV and all its options. Let's start setting up: Even among such devices, there are better models that users prefer

1. All remote controls come with instructions and a set of codes. If for some reason you do not have such documents, then use the table of codes for popular TVs above in the article.
2. Press the TV key and hold it until the indicator light comes on (all universal remote controls have it). Usually this takes 3-5 seconds.
3. Then you need to enter the appropriate code for your TV model. It is quite possible that you won’t be able to guess it right the first time. Only when the indicator goes out can we assume that the settings have been made correctly.

HELPFUL INFORMATION!

Be sure to check the remote control after all setup steps to ensure that all TV options are working. If some of the buttons do not work, then the accessory needs to be reconfigured, therefore, look for a different combination of numbers.

Remember that the remote control via your phone can only work if it has an infrared port

Step by step guide on how to set up your Huayu universal remote

Huayu brand UPDU is one of the popular accessories that people use when they lose the original device. In this case, before setting up the control device, you need to go through three steps:

1. Using the combination we find, we fix the connection between the remote control and the TV. To do this, enter the code from the instructions for the model, after holding down the SET key. The volume indicator should appear on the TV receiver screen. After this, you can release the SET button.
2. Check how the buttons on the device work, if everything is correct. Save the code. To do this, press the SET and OK buttons simultaneously.
3. If the remote control is not functioning correctly, try selecting the code again.

You can determine the combination number by the indication on the control device itself. To do this, you need to press and hold the INFO and SET buttons at the same time. After which the indicator signal will help determine the required numbers by flashing.

Many virtual remote controls are capable of controlling devices for various purposes.

Setting up the Beeline remote control

Standard Beeline remote controls belong to special set-top boxes and consoles, however, there are models that can be designed to remotely control any TV. To set up such a device, you must correctly follow all the points from our instructions:

1. To configure the control correctly, your TV receiver must be turned on. On the remote control you need to press the TV key.
2. Next, find the OK button on the remote control (usually in the center of the remote control) and hold it until the device finds the required connection code. He will notify you of this by turning off the TV.
3. After this, release the OK button and check the functionality of the device. After which you can use the TV and watch channels.

There are applications that completely replace a stationary remote control for any type of equipment. Automatic setup is considered one of the simplest manipulations for synchronizing universal remote controls with a TV. However, mechanical adjustment can be used if the first method fails to connect the remote control device.

How to find out the combination

All possible combinations are presented by the provider himself on the official website. Section 19.1.1 contains a complete list of official codes. Use the web address: https://rt.ru/sites/default/files/doc/Spravochnik_polzovatelya_IPTV_Wink.pdf .

There you can download a separate document with a complete table to your computer.

Most TV brands have several different codes. Sometimes you have to try several combinations before one of them works. In our article you can familiarize yourself with the most common codes.

How to quickly set up a universal type remote control for an air conditioner

Most universal remote controls that are suitable for split systems are provided in a foreign language. Accordingly, an ordinary Russian is unlikely to cope with studying the manual, so we suggest making the connection as follows:

1. Turn on the remote control for setup.
2. Enter the required code on the remote control for a specific air conditioner model, after holding down the SELECT button.
3. It happens that the instructions do not provide a combination of numbers. Then you can try to configure the remote control device automatically.
4. If the code does not match, continue to press the SELECT key until the correct combination is highlighted.

Self-revocation of the split system will occur when the code is selected automatically. After this manipulation, the air conditioner using the universal remote control will work in the same way as with the original one.

Many TVs or air conditioners can be connected to a universal remote control only if they have built-in Wi-Fi

TV codes for Rostelecom remote control

Here are some of the codes for the Rostelecom remote control for the most used TV models:

• LG: 0001-0037-0178-0556-0606-0698-0714-0715-1149-1232-1265-13305-1319-1423-1637-163-1681-1768-1840-1842-1859-1860-2182- 2057-2731-2362;
• Samsung: 0009-0037-0060-0072-0163-2051-0217-0264-0370-0556-0587-0618-0644-0766-0814-0812-1037-1235-1243-1249-1312-1458-1584-1619 - 1630-1678-2103-2137-2094-2097.

As you can see, the list of manufacturer data codes is quite impressive. If we take less popular models, the list will be much shorter:

• Sharp: 0036-0053-0093-0200-0818-0852-1163-1193-1393-1659-1667-1935-2214-2402-2810;
• Rolsen: 0037-0556-0819-1371-2098-2037-2001;
• Codes for the Rostelecom remote control for the Supra TV are limited to only two combinations: 0374 and 0009.

But in the remote control code directory, the Fusion and Mystery models are completely absent. In this situation, it is better to search using automatic selection. Or sequentially select combinations from the directory. You may notice that for different models some numerical sequences are repeated. Accordingly, they may also fit your TV.

If all else fails, you can contact the company’s consultation center. Fortunately, there are many options:

• Free hotline 8 800-10-00-800;
• Social networks: Twitter, Facebook, VKontakte, Odnoklassniki, Instagram, Flickr;
• Feedback form on the company website.

Common errors and questions regarding the operation of the UPDU

Often, users are faced with the problem of unlocking universal remote controls or lack of response to any of the connection methods. If the store did not check your device for maximum functionality, then you should do it at home if synchronization with household appliances fails.

If you don't have the skills, don't fix the remote control yourself, much less the TV.

Battery failure is the most common problem

Due to being in the store for a long time, the batteries in the remote control could leak over time or spontaneously discharge. In this case, you will have to replace them with a full-fledged power supply.

If you plan to replace your native remote control with a mobile application, then download it only from official sources

The reason is the design features of the remote control

To determine whether the remote control sends a signal to the TV receiver, it is necessary to evaluate the performance of the IR radiation. For convenience, you can use a simple digital camera: point the remote control at it while one of the buttons on it is pressed. If the light does not respond, then the remote control needs to be replaced. With a universal remote control, you can also control a satellite set-top box, but there may be some synchronization nuances here.

Minor Factors

Foreign objects that may be located near the TV can also affect the normal functionality of the universal remote control. For example, the placement of microwave ovens, radios, and Wi-Fi routers is unacceptable, since these devices emit radio signals in the form of waves that can be perceived by an infrared emitter. Due to this, the signal from the remote control will be lost and will not reach the receiver itself. Yandex.Story is a large market where you can choose an application with specific functions: for TV, air conditioner, set-top box

How to set up a universal remote control for household appliances via a smartphone

If at the moment it’s inconvenient for you to run to the hardware store, and you need the remote control urgently, why not use a functional smartphone? In order to install such a function on it, you need to specifically download the application from PlayMarket or AppStory resources. After this, you need to activate the mobile remote control using a special activation code. If you have been using a universal remote control for a long time and suddenly some buttons stop working, check the contacts for oxidation. In this article, we looked at the most popular remote controls and how to configure them. If you have any questions or have personal experience in using such accessories, be sure to share it in the comment form. We will be glad to receive your requests.