About the smartphone - prices, reviews and real customer reviews

Characteristics of World Vision digital set-top box models

*The table contains blank data in the cells with price and DVB-T2 tuner model. In the case of price, the reason is that not all consoles are still on sale and are at the testing stage or have been completely discontinued. In the tuner model data, we were unable to find out the “filling” of some consoles from the manufacturer. Perhaps this is a trade secret or the data has not yet been added.

Instructions for connecting World Vision set-top boxes to TVs

According to our observations, the most popular World Vision set-top boxes at the moment remain the following models: Premium , T62A and T62D . That is why we will take screenshots of equipment for further instructions for these consoles.

However, we dare to assure you that the instructions are equally suitable for any of the device models of this company, the main thing is to do everything in the same way as the review. The general connection diagram is as follows

The antenna is connected directly to the digital set-top box through the corresponding input. In this case, the connection to the TV itself is made by ONE of 3 options:

1. Via HDMI cable. Such a wire is usually not included in the kit. However, if your TV has such an input, then it must be used first. The thing is that HDMI provides the best image quality and is generally more durable. It is best to buy a cable from trusted companies: Twisted Veins, Mediabridge ULTRA, Monoprice. A meter of their cable will cost 2-3 times more than cheap analogues, but their quality will be 5 times higher.
2. Via RSA (tulips). Particularly relevant for TVs older than 7-10 years of production. These models do not have HDMI, but there are multi-colored inputs for RSA. They are also called “tulips” for their corresponding color. 2-3 meters of this cable are often included with the set-top box. Its quality leaves much to be desired and when using it, be prepared to replace it after 2-3 months of active use. On some TVs you will find options in which you will need to connect not 3, but 2 or 1 RSA output. The principle does not change here, the main thing is not to make a mistake with the colors.
3. Using converters and adapters. This is especially true in case of absence or failure of any output on the TV.

1. Adapter from RSA to SCART. A special SCART output can be found on TVs that are more than 10 years old. According to our observations, many subscribers still have such “tenacious” TVs. In stores, the adapter can be seen for 200-300 rubles.
2. RSA-HDMI signal converter. It may be useful if, for example, the output for “Tulips” on your TV is broken. Costs vary, from 500-1000 rubles on average.

Regarding adapters, we will say that they should be used only in case of urgent need. It just doesn’t make sense to resort to their help.

After the device is connected, to turn on the set-top box and check the connection, you must do the following:

1. In the TV menu, go to the signal display mode you need. For HDMI, this is the corresponding mode. For RSA, AV (Audio-Video) is usually selected.
2. After this, you can turn on the set-top box and press the power button on the remote control.
3. If the welcome menu appears, then the connection was made correctly and you can begin directly setting up digital channels.

World Vision set-top box does not find channels

Has the image disappeared from the screen? The reasons are as follows:

• system failure;
• technical malfunction of the device;
• internal breakdowns.

How to connect the Rostelecom remote control to an LG TV: codes, instructions

We recommend updating your system and downloading the new update. Also try turning on the receiver and antenna again.

Does not respond to the remote control or the button does not work

The remote control does not work if there is no charge. Press all the buttons and check that the device is working properly. No signal? Insert new batteries and try again.

No signal

The “No Signal” error is due to temporary interruptions. Wait a couple of minutes and turn on the TV again. Often, the problem goes away within a few minutes.

Poor image quality

Image quality varies depending on weather conditions. First check if the antenna is working properly. Turn it towards the tower to improve the signal. Also use an amplifier to improve picture quality.

World Vision has been operating in our market for more than 16 years. Currently, the manufacturer sells more than 40 types of DVB-T2 set-top boxes and this allows it to be among the 2-3 most popular digital equipment companies in our country. Just think about it, in just 13 years they were able to sell 10 million units of receivers. This, in turn, allowed them to release new models that meet all digital television standards and can receive all 20 free channels without any problems.

• World vision t62d

Today we will talk about this manufacturer in more detail. We will study the connection procedure, and also show a visual overview of searching for digital channels from World Vision devices. Additionally, we will try to answer the questions that have accumulated regarding these set-top boxes and provide the most possible causes of certain problems with the equipment.

Search and configure 20 digital channels on World Vision set-top boxes

When you connect any of the World Vision set-top boxes for the first time, a special welcome message should appear on the TV, in which you will be prompted to quickly set up the device. In any case, if the antenna selection was made correctly, the tuner will be able to independently configure all available channels. To do this you need:

1. Go to the device menu by pressing the corresponding button on the remote control.
2. Press the “Menu” button and go to the search section. Specify in the DVB-T2 range item. If the antenna has a signal amplifier, then also switch the power to “on”.

3. Select “Auto search” and click “OK”.
4. The set-top box will search across all available frequency ranges. The search will continue for 5-10 minutes. During this time, the device will save the entire available channel list and save the settings when finished.

The auto-search function is very convenient in cases where there is a stable signal and the antenna itself is well-tuned and is capable of receiving a digital signal without problems.

Manual search

If there are problems with the signal strength or the device cannot detect the required number of channels for no apparent reason, then you should repeat the search procedure in manual mode. The sequence of actions is as follows:

1. Go to the console menu, to the search section.
2. Select “Manual search” there and press “OK” on the remote control.
3. After that, go to the Internet and open the interactive map of CETV. We indicate your area of ​​residence on it and write down the parameters of the television tower closest to you. We will be interested in the channel number for RTRS 1 and RTRS 2.
4. In the set-top box menu, first indicate the number of the first channel from the card. At the same time, we check that the power and quality of the signal changes from 0% to some value. In this case, it is not necessary to have 100%. In some areas of residence, 60%, 70%, etc. is enough for normal broadcasting...

5. Click “OK”. The search will find available TV channels and radio.

World Vision Set-top Box - How to connect and configure channels

World Vision has been operating on the Russian market for a decade and a half.
Currently, the manufacturer sells more than 40 types of DVB-T2 set-top boxes for digital television, and this allows it to be among the 2-3 most popular television equipment companies. Just think about it, in just 13 years they were able to sell 10 million units of receivers. This, in turn, allowed them to release new models that meet all digital television standards and can receive all 20 free channels without any problems. Today we will talk about this manufacturer in more detail. We will study the connection procedure, and also show a visual overview of searching for digital channels from World Vision devices. Additionally, we will try to answer the questions that have accumulated regarding these set-top boxes and provide the most possible causes of certain problems with the equipment.

Setting up WiFi on World Vision set-top boxes

In most digital set-top boxes, the connection to the Internet occurs through special Wifi adapters. On World Vision devices this can also be done using an RG-45 connector. This is a standardized connector that is likely to be found in any PC.

Connection to WiFi is made by connecting the set-top box with a special adapter via the USB input. At the same time, you need to buy not the first one you come across in the store, but exactly the one recommended by the official manufacturer World Vision.

After connecting the set-top box to the wireless network, the owner will have access to the following functions:

1. Updating and firmware of the console.
2. Watching videos from the YouTube portal.

To connect to an existing wireless network, you must:

1. Go to the device menu and in the “System” section select “WiFi Settings”.

2. Then select the device in the menu - Wifi and click OK.

3. The set-top box will search for available wireless networks. When finished, the full list will be shown. From it we need to select the one we need and enter the password for it.

After saving the settings, you will be able to freely watch YouTube directly from the console.

How to connect WI-FI to the World Vision Premium receiver

The premium brand receiver quickly connects to the router and home Internet. To do this, take a USB cable. You can buy it at any hardware store. Enter the modem password and go to the “network”. Use the Internet to search for movies, TV series and clips. Watch online or record to watch again.

Possible problems and their solutions

Possible problems are related to device failure or cable connectors. Try turning the tuner off and on after a few minutes. Check the antenna's functionality. Due to weather conditions the signal is poor. In addition, the receiver may break. Examine the condition of the receiver yourself. In the event of a serious breakdown, use the help of a service center.

Firmware for World Vision tuners

A software update is necessary in the following cases:

1. When the set-top box starts to work inadequately: reboot, freeze, or refuse to connect to the TV.
2. When will a new, stable version of the software be released?

To update you need:

1. Download the latest version of the set-top box software from the official website. The firmware format will be .bin.

2. Write the file to a flash drive with the Fat32 file system.
3. Insert the USB drive into the console and go to the menu.

4. In the “System” section, select “Software Update”.
5. Then update via USB.

6. Specify the path to the file and click update.

Connection diagram

RCA cable

One of the easiest ways to connect a digital receiver to a TV. Before connecting the cable, both devices must be de-energized. Then insert the cable plugs into the sockets on the receiver. Each plug must be inserted in accordance with the color of the socket on the console. The cable with the yellow plug carries the video signal, and the white one carries the audio signal. Next, connect an indoor or outdoor antenna to the receiver into the appropriate socket (indicated “RF IN”)

HDMI connector

The HDMI interface has the ability to transmit a high quality signal. The video quality can be up to 1080p, and the audio signal can be 192 kHz. This feature meets high standards in the field of multimedia content.

Antenna cable

This type of connection is used to connect a digital receiver if the TV receiver has no other connectors in addition to the antenna input. In this way, they often connect the receiver to an old TV by plugging the cable into the “RF OUT” jack.

World Vision Errors

During the operation of the site, we have accumulated a lot of questions from subscribers regarding World Vision set-top boxes. For some topics we will try to answer and provide possible solutions to problems.

The set-top box does not search for channels / finds less than 20

1. Try searching manually.
2. Make sure you select the correct antenna. If the distance to the TV tower in your region is more than 10 km, then you will need an outdoor antenna with a signal amplifier.
3. Check the antenna cable for integrity.

The device does not connect to the TV

1. There may be problems due to old software. It needs to be updated.
2. Check the cable connecting to the TV. In 30% of cases the culprit is just a wire.

The console reboots or freezes

1. Update your software.
2. Reset to factory settings.

How to set up a learning remote

In total, the universal remote control has 4 programmable buttons: TV Power, Vol+-, AV. To program them, you must press the OK and 0 buttons simultaneously, the red light should light up. After this, place another remote control opposite the student and press the button on the second one that you would like to program. After that, on the original remote control, press and hold the button that you would like to transfer. It is necessary to hold it until the remote control is not trained, the diode blinks 2 times. At this point the learning process can be considered complete.

Why does the receiver only find 10 channels?

There are 20 free channels broadcast in Russia that you can watch with its help.

The most important advantage of switching from analogue to digital TV is that this requires nothing more than a set-top box and a regular antenna, and the image quality is much better. You don’t have to pay any subscription fee—it’s enough to spend once on a set-top box. They are inexpensive - 1500-2500 rubles.

The World Vision T65M digital receiver is used to receive terrestrial digital television.

There are 20 free channels broadcast in Russia that you can watch with its help.

The most important advantage of switching from analogue to digital TV is that this requires nothing more than a set-top box and a regular antenna, and the image quality is much better. You don’t have to pay any subscription fee—it’s enough to spend once on a set-top box. They are inexpensive - 1500-2500 rubles.

How does it all work?

Digital television is called such because the transmission of television images and sound occurs using digital encoding of the video signal and audio track. Unlike analog TV, digital TV is not affected by interference. Therefore, a digital channel will either work perfectly or not at all - there are no such noises as in analog broadcasting, such as artifacts or ripples.

As mentioned above, to migrate from analog to digital, you only need an antenna and a set-top box with a DVB-T2 tuner (namely DVB-T2, the outdated DVB-T will not work), support for the MPEG4 video compression standard and the Multiple PLP mode. Actually, the set-top box itself is a signal decoder from your antenna. In World Vision T65M, digital signal reception is provided by a highly sensitive Rafael Micro R836 tuner.

This set-top box can use an HDMI or RCA cable (“tulips”) as an input interface.

Some models may have a SCART connector. If your TV has an HDMI connector, then HDMI will be the priority option - the “picture” quality is much higher than on RCA. But such a cable was not included in the kit - you will have to buy it separately. When connecting via RCA, we adhere to the standard connection scheme. The yellow plug is for the video signal. White - for the left audio channel (mono). Red - for the right audio channel (mono)

Antenna

The antenna must be selected depending on the distance to the TV tower. There are both indoor and outdoor antennas, but regardless of location, the antenna must operate in the UHF range and receive frequencies from 470 to 860 MHz. Indoor antenna

Suitable for working within the city with a transmission tower.
An external antenna
is required in cases where the TV tower is located at a distance of more than 15 km. An antenna for DVB-T2 can be bought in places where the receivers themselves are sold. With this choice, high-quality signal reception is guaranteed due to the fact that the antenna is specially designed for a digital receiver.

Tip: Before purchasing components, check with your neighbors about what type of antenna they have installed and whether it is suitable for your area.

Also, when choosing, you should pay attention to the presence of a built-in amplifier, without which, if you are far from the transmitter, there will not be good picture quality.

Receiver setup

When you turn it on for the first time, the startup screen will be in Ukrainian.

Use arrows to select Country (Kraina/Region) to Russia. In the Language section (Mova/Language), select Russian. Resolution can be left at 1080 dpi

Next, an automatic channel search will start. Basically, if everything is connected correctly (and this is only the antenna)

If automatic tuning does not help, then try correcting, moving, raising the antenna and starting the search again through the main menu:

Manual search

To manually search, you must enter the frequency or TV channel number. To do this, in “Search for channels” select “Manual search”

Next we will see the search settings:

What settings should I set here?

In order to answer this question, you must first go to the CETV Interactive Map service.

Next, we find our locality. If it is very small and not marked on the map, we look for the closest one to it. One or more towers will be located nearby. To find out the radius of its action, just click on it and select the desired multiplex (there are two in total). By the way, please note that the status of both is broadcast:

Accordingly, to check the coverage area of ​​the tower, we first select “RTRS-1 TV Channel Package”, then “RTRS-2 TV Channel Package”

This way you can check whether digital terrestrial television will be available in your locality. In parentheses for each TVC there is a frequency parameter (in mgHz) - this is exactly the parameter that we must set when manually setting up channels (the only thing that can be converted to kHz)

Shows only 10 channels out of 20

This problem is quite common among those who switch from analogue television to digital. When searching for channels, it can find either the first 10 or the second 10 channels, but not all 20 together.

Check strength/quality parameters

Go to “Channel Search” - “Manual Search”. At the bottom of the screen you see two parameters - signal strength and signal quality. Ideally, they should both be at 100%, however, in our experience, values ​​of 60-70% are quite enough for normal operation

Question answer:

How much does it cost?

The advantage of RTRS digital terrestrial television is the absence of a subscription fee. You don’t need to sign an agreement, you don’t need to pay anyone - it’s truly free. TV channels are broadcast without encoding and are freely available

What is the resolution and quality in digital terrestrial television?

The broadcast is in a resolution of 720 by 576 pixels (SD quality).

Can the set-top box be used on multiple TVs?

You can use it - it’s not for nothing that the set-top box has several interfaces for connection (HDMI/RCA). However, it is worth considering that both TVs will have the same picture and sound. To watch different programs in different rooms, you need a separate set-top box for each TV.

How to record programs on a flash drive?

Recording settings are located in “System Settings” - “Timer”. Here you select the channel, date and time to start recording

Digital set-top boxes from the World Vision brand are among the most popular, due to their price and abundance of functions. Many World Vision models have the ability to connect to the Internet using Wi-Fi. Also, these set-top boxes can receive Terrestrial digital and Cable digital television, thanks to which many cable operators use these budget set-top boxes. The most popular models are T62A and T62D, there is also a Premium model, but it is a little more expensive, although it has similar functions.

How to connect the set-top box

The World Vision kit includes the digital set-top box itself, a remote control, a PCA cable for connecting to TV, batteries, and instructions.

You can also use an HDMI cable to connect a digital set-top box to your TV. If there are corresponding connectors on the TV panel. If you have an old TV, use the PCA cable that comes with the kit, you need to connect it according to the lights, yellow video, red and white wires are audio.

• First of all, turn off the power supply to the TV and set-top box and only then start connecting.
• The next step is to connect the antenna cable to the antenna input of the digital set-top box using a plug.
• Connect the video cable to the appropriate jacks on your TV and set-top box.
• After this, we connect the power supply to the TV and set-top box.
• You need to turn on the video channel on your TV; in some models it is called AV.

Receiver (set-top box)

There is such a large selection of DVB receivers on the market that it is quite easy to make the wrong choice and overpay for features you don’t need. It is advisable to choose a set-top box based on your needs, since all receivers receive the TV signal equally; a distinctive feature of the models are additional functions. For example, if, in addition to the direct purpose of the receiver, you want to use the device as a media player for viewing files from a flash drive, then a model with such options should be selected.

Premium segment receiver models have the “Scheduler” and TimeShift options. These features make it possible to record broadcasts at any given time, without requiring your presence. You just need to set the start and end time of the recording. Often, a special remote control is included with the receiver, with which you can control both the set-top box itself and the TV.

Setting up channels

Channels are configured on the set-top box itself and its remote control is used. The TV remote control is only needed to turn the TV on and off.

• Click on the Menu button and go to the Search or Channel section.
• Since World Vision set-top boxes are suitable for cable and over-the-air broadcasting, we select the desired search range.
• We choose DVB-C if you have cable TV.
• Choose DVB-T2 if you want to tune channels from the antenna.
• Search type All.
• Click on Autosearch and wait for the scan to finish.

Manual search for digital channels

On the World Vision set-top box, you can set up digital television using manual channel tuning.

• To begin, select the broadcast format Cable (DVB-C) or Broadcast (DVB-T2) in the Search item.
• Next, go to Manual Search.
• For cable television it is necessary to enter Frequency, Baud Rate, Modulation. Check with your provider for these parameters.
• For Terrestrial reception via antenna, you only need to enter the frequency and click on start.
• After updating the frequency, the Power and Signal Quality will be shown; the higher the indicators, the better.

Connecting a digital receiver to a TV

The rapid development in the field of television broadcasting makes it possible for digital television to receive high-quality television programs in comparison with analogue. Before connecting the receiver (set-top box), you need to decide on the choice of antenna (receiving device). To watch digital television you need to connect the receiver to the TV.

To watch terrestrial TV you need:

Internet setup.

In order to set up the Internet in the T62A, T62D, etc. set-top boxes, you need a wi-fi adapter, since these models do not have the option of a wired connection. There is also no wi-fi module and therefore you need to buy additional wi -fi adapter equipment.

After the Wi-Fi adapter is connected, you need to go to the settings of the set-top box in the System item.

Wi Settings section , where you need to update the available networks and, having found yours, enter the password for it to connect.

Next, go to Media Center and select Internet from the list. Here is a list of downloaded applications YouTube, IP TV, mail, weather, etc. Click on the desired application to get started.

As you can see, World Vision set-top boxes have many features that are missing in other budget models. It is possible to watch digital television in different formats and access the Internet.